Quartus II管脚批量分配文件（.tcl）格式

 package require ::quartus::project

 set_location_assignment PIN_E1   -to clk

 set_location_assignment PIN_A11 -to data[]

 set_location_assignment PIN_A12 -to data[]

 #

 # Clock / Reset

 #

 set_location_assignment PIN_J15 -to rst_n_pad_i

 set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to rst_n_pad_i

 set_location_assignment PIN_E1 -to btn_n_pad_i

 set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to btn_n_pad_i

 set_location_assignment PIN_R8 -to sys_clk_pad_i

 set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to sys_clk_pad_i

 #

 # UART0: RX <-> GPIO_2[] (Pin , bottom header)

 #        TX <-> GPIO_2[] (Pin , bottom header)

 #

 set_location_assignment PIN_A14 -to uart0_srx_pad_i

 set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to uart0_srx_pad_i

 set_location_assignment PIN_B16 -to uart0_stx_pad_o

 set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to uart0_stx_pad_o

 #

 # I2C0: Connected to the EEPROM and Accelerometer

 #

 set_location_assignment PIN_F2 -to i2c0_scl_io

 set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to i2c0_scl_io

 set_location_assignment PIN_F1 -to i2c0_sda_io

 set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to i2c0_sda_io

 #

 # Accelerometer specific lines

 #

 set_location_assignment PIN_M2 -to accelerometer_irq_i

 set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to accelerometer_irq_i

 set_location_assignment PIN_G5 -to accelerometer_cs_o

 set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to accelerometer_cs_o

 #

 # I2C1: sda <-> GPIO_2[] (Pin , bottom header)

 #       scl <-> GPIO_2[] (Pin , bottom header)

 #

 set_location_assignment PIN_D15 -to i2c1_sda_io

 set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to i2c1_sda_io

 set_location_assignment PIN_D14 -to i2c1_scl_io

 set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to i2c1_scl_io

 #

 # SPI0: Connected to the EPCS

 #

 set_global_assignment -name RESERVE_FLASH_NCE_AFTER_CONFIGURATION "USE AS REGULAR IO"

 set_global_assignment -name RESERVE_DATA0_AFTER_CONFIGURATION "USE AS REGULAR IO"

 set_global_assignment -name RESERVE_DATA1_AFTER_CONFIGURATION "USE AS REGULAR IO"

 set_global_assignment -name RESERVE_DCLK_AFTER_CONFIGURATION "USE AS REGULAR IO"

 set_location_assignment PIN_C1 -to spi0_mosi_o

 set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to spi0_mosi_o

 set_location_assignment PIN_H2 -to spi0_miso_i

 set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to spi0_miso_i

 set_location_assignment PIN_H1 -to spi0_sck_o

 set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to spi0_sck_o

 set_location_assignment PIN_D2 -to spi0_ss_o

 set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to spi0_ss_o

 #

 # SPI1: Connected to the AD converter

 #

 set_location_assignment PIN_B10 -to spi1_mosi_o

 set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to spi1_mosi_o

 set_location_assignment PIN_A9 -to spi1_miso_i

 set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to spi1_miso_i

 set_location_assignment PIN_B14 -to spi1_sck_o

 set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to spi1_sck_o

 set_location_assignment PIN_A10 -to spi1_ss_o

 set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to spi1_ss_o

 #

 # SPI2: MOSI <-> GPIO_2[] (Pin  , bottom header)

 #       MISO <-> GPIO_2[] (Pin  , bottom header)

 #       SCK  <-> GPIO_2[] (Pin  , bottom header)

 #       SS   <-> GPIO_2[] (Pin , bottom header)

 #

 set_location_assignment PIN_C14 -to spi2_mosi_o

 set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to spi2_mosi_o

 set_location_assignment PIN_C16 -to spi2_miso_i

 set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to spi2_miso_i

 set_location_assignment PIN_C15 -to spi2_sck_o

 set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to spi2_sck_o

 set_location_assignment PIN_D16 -to spi2_ss_o

 set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to spi2_ss_o

 #

 # SDRAM

 #

 set_location_assignment PIN_P2 -to sdram_a_pad_o[]

 set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to sdram_a_pad_o[]

 set_location_assignment PIN_N5 -to sdram_a_pad_o[]

 set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to sdram_a_pad_o[]

 set_location_assignment PIN_N6 -to sdram_a_pad_o[]

 set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to sdram_a_pad_o[]

 set_location_assignment PIN_M8 -to sdram_a_pad_o[]

 set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to sdram_a_pad_o[]

 set_location_assignment PIN_P8 -to sdram_a_pad_o[]

 set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to sdram_a_pad_o[]

 set_location_assignment PIN_T7 -to sdram_a_pad_o[]

 set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to sdram_a_pad_o[]

 set_location_assignment PIN_N8 -to sdram_a_pad_o[]

 set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to sdram_a_pad_o[]

 set_location_assignment PIN_T6 -to sdram_a_pad_o[]

