正文
DirectX11 With Windows SDK--11 混合状态
提示：扫一扫查出行【扫一扫了解最新限行尾号】
复制提示
原文:DirectX11 With Windows SDK--11 混合状态
前言
这一章会着重讲述混合状态，在下一章则会讲述深度/模板状态
DirectX11 With Windows SDK完整目录
Github项目源码
欢迎加入QQ群: 727623616 可以一起探讨DX11，以及有什么问题也可以在这里汇报。
混合等式
对于两个相同位置的像素点，规定\(C_{src}\)为源像素的颜色（从像素着色器输出的像素），\(C_{dst}\)为目标像素的颜色（已经存在于后备缓冲区上的像素）。在Direct3D中使用下面的混合等式来将源像素色和目标像素色进行混合：
\[ \mathbf{C} = \mathbf{C}_{src} \otimes \mathbf{F}_{src} \boxplus \mathbf{C}_{dst} \otimes \mathbf{F}_{dst}\]
其中\(\otimes\)运算符为分量乘法，即\(\mathbf{C}_{src} \otimes \mathbf{F}_{src}\) 实际上得到的是\((R_{src}*R_{dst}, G_{src}*G_{dst}, B_{src}*B_{dst})\)
而\(\mathbf{F}_{src}\) 和 \(\mathbf{F}_{dst}\)的值，以及运算符 \(\boxplus\) 的具体含义都需要在程序中进行指定。
对于Alpha通道的值，运算公式和上面的类似，并且两个等式的运算是分开进行的：
\[ A = A_{src} * F_{src} \boxplus A_{dst} * F_{dst}\]
同理该运算符 \(\boxplus\) 的含义也需要另外进行设置。
混合状态
混合运算符的设置
对于运算符 \(\boxplus\) 的含义，可以使用下面的枚举类型
D3D11_BLEND_OP
来描述：
| 枚举值 | 含义 |
|---|---|
| D3D11_BLEND_OP_ADD = 1 | \(\mathbf{C} = \mathbf{C}_{src} \otimes \mathbf{F}_{src} + \mathbf{C}_{dst} \otimes \mathbf{F}_{dst}\) 或 \(A = A_{src} * F_{src} + A_{dst} * F_{dst}\) |
| D3D11_BLEND_OP_SUBTRACT = 2 | \(\mathbf{C} = \mathbf{C}_{dst} \otimes \mathbf{F}_{dst} - \mathbf{C}_{src} \otimes \mathbf{F}_{src}\) 或 \(A = A_{dst} * F_{dst} - A_{src} * F_{src}\) |
| D3D11_BLEND_OP_REV_SUBTRACT = 3 | \(\mathbf{C} = \mathbf{C}_{src} \otimes \mathbf{F}_{src} - \mathbf{C}_{dst} \otimes \mathbf{F}_{dst}\) 或 \(A = A_{src} * F_{src} - A_{dst} * F_{dst}\) |
| D3D11_BLEND_OP_MIN = 4 | \(\mathbf{C} = min(\mathbf{C}_{src}, \mathbf{C}_{dst})\) 或 \(A = min(A_{src}, A_{dst})\) |
| D3D11_BLEND_OP_MAX = 5 | \(\mathbf{C} = max(\mathbf{C}_{src}, \mathbf{C}_{dst})\) 或 \(A = max(A_{src}, A_{dst})\) |
再次提醒，你可以分开指定运算颜色和Alpha通道的运算符。
混合因子的设置
对于混合公式，我们可以按需要设置混合因子。混合因子使用枚举类型
D3D11_BLEND
类型进行描述：
| 枚举值 | 含义 |
|---|---|
| D3D11_BLEND_ZERO = 1 | \(\mathbf{F}=(0,0,0)\) 或 \(F=0\) |
| D3D11_BLEND_ONE = 2 | \(\mathbf{F}=(1,1,1)\) 或 \(F=1\) |
| D3D11_BLEND_SRC_COLOR = 3 | \(\mathbf{F}=(r_{src},g_{src},b_{src})\) |
| D3D11_BLEND_INV_SRC_COLOR = 4 | \(\mathbf{F}=(1-r_{src},1-g_{src},1-b_{src})\) |
| D3D11_BLEND_SRC_ALPHA = 5 | \(\mathbf{F}=(a_{src},a_{src},a_{src})\) 或 \(F=a_{src}\) |
| D3D11_BLEND_INV_SRC_ALPHA = 6 | \(\mathbf{F}=(1-a_{src},1-a_{src},1-a_{src})\) 或 \(F=1-a_{src}\) |
