正文

HyperLedger Fabric 1.4 多机多节点部署（10.3）

IP云
IP云V管理员/2 阅读
11/25
提示：扫一扫查出行
【扫一扫了解最新限行尾号】
复制提示

网易云课堂视频在线教学，地址：https://study.163.com/course/introduction/1209401942.htm

多机多节点指在多台电脑上部署多个组织和节点，本案例部署一个排序（orderer）服务，两个组织（org1，org2）和四个节点（peer）,每个组织包括两个节点，需要五台计算机，计算机配置如下：

多机多节点部署结构图如下：

图：多机多节点部署结构图

多机多节点部署（1个orderer+4个peer）步骤如下：
10.3.1 部署orderer.example.com
1. 创建multipeer目录 

# cd $GOPATH/src/github.com/hyperledger/fabric

# mkdir multipeer

# cd multipeer

2. 获取生成工具

把下载的hyperledger-fabric-linux-amd64-1.2.0.tar.gz二进制文件包解压，把其中的bin目录拷贝到multipeer目录下。 

# chmod -R  ./bin

3. 准备生成证书和区块配置文件

配置crypto-config.yaml和configtx.yaml文件，拷贝到multipeer目录下。

  • crypto-config.yaml： 
# Copyright IBM Corp. All Rights Reserved.

#

# SPDX-License-Identifier: Apache-2.0

#

# ---------------------------------------------------------------------------

# "OrdererOrgs" - Definition of organizations managing orderer nodes

# ---------------------------------------------------------------------------

OrdererOrgs:

  # ---------------------------------------------------------------------------

  # Orderer

  # ---------------------------------------------------------------------------

  - Name: Orderer

    Domain: example.com

    CA:

        Country: US

        Province: California

        Locality: San Francisco

    # ---------------------------------------------------------------------------

    # "Specs" - See PeerOrgs below for complete description

    # ---------------------------------------------------------------------------

    Specs:

      - Hostname: orderer

# ---------------------------------------------------------------------------

# "PeerOrgs" - Definition of organizations managing peer nodes

# ---------------------------------------------------------------------------

PeerOrgs:

  # ---------------------------------------------------------------------------

  # Org1

  # ---------------------------------------------------------------------------

  - Name: Org1

    Domain: org1.example.com

    EnableNodeOUs: true

    CA:

        Country: US

        Province: California

        Locality: San Francisco

    # ---------------------------------------------------------------------------

    # "Specs"

    # ---------------------------------------------------------------------------

    # Uncomment this section to enable the explicit definition of hosts in your

    # configuration.  Most users will want to use Template, below

    #

    # Specs is an array of Spec entries.  Each Spec entry consists of two fields:

    #   - Hostname:   (Required) The desired hostname, sans the domain.

    #   - CommonName: (Optional) Specifies the template or explicit override for

    #                 the CN.  By default, this is the template:

    #

    #                              "{{.Hostname}}.{{.Domain}}"

    #

    #                 which obtains its values from the Spec.Hostname and

    #                 Org.Domain, respectively.

    # ---------------------------------------------------------------------------

    # Specs:

    #   - Hostname: foo # implicitly "foo.org1.example.com"

    #     CommonName: foo27.org5.example.com # overrides Hostname-based FQDN set above

    #   - Hostname: bar

    #   - Hostname: baz

    # ---------------------------------------------------------------------------

    # "Template"

    # ---------------------------------------------------------------------------

    # Allows for the definition of  or more hosts that are created sequentially

    # from a template. By default, this looks like "peer%d" from  to Count-.

    # You may override the number of nodes (Count), the starting index (Start)

    # or the template used to construct the name (Hostname).

    #

    # Note: Template and Specs are not mutually exclusive.  You may define both

    # sections and the aggregate nodes will be created for you.  Take care with

    # name collisions

    # ---------------------------------------------------------------------------

    Template:

      Count:

      # Start:

      # Hostname: {{.Prefix}}{{.Index}} # default

    # ---------------------------------------------------------------------------

    # "Users"

    # ---------------------------------------------------------------------------

    # Count: The number of user accounts _in addition_ to Admin

    # ---------------------------------------------------------------------------

    Users:

      Count:

  # ---------------------------------------------------------------------------

  # Org2: See "Org1" for full specification

  # ---------------------------------------------------------------------------

  - Name: Org2

    Domain: org2.example.com

    EnableNodeOUs: true

    CA:

        Country: US

        Province: California

        Locality: San Francisco

    Template:

      Count:

    Users:

      Count:
  • configtx.yaml： 
# Copyright IBM Corp. All Rights Reserved.

