TCP KeepAlive的几个附加选项

提示：扫一扫查出行
【扫一扫了解最新限行尾号】
复制提示

TCP_KEEPALIVE选项只是一个开关，Linux中默认的Keepalive的选项如下：

$sudo sysctl -a | grep keepalive

net.ipv4.tcp_keepalive_time = 7200

net.ipv4.tcp_keepalive_probes = 9

net.ipv4.tcp_keepalive_intvl = 75

上文中的keepalive选项表示如果一个连接上7200s后没有任何数据发送，则设置了这个选项的本端向对端发送keepalive保活报文，它会有如下三种结果：

对端回复ACK。则本端TCP认为该连接依然存活。继续等7200s后再发送keepalive报文。
对端回复RESET。说明对端进程已经重启，本端的应用程序应该关闭该连接。
没有对端的任何回复。则本端做重试，如果重试9次（前后重试间隔为75秒）仍然不可达，则向应用程序返回错误信息，ETIMEOUT（无任何应答）或EHOST

如果应用程序向改变keepalive的默认行为，该怎么办呢？答案就是利用 TCP_KEEPIDLE、TCP_KEEPINTVL、TCP_KEEPCNT这几个TCP选项，首先看看如何使用：

int setKeepAlive(int fd, int interval)

{

    int val = 1;

    if (setsockopt(fd, SOL_SOCKET, SO_KEEPALIVE, &val, sizeof(val)) == -1) {

        printf("setsockopt SO_KEEPALIVE: %s", strerror(errno));

        return -1;

    }

    /* Send first probe after `interval' seconds. */

    val = interval;

    if (setsockopt(fd, IPPROTO_TCP, TCP_KEEPIDLE, &val, sizeof(val)) < 0) {

        printf("setsockopt TCP_KEEPIDLE: %s\n", strerror(errno));

        return -1;

    }

    /* Send next probes after the specified interval. Note that we set the

     * delay as interval / 3, as we send three probes before detecting

     * an error (see the next setsockopt call). */

    val = interval/3;

    if (val == 0) val = 1;

    if (setsockopt(fd, IPPROTO_TCP, TCP_KEEPINTVL, &val, sizeof(val)) < 0) {

        printf("setsockopt TCP_KEEPINTVL: %s\n", strerror(errno));

        return -1;

    }

    /* Consider the socket in error state after three we send three ACK

     * probes without getting a reply. */

    val = 3;

    if (setsockopt(fd, IPPROTO_TCP, TCP_KEEPCNT, &val, sizeof(val)) < 0) {

        printf("setsockopt TCP_KEEPCNT: %s\n", strerror(errno));

        return -1;

    }

    return 0;

}