| D3D11_BLEND_DEST_ALPHA = 7 | \(\mathbf{F}=(a_{dst},a_{dst},a_{dst})\) 或 \(F=a_{dst}\) |
| D3D11_BLEND_INV_DEST_ALPHA = 8 | \(\mathbf{F}=(1-a_{dst},1-a_{dst},1-a_{dst})\) 或 \(F=1-a_{dst}\) |
| D3D11_BLEND_DEST_COLOR = 9 | \(\mathbf{F}=(r_{dst},g_{dst},b_{dst})\) |
| D3D11_BLEND_INV_DEST_COLOR = 10 | \(\mathbf{F}=(1-r_{dst},1-g_{dst},1-b_{dst})\) |
| D3D11_BLEND_SRC_ALPHA_SAT = 11 | \(\mathbf{F}=(sat(a_{src}),sat(a_{src}),sat(a_{src}))\) 或 \(F=sat(a_{src})\) |
| D3D11_BLEND_BLEND_FACTOR = 14 |
\(\mathbf{F}\) 的值来自于
ID3D11DeviceContext::OMSetBlendState
方法的
BlendFactor
参数
|
| D3D11_BLEND_INV_BLEND_FACTOR = 15 |
\(\mathbf{F}\) 的值来自于
ID3D11DeviceContext::OMSetBlendState
方法的
BlendFactor
参数,并设为
1 - BlendFactor
|
其中
sat
函数将值限定在[0.0, 1.0]之间。
ID3D11Device::CreateBlendState方法--创建混合状态
在创建混合状态前，需要填充
D3D11_BLEND_DESC
结构体：
typedef struct D3D11_BLEND_DESC
{
BOOL AlphaToCoverageEnable; // 默认关闭，这里
BOOL IndependentBlendEnable; // 是否每个渲染目标都有独立的混合混合描述，关闭的话都使用索引为0的描述信息
D3D11_RENDER_TARGET_BLEND_DESC RenderTarget[ 8 ];
} D3D11_BLEND_DESC;
typedef struct D3D11_RENDER_TARGET_BLEND_DESC
{
BOOL BlendEnable; // 是否开启混合
D3D11_BLEND SrcBlend; // 源颜色混合因子
D3D11_BLEND DestBlend; // 目标颜色混合因子
D3D11_BLEND_OP BlendOp; // 颜色混合运算符
D3D11_BLEND SrcBlendAlpha; // 源Alpha混合因子
D3D11_BLEND DestBlendAlpha; // 目标Alpha混合因子
D3D11_BLEND_OP BlendOpAlpha; // Alpha混合运算符
UINT8 RenderTargetWriteMask; // D3D11_COLOR_WRITE_ENABLE枚举类型来指定可以写入的颜色
} D3D11_RENDER_TARGET_BLEND_DESC;
枚举类型
D3D11_COLOR_WRITE_ENABLE
有如下枚举值：
| 枚举值 | 含义 |
|---|---|
| D3D11_COLOR_WRITE_ENABLE_RED = 1 | 可以写入红色 |
| D3D11_COLOR_WRITE_ENABLE_GREEN = 2 | 可以写入绿色 |
| D3D11_COLOR_WRITE_ENABLE_BLUE = 4 | 可以写入蓝色 |
| D3D11_COLOR_WRITE_ENABLE_ALPHA = 8 | 可以写入ALPHA通道 |
| D3D11_COLOR_WRITE_ENABLE_ALL = 15 | 可以写入所有颜色 |
若你想指定红色和ALPHA通道可以写入，可以用位运算与结合起来，即
D3D11_COLOR_WRITE_ENABLE_RED | D3D11_COLOR_WRITE_ENABLE_ALPHA
ID3D11Device::CreateBlendState
含义如下：
HRESULT ID3D11Device::CreateBlendState(
const D3D11_BLEND_DESC *pBlendStateDesc, // [In]混合状态描述
ID3D11BlendState **ppBlendState); // [Out]输出混合状态ID3D11DeviceContext::OMSetBlendState方法--输出合并阶段设置混合状态
方法如下：
void ID3D11DeviceContext::OMSetBlendState(
ID3D11BlendState *pBlendState, // [In]混合状态，如果要使用默认混合状态则提供nullptr
const FLOAT [4] BlendFactor, // [In]混合因子，如不需要可以为nullptr
UINT SampleMask); // [In]采样掩码，默认为0xffffffff默认混合状态如下：
AlphaToCoverageEnable = false;