#

# SPDX-License-Identifier: Apache-2.0

#

---

################################################################################

#

#   Section: Organizations

#

#   - This section defines the different organizational identities which will

#   be referenced later in the configuration.

#

################################################################################

Organizations:

    # SampleOrg defines an MSP using the sampleconfig.  It should never be used

    # in production but may be used as a template for other definitions

    - &OrdererOrg

        # DefaultOrg defines the organization which is used in the sampleconfig

        # of the fabric.git development environment

        Name: OrdererOrg

        # ID to load the MSP definition as

        ID: OrdererMSP

        # MSPDir is the filesystem path which contains the MSP configuration

        MSPDir: crypto-config/ordererOrganizations/example.com/msp

        # Policies defines the set of policies at this level of the config tree

        # For organization policies, their canonical path is usually

        #   /Channel/<Application|Orderer>/<OrgName>/<PolicyName>

        Policies:

            Readers:

                Type: Signature

                Rule: "OR('OrdererMSP.member')"

            Writers:

                Type: Signature

                Rule: "OR('OrdererMSP.member')"

            Admins:

                Type: Signature

                Rule: "OR('OrdererMSP.admin')"

    - &Org1

        # DefaultOrg defines the organization which is used in the sampleconfig

        # of the fabric.git development environment

        Name: Org1MSP

        # ID to load the MSP definition as

        ID: Org1MSP

        MSPDir: crypto-config/peerOrganizations/org1.example.com/msp

        # Policies defines the set of policies at this level of the config tree

        # For organization policies, their canonical path is usually

        #   /Channel/<Application|Orderer>/<OrgName>/<PolicyName>

        Policies:

            Readers:

                Type: Signature

                Rule: "OR('Org1MSP.admin', 'Org1MSP.peer', 'Org1MSP.client')"

            Writers:

                Type: Signature

                Rule: "OR('Org1MSP.admin', 'Org1MSP.client')"

            Admins:

                Type: Signature

                Rule: "OR('Org1MSP.admin')"

        AnchorPeers:

            # AnchorPeers defines the location of peers which can be used

            # for cross org gossip communication.  Note, this value is only

            # encoded in the genesis block in the Application section context

            - Host: peer0.org1.example.com

              Port: 

    - &Org2

        # DefaultOrg defines the organization which is used in the sampleconfig

        # of the fabric.git development environment

        Name: Org2MSP

        # ID to load the MSP definition as

        ID: Org2MSP

        MSPDir: crypto-config/peerOrganizations/org2.example.com/msp

        # Policies defines the set of policies at this level of the config tree

        # For organization policies, their canonical path is usually

        #   /Channel/<Application|Orderer>/<OrgName>/<PolicyName>

        Policies:

            Readers:

                Type: Signature

                Rule: "OR('Org2MSP.admin', 'Org2MSP.peer', 'Org2MSP.client')"

            Writers:

                Type: Signature

                Rule: "OR('Org2MSP.admin', 'Org2MSP.client')"

            Admins:

                Type: Signature

                Rule: "OR('Org2MSP.admin')"

        AnchorPeers:

            # AnchorPeers defines the location of peers which can be used

            # for cross org gossip communication.  Note, this value is only

            # encoded in the genesis block in the Application section context

            - Host: peer0.org2.example.com

              Port: 

################################################################################

#

#   SECTION: Capabilities

#

#   - This section defines the capabilities of fabric network. This is a new

#   concept as of v1.1.0 and should not be utilized in mixed networks with

#   v1..x peers and orderers.  Capabilities define features which must be

#   present in a fabric binary for that binary to safely participate in the

#   fabric network.  For instance, if a new MSP type is added, newer binaries

#   might recognize and validate the signatures from this type, while older

#   binaries without this support would be unable to validate those

#   transactions.  This could lead to different versions of the fabric binaries

#   having different world states.  Instead, defining a capability for a channel

#   informs those binaries without this capability that they must cease

#   processing transactions until they have been upgraded.  For v1..x if any

#   capabilities are defined (including a map with all capabilities turned off)

#   then the v1..x peer will deliberately crash.

#

################################################################################

Capabilities:

    # Channel capabilities apply to both the orderers and the peers and must be

    # supported by both.  Set the value of the capability to true to require it.

    Global: &ChannelCapabilities

        # V1. for Global is a catchall flag for behavior which has been

        # determined to be desired for all orderers and peers running v1..x,

        # but the modification of which would cause incompatibilities.  Users

        # should leave this flag set to true.

        V1_1: true

    # Orderer capabilities apply only to the orderers, and may be safely

    # manipulated without concern for upgrading peers.  Set the value of the

    # capability to true to require it.

    Orderer: &OrdererCapabilities

        # V1. for Order is a catchall flag for behavior which has been

        # determined to be desired for all orderers running v1..x, but the

        # modification of which  would cause incompatibilities.  Users should

        # leave this flag set to true.

        V1_1: true

    # Application capabilities apply only to the peer network, and may be safely

    # manipulated without concern for upgrading orderers.  Set the value of the

    # capability to true to require it.

    Application: &ApplicationCapabilities

        # V1. for Application is a catchall flag for behavior which has been

        # determined to be desired for all peers running v1..x, but the

        # modification of which would cause incompatibilities.  Users should

        # leave this flag set to true.

        V1_2: true

################################################################################

#

#   SECTION: Application

#

#   - This section defines the values to encode into a config transaction or

#   genesis block for application related parameters

#

################################################################################

Application: &ApplicationDefaults

    # Organizations is the list of orgs which are defined as participants on

    # the application side of the network

    Organizations:

    # Policies defines the set of policies at this level of the config tree

    # For Application policies, their canonical path is

    #   /Channel/Application/<PolicyName>

    Policies:

        Readers:

            Type: ImplicitMeta

            Rule: "ANY Readers"

        Writers:

            Type: ImplicitMeta

            Rule: "ANY Writers"

        Admins:

            Type: ImplicitMeta

            Rule: "MAJORITY Admins"

    # Capabilities describes the application level capabilities, see the

    # dedicated Capabilities section elsewhere in this file for a full

    # description

    Capabilities:

        <<: *ApplicationCapabilities

################################################################################

#

#   SECTION: Orderer

#

#   - This section defines the values to encode into a config transaction or

#   genesis block for orderer related parameters

#

################################################################################

Orderer: &OrdererDefaults

    # Orderer Type: The orderer implementation to start

    # Available types are "solo" and "kafka"

    OrdererType: solo

    Addresses:

        - orderer.example.com:

    # Batch Timeout: The amount of time to wait before creating a batch

    BatchTimeout: 2s

    # Batch Size: Controls the number of messages batched into a block

    BatchSize:

        # Max Message Count: The maximum number of messages to permit in a batch

        MaxMessageCount: 

        # Absolute Max Bytes: The absolute maximum number of bytes allowed for

        # the serialized messages in a batch.

        AbsoluteMaxBytes:  MB

        # Preferred Max Bytes: The preferred maximum number of bytes allowed for

        # the serialized messages in a batch. A message larger than the preferred

        # max bytes will result in a batch larger than preferred max bytes.

        PreferredMaxBytes:  KB

    Kafka:

        # Brokers: A list of Kafka brokers to which the orderer connects. Edit

        # this list to identify the brokers of the ordering service.

        # NOTE: Use IP:port notation.

        Brokers:

            - 127.0.0.1:

    # Organizations is the list of orgs which are defined as participants on

    # the orderer side of the network

    Organizations:

    # Policies defines the set of policies at this level of the config tree

    # For Orderer policies, their canonical path is

    #   /Channel/Orderer/<PolicyName>

    Policies:

        Readers:

            Type: ImplicitMeta

            Rule: "ANY Readers"

        Writers:

            Type: ImplicitMeta

            Rule: "ANY Writers"

        Admins:

            Type: ImplicitMeta

            Rule: "MAJORITY Admins"

        # BlockValidation specifies what signatures must be included in the block

        # from the orderer for the peer to validate it.

        BlockValidation:

            Type: ImplicitMeta

            Rule: "ANY Writers"

    # Capabilities describes the orderer level capabilities, see the

    # dedicated Capabilities section elsewhere in this file for a full

    # description

    Capabilities:

        <<: *OrdererCapabilities

################################################################################

#

#   CHANNEL

#

#   This section defines the values to encode into a config transaction or

#   genesis block for channel related parameters.

#

################################################################################

Channel: &ChannelDefaults

    # Policies defines the set of policies at this level of the config tree

    # For Channel policies, their canonical path is

    #   /Channel/<PolicyName>

    Policies:

        # Who may invoke the 'Deliver' API

        Readers:

            Type: ImplicitMeta

            Rule: "ANY Readers"

        # Who may invoke the 'Broadcast' API

        Writers:

            Type: ImplicitMeta

            Rule: "ANY Writers"

        # By default, who may modify elements at this config level

        Admins:

            Type: ImplicitMeta

            Rule: "MAJORITY Admins"

    # Capabilities describes the channel level capabilities, see the

    # dedicated Capabilities section elsewhere in this file for a full

    # description

    Capabilities:

        <<: *ChannelCapabilities

################################################################################

#

#   Profile

#

#   - Different configuration profiles may be encoded here to be specified

#   as parameters to the configtxgen tool

#

################################################################################

Profiles:

    TwoOrgsOrdererGenesis:

        <<: *ChannelDefaults

        Orderer:

            <<: *OrdererDefaults

            Organizations:

                - *OrdererOrg

        Consortiums:

            SampleConsortium:

                Organizations:

                    - *Org1

                    - *Org2

    TwoOrgsChannel:

        Consortium: SampleConsortium

        Application:

            <<: *ApplicationDefaults

            Organizations:

                - *Org1

                - *Org2

5. 生成公私钥和证书 

# ./bin/cryptogen generate --config=./crypto-config.yaml

6. 生成创世区块 

# mkdir channel-artifacts

# ./bin/configtxgen -profile TwoOrgsOrdererGenesis -outputBlock ./channel-artifacts/genesis.block

7. 生成通道配置区块 

# ./bin/configtxgen -profile TwoOrgsChannel -outputCreateChannelTx ./channel-artifacts/mychannel.tx -channelID mychannel

8. 拷贝生成文件到其它电脑 

# cd ..

# scp -r multipeer root@192.168.235.101:/opt/gopath/src/github.com/hyperledger/fabric

# scp -r multipeer root@192.168.235.102:/opt/gopath/src/github.com/hyperledger/fabric

# scp -r multipeer root@192.168.235.103:/opt/gopath/src/github.com/hyperledger/fabric

# scp -r multipeer root@192.168.235.104:/opt/gopath/src/github.com/hyperledger/fabric

9. 准备docker配置文件
配置docker-compose-orderer.yaml文件，拷贝到multipeer目录下。
docker-compose-orderer.yaml： 

# Copyright IBM Corp. All Rights Reserved.

#

# SPDX-License-Identifier: Apache-2.0

#

version: ''

services:

  orderer.example.com:

    container_name: orderer.example.com

    image: hyperledger/fabric-orderer

    environment:

      - ORDERER_GENERAL_LOGLEVEL=debug

      - ORDERER_GENERAL_LISTENADDRESS=0.0.0.0

      - ORDERER_GENERAL_GENESISMETHOD=file

      - ORDERER_GENERAL_GENESISFILE=/var/hyperledger/orderer/orderer.genesis.block

      - ORDERER_GENERAL_LOCALMSPID=OrdererMSP

      - ORDERER_GENERAL_LOCALMSPDIR=/var/hyperledger/orderer/msp

      # enabled TLS

      - ORDERER_GENERAL_TLS_ENABLED=true

      - ORDERER_GENERAL_TLS_PRIVATEKEY=/var/hyperledger/orderer/tls/server.key

      - ORDERER_GENERAL_TLS_CERTIFICATE=/var/hyperledger/orderer/tls/server.crt

      - ORDERER_GENERAL_TLS_ROOTCAS=[/var/hyperledger/orderer/tls/ca.crt]

      - ORDERER_KAFKA_RETRY_SHORTINTERVAL=1s

      - ORDERER_KAFKA_RETRY_SHORTTOTAL=30s

      - ORDERER_KAFKA_VERBOSE=true

    working_dir: /opt/gopath/src/github.com/hyperledger/fabric

    command: orderer

    volumes:

      - ./channel-artifacts/genesis.block:/var/hyperledger/orderer/orderer.genesis.block

      - ./crypto-config/ordererOrganizations/example.com/orderers/orderer.example.com/msp:/var/hyperledger/orderer/msp

      - ./crypto-config/ordererOrganizations/example.com/orderers/orderer.example.com/tls/:/var/hyperledger/orderer/tls

    ports:

      - :

10. 启动Fabric网络 

# docker-compose -f docker-compose-orderer.yaml up -d

10.3.2 部署peer0.org1.example.com
1. 准备docker配置文件
配置docker-compose-peer.yaml文件，拷贝到multipeer目录下。
docker-compose-peer.yaml： 

# Copyright IBM Corp. All Rights Reserved.

#

# SPDX-License-Identifier: Apache-2.0

#

version: ''

services:

  peer0.org1.example.com:

    container_name: peer0.org1.example.com

    image: hyperledger/fabric-peer

    environment:

      - CORE_PEER_ID=peer0.org1.example.com

      - CORE_PEER_ADDRESS=peer0.org1.example.com:

      - CORE_PEER_CHAINCODEADDRESS=peer0.org1.example.com:

      - CORE_PEER_CHAINCODELISTENADDRESS=0.0.0.0:

      - CORE_PEER_GOSSIP_EXTERNALENDPOINT=peer0.org1.example.com:

      - CORE_PEER_LOCALMSPID=Org1MSP

      - CORE_VM_ENDPOINT=unix:///host/var/run/docker.sock

      # the following setting starts chaincode containers on the same

      # bridge network as the peers

      # https://docs.docker.com/compose/networking/

      - CORE_VM_DOCKER_HOSTCONFIG_NETWORKMODE=multipeer_default

      #- CORE_LOGGING_LEVEL=ERROR

      - CORE_LOGGING_LEVEL=DEBUG

      - CORE_PEER_TLS_ENABLED=true

      - CORE_PEER_GOSSIP_USELEADERELECTION=true

      - CORE_PEER_GOSSIP_ORGLEADER=false

      - CORE_PEER_PROFILE_ENABLED=true

      - CORE_PEER_TLS_CERT_FILE=/etc/hyperledger/fabric/tls/server.crt

      - CORE_PEER_TLS_KEY_FILE=/etc/hyperledger/fabric/tls/server.key

      - CORE_PEER_TLS_ROOTCERT_FILE=/etc/hyperledger/fabric/tls/ca.crt

    working_dir: /opt/gopath/src/github.com/hyperledger/fabric/peer

    command: peer node start

    volumes:

        - /var/run/:/host/var/run/

        - ./crypto-config/peerOrganizations/org1.example.com/peers/peer0.org1.example.com/msp:/etc/hyperledger/fabric/msp

        - ./crypto-config/peerOrganizations/org1.example.com/peers/peer0.org1.example.com/tls:/etc/hyperledger/fabric/tls

    ports:

      - :

      - :

      - :

    extra_hosts:

      - "orderer.example.com:192.168.235.100"

  cli:

    container_name: cli

    image: hyperledger/fabric-tools

    tty: true

    environment:

      - GOPATH=/opt/gopath

      - CORE_VM_ENDPOINT=unix:///host/var/run/docker.sock

      - CORE_LOGGING_LEVEL=DEBUG

      - CORE_PEER_ID=cli

      - CORE_PEER_ADDRESS=peer0.org1.example.com:

      - CORE_PEER_LOCALMSPID=Org1MSP

      - CORE_PEER_TLS_ENABLED=true

      - CORE_PEER_TLS_CERT_FILE=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org1.example.com/peers/peer0.org1.example.com/tls/server.crt

      - CORE_PEER_TLS_KEY_FILE=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org1.example.com/peers/peer0.org1.example.com/tls/server.key

      - CORE_PEER_TLS_ROOTCERT_FILE=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org1.example.com/peers/peer0.org1.example.com/tls/ca.crt

      - CORE_PEER_MSPCONFIGPATH=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org1.example.com/users/Admin@org1.example.com/msp

    working_dir: /opt/gopath/src/github.com/hyperledger/fabric/peer

    volumes:

        - /var/run/:/host/var/run/

        - ./chaincode/go/:/opt/gopath/src/github.com/hyperledger/fabric/multipeer/chaincode/go

        - ./crypto-config:/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/

        - ./channel-artifacts:/opt/gopath/src/github.com/hyperledger/fabric/peer/channel-artifacts

    depends_on:

       - peer0.org1.example.com

    extra_hosts:

       - "orderer.example.com:192.168.235.100"

       - "peer0.org1.example.com:192.168.235.101"

       - "peer1.org1.example.com:192.168.235.102"

       - "peer0.org2.example.com:192.168.235.103"

       - "peer1.org2.example.com:192.168.235.104"

2. 准备部署智能合约
拷贝examples/chaincode/go/example02目录下的文件到multipeer/chaincode/go/example02目录下。
3. 启动Fabric网络
1) 启动peer 

# cd $GOPATH/src/github.com/hyperledger/fabric/multipeer

# docker-compose -f docker-compose-peer.yaml up -d

2) 启动cli容器 

# docker exec -it cli bash

3) 创建Channel 

# ORDERER_CA=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/ordererOrganizations/example.com/orderers/orderer.example.com/msp/tlscacerts/tlsca.example.com-cert.pem

# peer channel create -o orderer.example.com: -c mychannel -f ./channel-artifacts/mychannel.tx --tls --cafile $ORDERER_CA

4) Peer加入Channel 

# peer channel join -b mychannel.block

5) 保存mychannel.block
命令的xxxxxxxx替换为图中红框中的字符。


图：cli客户端 

# exit

# docker cp xxxxxxxx:/opt/gopath/src/github.com/hyperledger/fabric/peer/mychannel.block /opt/gopath/src/github.com/hyperledger/fabric/multipeer

6) mychannel.block拷贝到org1的peer1电脑 

# scp mychannel.block root@192.168.235.102:/opt/gopath/src/github.com/hyperledger/fabric/multipeer

# scp mychannel.block root@192.168.235.103:/opt/gopath/src/github.com/hyperledger/fabric/multipeer

# scp mychannel.block root@192.168.235.104:/opt/gopath/src/github.com/hyperledger/fabric/multipeer

4. 安装与运行智能合约
1） 安装智能合约 

# docker exec -it cli bash

# peer chaincode install -n mycc -p github.com/hyperledger/fabric/multipeer/chaincode/go/example02/cmd/ -v 1.0

2） 实例化智能合约
区块初始化数据为a为100，b为200。 

# ORDERER_CA=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/ordererOrganizations/example.com/orderers/orderer.example.com/msp/tlscacerts/tlsca.example.com-cert.pem

# peer chaincode instantiate -o orderer.example.com: --tls --cafile $ORDERER_CA -C mychannel -n mycc -v 1.0 -c '{"Args":["init","a","100","b","200"]}' -P "OR ('Org1MSP.peer','Org2MSP.peer')"

3） Peer上查询a，显示100 

# peer chaincode query -C mychannel -n mycc -c '{"Args":["query","a"]}'

查询a成功结果如下图所示：


图：查询a成功结果

4） Peer上进行a向b转10交易 

# peer chaincode invoke --tls --cafile $ORDERER_CA -C mychannel -n mycc -c '{"Args":["invoke","a","b","10"]}'

交易成功结果如下图所示：


图：交易成功结果

5） Peer上查询a，显示210 

# peer chaincode query -C mychannel -n mycc -c '{"Args":["query","b"]}'

查询b成功结果如下图所示：

10.3.3 部署peer1.org1.example.com
1 准备docker配置文件
配置docker-compose-peer.yaml文件，拷贝到multipeer目录下。
docker-compose-peer.yaml： 

# Copyright IBM Corp. All Rights Reserved.

#

# SPDX-License-Identifier: Apache-2.0

#

version: ''

services:

  peer1.org1.example.com:

    container_name: peer1.org1.example.com

    image: hyperledger/fabric-peer

    environment:

      - CORE_PEER_ID=peer1.org1.example.com

      - CORE_PEER_ADDRESS=peer1.org1.example.com:

      - CORE_PEER_CHAINCODEADDRESS=peer1.org1.example.com:

      - CORE_PEER_CHAINCODELISTENADDRESS=0.0.0.0:

      - CORE_PEER_GOSSIP_EXTERNALENDPOINT=peer1.org1.example.com:

      - CORE_PEER_LOCALMSPID=Org1MSP

      - CORE_VM_ENDPOINT=unix:///host/var/run/docker.sock

      # the following setting starts chaincode containers on the same

      # bridge network as the peers

      # https://docs.docker.com/compose/networking/

      - CORE_VM_DOCKER_HOSTCONFIG_NETWORKMODE=multipeer_default

      #- CORE_LOGGING_LEVEL=ERROR

      - CORE_LOGGING_LEVEL=DEBUG

      - CORE_PEER_TLS_ENABLED=true

      - CORE_PEER_GOSSIP_USELEADERELECTION=true

      - CORE_PEER_GOSSIP_ORGLEADER=false

      - CORE_PEER_PROFILE_ENABLED=true

      - CORE_PEER_TLS_CERT_FILE=/etc/hyperledger/fabric/tls/server.crt

      - CORE_PEER_TLS_KEY_FILE=/etc/hyperledger/fabric/tls/server.key

      - CORE_PEER_TLS_ROOTCERT_FILE=/etc/hyperledger/fabric/tls/ca.crt

    working_dir: /opt/gopath/src/github.com/hyperledger/fabric/peer

    command: peer node start

    volumes:

        - /var/run/:/host/var/run/

        - ./crypto-config/peerOrganizations/org1.example.com/peers/peer1.org1.example.com/msp:/etc/hyperledger/fabric/msp

        - ./crypto-config/peerOrganizations/org1.example.com/peers/peer1.org1.example.com/tls:/etc/hyperledger/fabric/tls

    ports:

      - :

      - :

      - :

    extra_hosts:

      - "orderer.example.com:192.168.235.100"

  cli:

    container_name: cli

    image: hyperledger/fabric-tools

    tty: true

    environment:

      - GOPATH=/opt/gopath

      - CORE_VM_ENDPOINT=unix:///host/var/run/docker.sock

      - CORE_LOGGING_LEVEL=DEBUG

      - CORE_PEER_ID=cli

      - CORE_PEER_ADDRESS=peer1.org1.example.com:

      - CORE_PEER_LOCALMSPID=Org1MSP

      - CORE_PEER_TLS_ENABLED=true

      - CORE_PEER_TLS_CERT_FILE=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org1.example.com/peers/peer1.org1.example.com/tls/server.crt

      - CORE_PEER_TLS_KEY_FILE=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org1.example.com/peers/peer1.org1.example.com/tls/server.key

      - CORE_PEER_TLS_ROOTCERT_FILE=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org1.example.com/peers/peer1.org1.example.com/tls/ca.crt

      - CORE_PEER_MSPCONFIGPATH=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org1.example.com/users/Admin@org1.example.com/msp

    working_dir: /opt/gopath/src/github.com/hyperledger/fabric/peer

    volumes:

        - /var/run/:/host/var/run/

        - ./chaincode/go/:/opt/gopath/src/github.com/hyperledger/fabric/multipeer/chaincode/go

        - ./crypto-config:/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/

        - ./channel-artifacts:/opt/gopath/src/github.com/hyperledger/fabric/peer/channel-artifacts

    depends_on:

       - peer1.org1.example.com

    extra_hosts:

       - "orderer.example.com:192.168.235.100"

       - "peer0.org1.example.com:192.168.235.101"

       - "peer1.org1.example.com:192.168.235.102"

       - "peer0.org2.example.com:192.168.235.103"

       - "peer1.org2.example.com:192.168.235.104"

2 准备部署智能合约
拷贝examples/chaincode/go/example02目录下的文件到multipeer/chaincode/go/example02目录下。
3 启动Fabric网络
1) 启动peer 

# cd $GOPATH/src/github.com/hyperledger/fabric/multipeer

# docker-compose -f docker-compose-peer.yaml up -d

2) 启动cli容器 

# docker exec -it cli bash

3) 拷贝mychannel.block到peer中
命令的xxxxxxxx替换为图中红框中的字符。


图：cli客户端 

# exit

# docker cp /opt/gopath/src/github.com/hyperledger/fabric/multipeer/mychannel.block xxxxxxxx:/opt/gopath/src/github.com/hyperledger/fabric/peer/

4) Peer加入Channel 

# docker exec -it cli bash

# peer channel join -b mychannel.block

4 安装与运行智能合约
1） 安装智能合约 

# peer chaincode install -n mycc -p github.com/hyperledger/fabric/multipeer/chaincode/go/example02/cmd/ -v 1.0

2） Peer上查询a，显示90 

# peer chaincode query -C mychannel -n mycc -c '{"Args":["query","a"]}'

查询a成功结果如下图所示：


图：查询a成功结果

3） Peer上进行a向b转10交易 

# ORDERER_CA=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/ordererOrganizations/example.com/orderers/orderer.example.com/msp/tlscacerts/tlsca.example.com-cert.pem

# peer chaincode invoke --tls --cafile $ORDERER_CA -C mychannel -n mycc -c '{"Args":["invoke","a","b","10"]}'

交易成功结果如下图所示：


图：交易成功结果

4） Peer上查询b，显示220 

# peer chaincode query -C mychannel -n mycc -c '{"Args":["query","b"]}'

查询b成功结果如下图所示：

10.3.4 部署peer0.org2.example.com
1 准备docker配置文件
配置docker-compose-peer.yaml文件，拷贝到multipeer目录下。
docker-compose-peer.yaml： 

# Copyright IBM Corp. All Rights Reserved.

#

# SPDX-License-Identifier: Apache-2.0

#

version: ''

services:

  peer0.org2.example.com:

    container_name: peer0.org2.example.com

    image: hyperledger/fabric-peer

    environment:

      - CORE_PEER_ID=peer0.org2.example.com

      - CORE_PEER_ADDRESS=peer0.org2.example.com:

      - CORE_PEER_CHAINCODEADDRESS=peer0.org2.example.com:

      - CORE_PEER_CHAINCODELISTENADDRESS=0.0.0.0:

      - CORE_PEER_GOSSIP_EXTERNALENDPOINT=peer0.org2.example.com:

      - CORE_PEER_LOCALMSPID=Org2MSP

      - CORE_VM_ENDPOINT=unix:///host/var/run/docker.sock

      # the following setting starts chaincode containers on the same

      # bridge network as the peers

      # https://docs.docker.com/compose/networking/

      - CORE_VM_DOCKER_HOSTCONFIG_NETWORKMODE=multipeer_default

      #- CORE_LOGGING_LEVEL=ERROR

      - CORE_LOGGING_LEVEL=DEBUG

      - CORE_PEER_TLS_ENABLED=true

      - CORE_PEER_GOSSIP_USELEADERELECTION=true

      - CORE_PEER_GOSSIP_ORGLEADER=false

      - CORE_PEER_PROFILE_ENABLED=true

      - CORE_PEER_TLS_CERT_FILE=/etc/hyperledger/fabric/tls/server.crt

      - CORE_PEER_TLS_KEY_FILE=/etc/hyperledger/fabric/tls/server.key

      - CORE_PEER_TLS_ROOTCERT_FILE=/etc/hyperledger/fabric/tls/ca.crt

    working_dir: /opt/gopath/src/github.com/hyperledger/fabric/peer

    command: peer node start

    volumes:

        - /var/run/:/host/var/run/

        - ./crypto-config/peerOrganizations/org2.example.com/peers/peer0.org2.example.com/msp:/etc/hyperledger/fabric/msp

        - ./crypto-config/peerOrganizations/org2.example.com/peers/peer0.org2.example.com/tls:/etc/hyperledger/fabric/tls

    ports:

      - :

      - :

      - :

    extra_hosts:

      - "orderer.example.com:192.168.235.100"

  cli:

    container_name: cli

    image: hyperledger/fabric-tools

    tty: true

    environment:

      - GOPATH=/opt/gopath

      - CORE_VM_ENDPOINT=unix:///host/var/run/docker.sock

      - CORE_LOGGING_LEVEL=DEBUG

      - CORE_PEER_ID=cli

      - CORE_PEER_ADDRESS=peer0.org2.example.com:

      - CORE_PEER_LOCALMSPID=Org2MSP

      - CORE_PEER_TLS_ENABLED=true

      - CORE_PEER_TLS_CERT_FILE=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org2.example.com/peers/peer0.org2.example.com/tls/server.crt

      - CORE_PEER_TLS_KEY_FILE=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org2.example.com/peers/peer0.org2.example.com/tls/server.key

      - CORE_PEER_TLS_ROOTCERT_FILE=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org2.example.com/peers/peer0.org2.example.com/tls/ca.crt

      - CORE_PEER_MSPCONFIGPATH=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org2.example.com/users/Admin@org2.example.com/msp

    working_dir: /opt/gopath/src/github.com/hyperledger/fabric/peer

    volumes:

        - /var/run/:/host/var/run/

        - ./chaincode/go/:/opt/gopath/src/github.com/hyperledger/fabric/multipeer/chaincode/go

        - ./crypto-config:/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/

        - ./channel-artifacts:/opt/gopath/src/github.com/hyperledger/fabric/peer/channel-artifacts

    depends_on:

       - peer0.org2.example.com

    extra_hosts:

       - "orderer.example.com:192.168.235.100"

       - "peer0.org1.example.com:192.168.235.101"

       - "peer1.org1.example.com:192.168.235.102"

       - "peer0.org2.example.com:192.168.235.103"

       - "peer1.org2.example.com:192.168.235.104"

2 准备部署智能合约
拷贝examples/chaincode/go/example02目录下的文件到multipeer/chaincode/go/example02目录下。
3 启动Fabric网络
1) 启动peer 

# cd $GOPATH/src/github.com/hyperledger/fabric/multipeer

# docker-compose -f docker-compose-peer.yaml up -d

2) 启动cli容器 

# docker exec -it cli bash

3) 拷贝mychannel.block到peer中
命令的xxxxxxxx替换为图中红框中的字符。


图：cli客户端 

# exit

# docker cp /opt/gopath/src/github.com/hyperledger/fabric/multipeer/mychannel.block xxxxxxxx:/opt/gopath/src/github.com/hyperledger/fabric/peer/

4) Peer加入Channel 

# docker exec -it cli bash

# peer channel join -b mychannel.block

4 安装与运行智能合约
1） 安装智能合约 

# peer chaincode install -n mycc -p github.com/hyperledger/fabric/multipeer/chaincode/go/example02/cmd/ -v 1.0

2） Peer上查询a，显示80 

# peer chaincode query -C mychannel -n mycc -c '{"Args":["query","a"]}'

查询a成功结果如下图所示：


图：查询a成功结果

3） Peer上进行a向b转20交易 

# ORDERER_CA=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/ordererOrganizations/example.com/orderers/orderer.example.com/msp/tlscacerts/tlsca.example.com-cert.pem

# peer chaincode invoke --tls --cafile $ORDERER_CA -C mychannel -n mycc -c '{"Args":["invoke","a","b","20"]}'

交易成功结果如下图所示：


图：交易成功结果

4） Peer上查询b，显示240 

# peer chaincode query -C mychannel -n mycc -c '{"Args":["query","b"]}'

查询b成功结果如下图所示：

10.3.5 部署peer1.org2.example.com
1 准备docker配置文件
配置docker-compose-peer.yaml文件，拷贝到multipeer目录下。
docker-compose-peer.yaml： 

# Copyright IBM Corp. All Rights Reserved.

#

# SPDX-License-Identifier: Apache-2.0

#

version: ''

services:

  peer1.org2.example.com:

    container_name: peer1.org2.example.com

    image: hyperledger/fabric-peer

    environment:

      - CORE_PEER_ID=peer1.org2.example.com

      - CORE_PEER_ADDRESS=peer1.org2.example.com:

      - CORE_PEER_CHAINCODEADDRESS=peer1.org2.example.com:

      - CORE_PEER_CHAINCODELISTENADDRESS=0.0.0.0:

      - CORE_PEER_GOSSIP_EXTERNALENDPOINT=peer1.org2.example.com:

      - CORE_PEER_LOCALMSPID=Org2MSP

      - CORE_VM_ENDPOINT=unix:///host/var/run/docker.sock

      # the following setting starts chaincode containers on the same

      # bridge network as the peers

      # https://docs.docker.com/compose/networking/

      - CORE_VM_DOCKER_HOSTCONFIG_NETWORKMODE=multipeer_default

      #- CORE_LOGGING_LEVEL=ERROR

      - CORE_LOGGING_LEVEL=DEBUG

      - CORE_PEER_TLS_ENABLED=true

      - CORE_PEER_GOSSIP_USELEADERELECTION=true

      - CORE_PEER_GOSSIP_ORGLEADER=false

      - CORE_PEER_PROFILE_ENABLED=true

      - CORE_PEER_TLS_CERT_FILE=/etc/hyperledger/fabric/tls/server.crt

      - CORE_PEER_TLS_KEY_FILE=/etc/hyperledger/fabric/tls/server.key

      - CORE_PEER_TLS_ROOTCERT_FILE=/etc/hyperledger/fabric/tls/ca.crt

    working_dir: /opt/gopath/src/github.com/hyperledger/fabric/peer

    command: peer node start

    volumes:

        - /var/run/:/host/var/run/

        - ./crypto-config/peerOrganizations/org2.example.com/peers/peer1.org2.example.com/msp:/etc/hyperledger/fabric/msp

        - ./crypto-config/peerOrganizations/org2.example.com/peers/peer1.org2.example.com/tls:/etc/hyperledger/fabric/tls

    ports:

      - :

      - :

      - :

    extra_hosts:

      - "orderer.example.com:192.168.235.100"

  cli:

    container_name: cli

    image: hyperledger/fabric-tools

    tty: true

    environment:

      - GOPATH=/opt/gopath

      - CORE_VM_ENDPOINT=unix:///host/var/run/docker.sock

      - CORE_LOGGING_LEVEL=DEBUG

      - CORE_PEER_ID=cli

      - CORE_PEER_ADDRESS=peer1.org2.example.com:

      - CORE_PEER_LOCALMSPID=Org2MSP

      - CORE_PEER_TLS_ENABLED=true

      - CORE_PEER_TLS_CERT_FILE=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org2.example.com/peers/peer1.org2.example.com/tls/server.crt

      - CORE_PEER_TLS_KEY_FILE=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org2.example.com/peers/peer1.org2.example.com/tls/server.key

      - CORE_PEER_TLS_ROOTCERT_FILE=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org2.example.com/peers/peer1.org2.example.com/tls/ca.crt

      - CORE_PEER_MSPCONFIGPATH=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org2.example.com/users/Admin@org2.example.com/msp

    working_dir: /opt/gopath/src/github.com/hyperledger/fabric/peer

    volumes:

        - /var/run/:/host/var/run/

        - ./chaincode/go/:/opt/gopath/src/github.com/hyperledger/fabric/multipeer/chaincode/go

        - ./crypto-config:/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/

        - ./channel-artifacts:/opt/gopath/src/github.com/hyperledger/fabric/peer/channel-artifacts

    depends_on:

       - peer1.org2.example.com

    extra_hosts:

       - "orderer.example.com:192.168.235.100"

       - "peer0.org1.example.com:192.168.235.101"

       - "peer1.org1.example.com:192.168.235.102"

       - "peer0.org2.example.com:192.168.235.103"

       - "peer1.org2.example.com:192.168.235.104"

2 准备部署智能合约
拷贝examples/chaincode/go/example02目录下的文件到multipeer/chaincode/go/example02目录下。
3 启动Fabric网络
1) 启动peer 

# cd $GOPATH/src/github.com/hyperledger/fabric/multipeer

# docker-compose -f docker-compose-peer.yaml up -d

2) 启动cli容器 

# docker exec -it cli bash

3) 拷贝mychannel.block到peer中
命令的xxxxxxxx替换为图中红框中的字符。 

# exit

# docker cp /opt/gopath/src/github.com/hyperledger/fabric/multipeer/mychannel.block xxxxxxxx:/opt/gopath/src/github.com/hyperledger/fabric/peer/

4) Peer加入Channel 

# docker exec -it cli bash

# peer channel join -b mychannel.block

4 安装与运行智能合约
1） 安装智能合约 

# peer chaincode install -n mycc -p github.com/hyperledger/fabric/multipeer/chaincode/go/example02/cmd/ -v 1.0

2） Peer上查询a，显示60 

# peer chaincode query -C mychannel -n mycc -c '{"Args":["query","a"]}'

查询a成功结果如下图所示：


图：查询a成功结果

3） Peer上进行a向b转30交易 

# ORDERER_CA=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/ordererOrganizations/example.com/orderers/orderer.example.com/msp/tlscacerts/tlsca.example.com-cert.pem

# peer chaincode invoke --tls --cafile $ORDERER_CA -C mychannel -n mycc -c '{"Args":["invoke","a","b","30"]}'

交易成功结果如下图所示：


图：交易成功结果

4） Peer上查询b，显示270 

# peer chaincode query -C mychannel -n mycc -c '{"Args":["query","b"]}'

查询b成功结果如下图所示：

相关阅读

目录[+]