正文
Poj(1459)，最大流，EK算法
提示：扫一扫查出行【扫一扫了解最新限行尾号】
复制提示
题目链接：http://poj.org/problem?id=1459
Power Network
| Time Limit: 2000MS | Memory Limit: 32768K | |
| Total Submissions: 27074 | Accepted: 14066 |
Description
A power network consists of nodes (power stations, consumers and dispatchers) connected by power transport lines. A node u may be supplied with an amount s(u) >= 0 of power, may produce an amount 0 <= p(u) <= pmax(u) of power, may consume an amount 0 <= c(u) <= min(s(u),cmax(u)) of power, and may deliver an amount d(u)=s(u)+p(u)-c(u) of power. The following restrictions apply: c(u)=0 for any power station, p(u)=0 for any consumer, and p(u)=c(u)=0 for any dispatcher. There is at most one power transport line (u,v) from a node u to a node v in the net; it transports an amount 0 <= l(u,v) <= lmax(u,v) of power delivered by u to v. Let Con=Σuc(u) be the power consumed in the net. The problem is to compute the maximum value of Con.
An example is in figure 1. The label x/y of power station u shows that p(u)=x and pmax(u)=y. The label x/y of consumer u shows that c(u)=x and cmax(u)=y. The label x/y of power transport line (u,v) shows that l(u,v)=x and lmax(u,v)=y. The power consumed is Con=6. Notice that there are other possible states of the network but the value of Con cannot exceed 6.
An example is in figure 1. The label x/y of power station u shows that p(u)=x and pmax(u)=y. The label x/y of consumer u shows that c(u)=x and cmax(u)=y. The label x/y of power transport line (u,v) shows that l(u,v)=x and lmax(u,v)=y. The power consumed is Con=6. Notice that there are other possible states of the network but the value of Con cannot exceed 6.
Input
There are several data sets in the input. Each data set encodes a power network. It starts with four integers: 0 <= n <= 100 (nodes), 0 <= np <= n (power stations), 0 <= nc <= n (consumers), and 0 <= m <= n^2 (power transport lines). Follow m data triplets (u,v)z, where u and v are node identifiers (starting from 0) and 0 <= z <= 1000 is the value of lmax(u,v). Follow np doublets (u)z, where u is the identifier of a power station and 0 <= z <= 10000 is the value of pmax(u). The data set ends with nc doublets (u)z, where u is the identifier of a consumer and 0 <= z <= 10000 is the value of cmax(u). All input numbers are integers. Except the (u,v)z triplets and the (u)z doublets, which do not contain white spaces, white spaces can occur freely in input. Input data terminate with an end of file and are correct.
Output
For each data set from the input, the program prints on the standard output the maximum amount of power that can be consumed in the corresponding network. Each result has an integral value and is printed from the beginning of a separate line.
Sample Input
2 1 1 2 (0,1)20 (1,0)10 (0)15 (1)20
7 2 3 13 (0,0)1 (0,1)2 (0,2)5 (1,0)1 (1,2)8 (2,3)1 (2,4)7
(3,5)2 (3,6)5 (4,2)7 (4,3)5 (4,5)1 (6,0)5
(0)5 (1)2 (3)2 (4)1 (5)4
Sample Output
15
6
Hint
The sample input contains two data sets. The first data set encodes a network with 2 nodes, power station 0 with pmax(0)=15 and consumer 1 with cmax(1)=20, and 2 power transport lines with lmax(0,1)=20 and lmax(1,0)=10. The maximum value of Con is 15. The second data set encodes the network from figure 1.
Source
Southeastern Europe 2003
题意：给几个发电站，给几个消耗站，再给几个转发点。发电站只发电，消耗站只消耗电，转发点只是转发电，再给各个传送线的传电能力。问你消耗站能获得的最多电是多少。
分析：加一个超级源点，和一个超级汇点。
这个题之前做过。记录一下EK的思想吧。
EK:
广搜每一层节点，每次都记录增广路上的最小流量，汇点的最小流量为0时，说明没有增广路了。根据汇点的最小流量，更新流。
有一点要注意的是，搜索第一层后，记得标记，再往下一层搜，一直搜到汇点为止，但是我这里好像是没有标记，其实标记了，node[i]没有标记为0.
输入有空格。
#include <stdio.h>
#include <string.h>
#include <queue>
#include <iostream>using namespace std;#define MAX 120
#define INF 0x3f3f3f3fint n,np,nc,m;
int cap[MAX][MAX];int main()
{
//freopen("input.txt","r",stdin);
int from,to,value;
while(scanf("%d%d%d%d",&n,&np,&nc,&m)!=EOF)
{ memset(cap,,sizeof(cap)); ///读取输电线的数据
while(m--)
{
scanf(" (%d,%d)%d",&from,&to,&value);
cap[from][to]=value;
} ///读取发电站数据
while(np--)
{
scanf(" (%d)%d",&from,&value);
cap[n][from]=value;
} ///读取消费者数据
while(nc--)
{
scanf(" (%d)%d",&from,&value);
cap[from][n+]=value;
} int ans = ;
queue<int> Q;
int flow[MAX][MAX]; ///剩余网络
int node[MAX]; ///最小流
int pre[MAX]; ///增广路径 memset(flow,,sizeof(flow)); while(true)
{
Q.push(n);
memset(node,,sizeof(node));
node[n] = INF;
int u;
while(!Q.empty())
{
u = Q.front();
Q.pop();
for(int i=; i<=n+; i++)
{
if(!node[i]&&cap[u][i]>flow[u][i])
{
Q.push(i);
node[i] = min(node[u],cap[u][i]-flow[u][i]);
pre[i] = u;
}
}
} if(node[n+]==)
break; for(u=n+; u!=n; u=pre[u])
{
flow[pre[u]][u] +=node[n+];
flow[u][pre[u]] -= node[n+];
} ans+=node[n+]; }
printf("%d\n",ans);
} return ;
}