IndependentBlendEnable = false;
RenderTarget[0].BlendEnable = false;
RenderTarget[0].SrcBlend = D3D11_BLEND_ONE
RenderTarget[0].DestBlend = D3D11_BLEND_ZERO
RenderTarget[0].BlendOp = D3D11_BLEND_OP_ADD
RenderTarget[0].SrcBlendAlpha = D3D11_BLEND_ONE
RenderTarget[0].DestBlendAlpha = D3D11_BLEND_ZERO
RenderTarget[0].BlendOpAlpha = D3D11_BLEND_OP_ADD
RenderTarget[0].RenderTargetWriteMask = D3D11_COLOR_WRITE_ENABLE_ALL
采样掩码的设置主要是针对多重采样的操作，若采样掩码的第i位为0，则对应第i次采样将不进行，但这得在实际上进行不小于i次的采样时才会起作用。通常情况下设为
0xffffffff
来允许所有采样操作
常用混合等式
无颜色写入混合
无颜色写入混合公式如下：
\(\mathbf{C} = \mathbf{C}_{src} \otimes \mathbf{F}_{src} \boxplus \mathbf{C}_{dst} \otimes \mathbf{F}_{dst}\)
\(\mathbf{C} = \mathbf{C}_{src} \otimes (0,0,0) + \mathbf{C}_{dst} \otimes (1,1,1)\)
\(\mathbf{C} = \mathbf{C}_{dst}\)
同样，Alpha值也应当保留
\(A = A_{dst}\)
颜色加法混合
颜色加法混合公式如下：
\(\mathbf{C} = \mathbf{C}_{src} \otimes \mathbf{F}_{src} \boxplus \mathbf{C}_{dst} \otimes \mathbf{F}_{dst}\)
\(\mathbf{C} = \mathbf{C}_{src} \otimes (1,1,1) + \mathbf{C}_{dst} \otimes (1,1,1)\)
\(\mathbf{C} = \mathbf{C}_{src} + \mathbf{C}_{dst}\)
最终的Alpha值是多少并不影响前面的运算，因此可以设为任意值，这里设为源像素Alpha值：
\(A = A_{src}\)
透明混合
透明混合公式如下：
\(\mathbf{C} = \mathbf{C}_{src} \otimes \mathbf{F}_{src} \boxplus \mathbf{C}_{dst} \otimes \mathbf{F}_{dst}\)
\(\mathbf{C} = \mathbf{C}_{src} \otimes (A_{src},A_{src},A_{src}) + \mathbf{C}_{dst} \otimes ((1-A_{src}),(1-A_{src}),(1-A_{src}))\)
\(\mathbf{C} = A_{src}\mathbf{C}_{src} + (1-A_{src})\mathbf{C}_{dst}\)
最终的Alpha值是多少并不影响前面的运算，因此可以设为任意值，这里设为源像素Alpha值：
\(A = A_{src}\)
但需要注意的是，透明混合的绘制顺序是十分重要的。首先必须按照摄像机到物体的距离，对物体进行排序，然后按照从后到前的顺序进行混合。因为如果一个对象是透明的，我们就可以通过它看到背后的场景。如果先绘制较前的透明物体，那么深度缓冲区的值会被刷新，然后较后的透明物体会因为深度测试不通过而不被绘制：
可以看到，上图是先绘制水面然后绘制篱笆盒，这样会导致篱笆盒的下半部分因为深度比水面大而导致不通过深度测试，从而没有被绘制出来。所以在绘制透明物体前，要么关闭深度测试，要么对物体到摄像机的先后顺序进行排序，并按从后到前的顺序进行绘制。
HLSL代码的变化
首先在常量缓冲区上，需要将材质移到每物体绘制的常量缓冲区内，因为现在从现在的例子开始，不同的物体在材质上是不同的，需要频繁更新：
cbuffer CBChangesEveryDrawing : register(b0)
{
matrix g_World;
matrix g_WorldInvTranspose;
Material g_Material;
}
cbuffer CBChangesEveryFrame : register(b1)
{
matrix g_View;
float3 g_EyePosW;
}
cbuffer CBChangesOnResize : register(b2)
{
matrix g_Proj;
}
cbuffer CBChangesRarely : register(b3)
{
DirectionalLight g_DirLight[10];
PointLight g_PointLight[10];
SpotLight g_SpotLight[10];
int g_NumDirLight;
int g_NumPointLight;
int g_NumSpotLight;
float g_Pad;