 set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to sdram_a_pad_o[]

 set_location_assignment PIN_R1 -to sdram_a_pad_o[]

 set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to sdram_a_pad_o[]

 set_location_assignment PIN_P1 -to sdram_a_pad_o[]

 set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to sdram_a_pad_o[]

 set_location_assignment PIN_N2 -to sdram_a_pad_o[]

 set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to sdram_a_pad_o[]

 set_location_assignment PIN_N1 -to sdram_a_pad_o[]

 set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to sdram_a_pad_o[]

 set_location_assignment PIN_L4 -to sdram_a_pad_o[]

 set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to sdram_a_pad_o[]

 set_location_assignment PIN_G2 -to sdram_dq_pad_io[]

 set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to sdram_dq_pad_io[]

 set_location_assignment PIN_G1 -to sdram_dq_pad_io[]

 set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to sdram_dq_pad_io[]

 set_location_assignment PIN_L8 -to sdram_dq_pad_io[]

 set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to sdram_dq_pad_io[]

 set_location_assignment PIN_K5 -to sdram_dq_pad_io[]

 set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to sdram_dq_pad_io[]

 set_location_assignment PIN_K2 -to sdram_dq_pad_io[]

 set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to sdram_dq_pad_io[]

 set_location_assignment PIN_J2 -to sdram_dq_pad_io[]

 set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to sdram_dq_pad_io[]

 set_location_assignment PIN_J1 -to sdram_dq_pad_io[]

 set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to sdram_dq_pad_io[]

 set_location_assignment PIN_R7 -to sdram_dq_pad_io[]

 set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to sdram_dq_pad_io[]

 set_location_assignment PIN_T4 -to sdram_dq_pad_io[]

 set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to sdram_dq_pad_io[]

 set_location_assignment PIN_T2 -to sdram_dq_pad_io[]

 set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to sdram_dq_pad_io[]

 set_location_assignment PIN_T3 -to sdram_dq_pad_io[]

 set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to sdram_dq_pad_io[]

 set_location_assignment PIN_R3 -to sdram_dq_pad_io[]

 set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to sdram_dq_pad_io[]

 set_location_assignment PIN_R5 -to sdram_dq_pad_io[]

 set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to sdram_dq_pad_io[]

 set_location_assignment PIN_P3 -to sdram_dq_pad_io[]

 set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to sdram_dq_pad_io[]

 set_location_assignment PIN_N3 -to sdram_dq_pad_io[]

 set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to sdram_dq_pad_io[]

 set_location_assignment PIN_K1 -to sdram_dq_pad_io[]

 set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to sdram_dq_pad_io[]

 set_location_assignment PIN_R6 -to sdram_dqm_pad_o[]

 set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to sdram_dqm_pad_o[]

 set_location_assignment PIN_T5 -to sdram_dqm_pad_o[]

 set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to sdram_dqm_pad_o[]

 set_location_assignment PIN_M7 -to sdram_ba_pad_o[]

 set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to sdram_ba_pad_o[]

 set_location_assignment PIN_M6 -to sdram_ba_pad_o[]

 set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to sdram_ba_pad_o[]

 set_location_assignment PIN_L1 -to sdram_cas_pad_o

 set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to sdram_cas_pad_o

 set_location_assignment PIN_L7 -to sdram_cke_pad_o

 set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to sdram_cke_pad_o

 set_location_assignment PIN_P6 -to sdram_cs_n_pad_o

 set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to sdram_cs_n_pad_o

 set_location_assignment PIN_L2 -to sdram_ras_pad_o

 set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to sdram_ras_pad_o

 set_location_assignment PIN_C2 -to sdram_we_pad_o

 set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to sdram_we_pad_o

 set_location_assignment PIN_R4 -to sdram_clk_pad_o

 set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to sdram_clk_pad_o

 #

 # GPIO0 (LEDs)

 #

 set_location_assignment PIN_A15 -to gpio0_io[]

 set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to gpio0_io[]

 set_location_assignment PIN_A13 -to gpio0_io[]

 set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to gpio0_io[]

 set_location_assignment PIN_B13 -to gpio0_io[]

 set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to gpio0_io[]

 set_location_assignment PIN_A11 -to gpio0_io[]

 set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to gpio0_io[]

 set_location_assignment PIN_D1 -to gpio0_io[]

 set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to gpio0_io[]

 set_location_assignment PIN_F3 -to gpio0_io[]

 set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to gpio0_io[]

 set_location_assignment PIN_B1 -to gpio0_io[]

 set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to gpio0_io[]

 set_location_assignment PIN_L3 -to gpio0_io[]

 set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to gpio0_io[]

 #============================================================

 # GPIO1 (Switches)

 #============================================================

 set_location_assignment PIN_M1  -to gpio1_i[]

 set_location_assignment PIN_T8  -to gpio1_i[]

 set_location_assignment PIN_B9  -to gpio1_i[]

 set_location_assignment PIN_M15 -to gpio1_i[]

 set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to gpio1_i[*]