}
然后在像素着色器上，可以对alpha值过低的像素进行裁剪，通过调用
clip
函数，若参数的值小于0，则该像素会被裁剪掉，从而避免后续的光照运算。在下面的例子中，alpha值低于0.1的像素都会被裁剪掉。
// Basic_PS_3D.hlsl
#include "Basic.hlsli"
// 像素着色器(3D)
float4 PS_3D(VertexPosHWNormalTex pIn) : SV_Target
{
// 提前进行裁剪，对不符合要求的像素可以避免后续运算
float4 texColor = g_Tex.Sample(g_SamLinear, pIn.Tex);
clip(texColor.a - 0.1f);
// ...
// 计算
float4 litColor = texColor * (ambient + diffuse) + spec;
litColor.a = texColor.a * g_Material.Diffuse.a;
return litColor;
}
// Basic_PS_2D.hlsl
#include "Basic.hlsli"
// 像素着色器(2D)
float4 PS_2D(VertexPosHTex pIn) : SV_Target
{
float4 color = g_Tex.Sample(g_SamLinear, pIn.Tex);
clip(color.a - 0.1f);
return color;
}
C++代码的变化
RenderStates类
RenderStates
类可以一次性创建出所有可能需要用到的状态对象，然后在需要的时候可以获取它的静态成员，并且因为使用了ComPtr智能指针，无需管理内存：
class RenderStates
{
public:
template <class T>
using ComPtr = Microsoft::WRL::ComPtr<T>;
static void InitAll(ID3D11Device * device);
// 使用ComPtr无需手工释放
public:
static ComPtr<ID3D11RasterizerState> RSWireframe; // 光栅化器状态：线框模式
static ComPtr<ID3D11RasterizerState> RSNoCull; // 光栅化器状态：无背面裁剪模式
static ComPtr<ID3D11SamplerState> SSLinearWrap; // 采样器状态：线性过滤
static ComPtr<ID3D11SamplerState> SSAnistropicWrap; // 采样器状态：各项异性过滤
static ComPtr<ID3D11BlendState> BSNoColorWrite; // 混合状态：不写入颜色
static ComPtr<ID3D11BlendState> BSTransparent; // 混合状态：透明混合
static ComPtr<ID3D11BlendState> BSAlphaToCoverage; // 混合状态：Alpha-To-Coverage
};
而具体实现如下：
using namespace Microsoft::WRL;
ComPtr<ID3D11RasterizerState> RenderStates::RSNoCull = nullptr;
ComPtr<ID3D11RasterizerState> RenderStates::RSWireframe = nullptr;
ComPtr<ID3D11SamplerState> RenderStates::SSAnistropicWrap = nullptr;
ComPtr<ID3D11SamplerState> RenderStates::SSLinearWrap = nullptr;
ComPtr<ID3D11BlendState> RenderStates::BSAlphaToCoverage = nullptr;
ComPtr<ID3D11BlendState> RenderStates::BSNoColorWrite = nullptr;
ComPtr<ID3D11BlendState> RenderStates::BSTransparent = nullptr;
void RenderStates::InitAll(ID3D11Device * device)
{
// 先前初始化过的话就没必要重来了
if (IsInit())
return;
// ***********初始化光栅化器状态***********
D3D11_RASTERIZER_DESC rasterizerDesc;
ZeroMemory(&rasterizerDesc, sizeof(rasterizerDesc));
// 线框模式
rasterizerDesc.FillMode = D3D11_FILL_WIREFRAME;
rasterizerDesc.CullMode = D3D11_CULL_NONE;
rasterizerDesc.FrontCounterClockwise = false;
rasterizerDesc.DepthClipEnable = true;
HR(device->CreateRasterizerState(&rasterizerDesc, RSWireframe.GetAddressOf()));
// 无背面剔除模式
rasterizerDesc.FillMode = D3D11_FILL_SOLID;
rasterizerDesc.CullMode = D3D11_CULL_NONE;
rasterizerDesc.FrontCounterClockwise = false;
rasterizerDesc.DepthClipEnable = true;
HR(device->CreateRasterizerState(&rasterizerDesc, RSNoCull.GetAddressOf()));
// ***********初始化采样器状态***********
D3D11_SAMPLER_DESC sampDesc;
ZeroMemory(&sampDesc, sizeof(sampDesc));
// 线性过滤模式
sampDesc.Filter = D3D11_FILTER_MIN_MAG_MIP_LINEAR;
sampDesc.AddressU = D3D11_TEXTURE_ADDRESS_WRAP;
sampDesc.AddressV = D3D11_TEXTURE_ADDRESS_WRAP;
sampDesc.AddressW = D3D11_TEXTURE_ADDRESS_WRAP;
sampDesc.ComparisonFunc = D3D11_COMPARISON_NEVER;
sampDesc.MinLOD = 0;
sampDesc.MaxLOD = D3D11_FLOAT32_MAX;
HR(device->CreateSamplerState(&sampDesc, SSLinearWrap.GetAddressOf()));
// 各向异性过滤模式
sampDesc.Filter = D3D11_FILTER_ANISOTROPIC;
sampDesc.AddressU = D3D11_TEXTURE_ADDRESS_WRAP;
sampDesc.AddressV = D3D11_TEXTURE_ADDRESS_WRAP;
sampDesc.AddressW = D3D11_TEXTURE_ADDRESS_WRAP;
sampDesc.ComparisonFunc = D3D11_COMPARISON_NEVER;
sampDesc.MaxAnisotropy = 4;
sampDesc.MinLOD = 0;
sampDesc.MaxLOD = D3D11_FLOAT32_MAX;
HR(device->CreateSamplerState(&sampDesc, SSAnistropicWrap.GetAddressOf()));
// ***********初始化混合状态***********
D3D11_BLEND_DESC blendDesc;
ZeroMemory(&blendDesc, sizeof(blendDesc));
auto& rtDesc = blendDesc.RenderTarget[0];
// Alpha-To-Coverage模式
blendDesc.AlphaToCoverageEnable = true;
blendDesc.IndependentBlendEnable = false;
rtDesc.BlendEnable = false;
rtDesc.RenderTargetWriteMask = D3D11_COLOR_WRITE_ENABLE_ALL;
HR(device->CreateBlendState(&blendDesc, BSAlphaToCoverage.GetAddressOf()));
// 透明混合模式
// Color = SrcAlpha * SrcColor + (1 - SrcAlpha) * DestColor
// Alpha = SrcAlpha
blendDesc.AlphaToCoverageEnable = false;
blendDesc.IndependentBlendEnable = false;
rtDesc.BlendEnable = true;
rtDesc.SrcBlend = D3D11_BLEND_SRC_ALPHA;
rtDesc.DestBlend = D3D11_BLEND_INV_SRC_ALPHA;
rtDesc.BlendOp = D3D11_BLEND_OP_ADD;
rtDesc.SrcBlendAlpha = D3D11_BLEND_ONE;
rtDesc.DestBlendAlpha = D3D11_BLEND_ZERO;
rtDesc.BlendOpAlpha = D3D11_BLEND_OP_ADD;
HR(device->CreateBlendState(&blendDesc, BSTransparent.GetAddressOf()));
// 无颜色写入混合模式
// Color = DestColor
// Alpha = DestAlpha
rtDesc.SrcBlend = D3D11_BLEND_ZERO;
rtDesc.DestBlend = D3D11_BLEND_ONE;
rtDesc.BlendOp = D3D11_BLEND_OP_ADD;
rtDesc.SrcBlendAlpha = D3D11_BLEND_ZERO;
rtDesc.DestBlendAlpha = D3D11_BLEND_ONE;
rtDesc.BlendOpAlpha = D3D11_BLEND_OP_ADD;
HR(device->CreateBlendState(&blendDesc, BSNoColorWrite.GetAddressOf()));
}
GameApp类的变化
首先内含的
GameObject
类需要添加
Material
类的存储，并提供
GameObject::SetMaterial
方法用于设置材质。这里不详细描述。
GameApp::InitResource方法的变化
该方法有如下变化：
- 初始化了篱笆盒、墙体、地板和静止水面物体
- 将摄像机设置为仅第三人称
- 设置了光栅化状态为无背面裁剪模式（因为透明情况下可以看到物体的背面）
- 设置了混合状态为透明混合模式
bool GameApp::InitResource()
{
// ******************
// 设置常量缓冲区描述
//
D3D11_BUFFER_DESC cbd;
ZeroMemory(&cbd, sizeof(cbd));
cbd.Usage = D3D11_USAGE_DYNAMIC;
cbd.BindFlags = D3D11_BIND_CONSTANT_BUFFER;
cbd.CPUAccessFlags = D3D11_CPU_ACCESS_WRITE;
// 新建用于VS和PS的常量缓冲区
cbd.ByteWidth = sizeof(CBChangesEveryDrawing);
HR(m_pd3dDevice->CreateBuffer(&cbd, nullptr, m_pConstantBuffers[0].GetAddressOf()));
cbd.ByteWidth = sizeof(CBChangesEveryFrame);
HR(m_pd3dDevice->CreateBuffer(&cbd, nullptr, m_pConstantBuffers[1].GetAddressOf()));
cbd.ByteWidth = sizeof(CBChangesOnResize);
HR(m_pd3dDevice->CreateBuffer(&cbd, nullptr, m_pConstantBuffers[2].GetAddressOf()));
cbd.ByteWidth = sizeof(CBChangesRarely);
HR(m_pd3dDevice->CreateBuffer(&cbd, nullptr, m_pConstantBuffers[3].GetAddressOf()));
// ******************
// 初始化游戏对象
//
ComPtr<ID3D11ShaderResourceView> texture;
Material material{};
material.ambient = XMFLOAT4(0.5f, 0.5f, 0.5f, 1.0f);
material.diffuse = XMFLOAT4(1.0f, 1.0f, 1.0f, 1.0f);
material.specular = XMFLOAT4(0.2f, 0.2f, 0.2f, 16.0f);
// 初始化篱笆盒
HR(CreateDDSTextureFromFile(m_pd3dDevice.Get(), L"Texture\\WireFence.dds", nullptr, texture.GetAddressOf()));
m_WireFence.SetBuffer(m_pd3dDevice.Get(), Geometry::CreateBox());
m_WireFence.SetTexture(texture.Get());
m_WireFence.SetMaterial(material);
// 初始化地板
HR(CreateDDSTextureFromFile(m_pd3dDevice.Get(), L"Texture\\floor.dds", nullptr, texture.ReleaseAndGetAddressOf()));
m_Floor.SetBuffer(m_pd3dDevice.Get(),
Geometry::CreatePlane(XMFLOAT3(0.0f, -1.0f, 0.0f), XMFLOAT2(20.0f, 20.0f), XMFLOAT2(5.0f, 5.0f)));
m_Floor.SetTexture(texture.Get());
m_Floor.SetMaterial(material);
// 初始化墙体
m_Walls.resize(4);
HR(CreateDDSTextureFromFile(m_pd3dDevice.Get(), L"Texture\\brick.dds", nullptr, texture.ReleaseAndGetAddressOf()));
// 这里控制墙体四个面的生成
for (int i = 0; i < 4; ++i)
{
m_Walls[i].SetBuffer(m_pd3dDevice.Get(),
Geometry::CreatePlane(XMFLOAT3(), XMFLOAT2(20.0f, 8.0f), XMFLOAT2(5.0f, 1.5f)));
XMMATRIX world = XMMatrixRotationX(-XM_PIDIV2) * XMMatrixRotationY(XM_PIDIV2 * i)
* XMMatrixTranslation(i % 2 ? -10.0f * (i - 2) : 0.0f, 3.0f, i % 2 == 0 ? -10.0f * (i - 1) : 0.0f);
m_Walls[i].SetMaterial(material);
m_Walls[i].SetWorldMatrix(world);
m_Walls[i].SetTexture(texture.Get());
}
// 初始化水
material.ambient = XMFLOAT4(0.5f, 0.5f, 0.5f, 1.0f);
material.diffuse = XMFLOAT4(1.0f, 1.0f, 1.0f, 0.5f);
material.specular = XMFLOAT4(0.8f, 0.8f, 0.8f, 32.0f);
HR(CreateDDSTextureFromFile(m_pd3dDevice.Get(), L"Texture\\water.dds", nullptr, texture.ReleaseAndGetAddressOf()));
m_Water.SetBuffer(m_pd3dDevice.Get(),
Geometry::CreatePlane(XMFLOAT3(), XMFLOAT2(20.0f, 20.0f), XMFLOAT2(10.0f, 10.0f)));
m_Water.SetTexture(texture.Get());
m_Water.SetMaterial(material);
// ******************
// 初始化常量缓冲区的值
//
// 初始化每帧可能会变化的值
auto camera = std::shared_ptr<ThirdPersonCamera>(new ThirdPersonCamera);
m_pCamera = camera;
camera->SetViewPort(0.0f, 0.0f, (float)m_ClientWidth, (float)m_ClientHeight);
camera->SetTarget(XMFLOAT3(0.0f, 0.5f, 0.0f));
camera->SetDistance(5.0f);
camera->SetDistanceMinMax(2.0f, 14.0f);
// 初始化仅在窗口大小变动时修改的值
m_pCamera->SetFrustum(XM_PI / 3, AspectRatio(), 0.5f, 1000.0f);
m_CBOnResize.proj = XMMatrixTranspose(m_pCamera->GetProjXM());
// ******************
// 初始化不会变化的值
//
// 环境光
m_CBRarely.dirLight[0].ambient = XMFLOAT4(0.5f, 0.5f, 0.5f, 1.0f);
m_CBRarely.dirLight[0].diffuse = XMFLOAT4(0.8f, 0.8f, 0.8f, 1.0f);
m_CBRarely.dirLight[0].specular = XMFLOAT4(0.5f, 0.5f, 0.5f, 1.0f);
m_CBRarely.dirLight[0].direction = XMFLOAT3(0.0f, -1.0f, 0.0f);
// 灯光
m_CBRarely.pointLight[0].position = XMFLOAT3(0.0f, 15.0f, 0.0f);
m_CBRarely.pointLight[0].ambient = XMFLOAT4(0.5f, 0.5f, 0.5f, 1.0f);
m_CBRarely.pointLight[0].diffuse = XMFLOAT4(0.6f, 0.6f, 0.6f, 1.0f);
m_CBRarely.pointLight[0].specular = XMFLOAT4(0.2f, 0.2f, 0.2f, 1.0f);
m_CBRarely.pointLight[0].att = XMFLOAT3(0.0f, 0.1f, 0.0f);
m_CBRarely.pointLight[0].range = 25.0f;
m_CBRarely.numDirLight = 1;
m_CBRarely.numPointLight = 1;
m_CBRarely.numSpotLight = 0;
// 更新不容易被修改的常量缓冲区资源
D3D11_MAPPED_SUBRESOURCE mappedData;
HR(m_pd3dImmediateContext->Map(m_pConstantBuffers[2].Get(), 0, D3D11_MAP_WRITE_DISCARD, 0, &mappedData));
memcpy_s(mappedData.pData, sizeof(CBChangesOnResize), &m_CBOnResize, sizeof(CBChangesOnResize));
m_pd3dImmediateContext->Unmap(m_pConstantBuffers[2].Get(), 0);
HR(m_pd3dImmediateContext->Map(m_pConstantBuffers[3].Get(), 0, D3D11_MAP_WRITE_DISCARD, 0, &mappedData));
memcpy_s(mappedData.pData, sizeof(CBChangesRarely), &m_CBRarely, sizeof(CBChangesRarely));
m_pd3dImmediateContext->Unmap(m_pConstantBuffers[3].Get(), 0);
// 初始化所有渲染状态
RenderStates::InitAll(m_pd3dDevice.Get());
// ******************
// 给渲染管线各个阶段绑定好所需资源
//
// 设置图元类型，设定输入布局
m_pd3dImmediateContext->IASetPrimitiveTopology(D3D11_PRIMITIVE_TOPOLOGY_TRIANGLELIST);
m_pd3dImmediateContext->IASetInputLayout(m_pVertexLayout3D.Get());
// 预先绑定各自所需的缓冲区，其中每帧更新的缓冲区需要绑定到两个缓冲区上
m_pd3dImmediateContext->VSSetConstantBuffers(0, 1, m_pConstantBuffers[0].GetAddressOf());
m_pd3dImmediateContext->VSSetConstantBuffers(1, 1, m_pConstantBuffers[1].GetAddressOf());
m_pd3dImmediateContext->VSSetConstantBuffers(2, 1, m_pConstantBuffers[2].GetAddressOf());
// 默认绑定3D着色器
m_pd3dImmediateContext->VSSetShader(m_pVertexShader3D.Get(), nullptr, 0);
m_pd3dImmediateContext->RSSetState(RenderStates::RSNoCull.Get());
m_pd3dImmediateContext->PSSetConstantBuffers(0, 1, m_pConstantBuffers[0].GetAddressOf());
m_pd3dImmediateContext->PSSetConstantBuffers(1, 1, m_pConstantBuffers[1].GetAddressOf());
m_pd3dImmediateContext->PSSetConstantBuffers(3, 1, m_pConstantBuffers[3].GetAddressOf());
m_pd3dImmediateContext->PSSetShader(m_pPixelShader3D.Get(), nullptr, 0);
m_pd3dImmediateContext->PSSetSamplers(0, 1, RenderStates::SSLinearWrap.GetAddressOf());
m_pd3dImmediateContext->OMSetBlendState(RenderStates::BSTransparent.Get(), nullptr, 0xFFFFFFFF);
return true;
}
GameApp::UpdateScene方法的变化
现在摄像机只有第三人称：
void GameApp::UpdateScene(float dt)
{
// 更新鼠标事件，获取相对偏移量
Mouse::State mouseState = m_pMouse->GetState();
Mouse::State lastMouseState = m_MouseTracker.GetLastState();
m_MouseTracker.Update(mouseState);
Keyboard::State keyState = m_pKeyboard->GetState();
m_KeyboardTracker.Update(keyState);
// 获取子类
auto cam3rd = std::dynamic_pointer_cast<ThirdPersonCamera>(m_pCamera);
// ******************
// 第三人称摄像机的操作
//
// 绕原点旋转
cam3rd->RotateX(mouseState.y * dt * 1.25f);
cam3rd->RotateY(mouseState.x * dt * 1.25f);
cam3rd->Approach(-mouseState.scrollWheelValue / 120 * 1.0f);
// 更新观察矩阵，并更新每帧缓冲区
m_pCamera->UpdateViewMatrix();
m_CBFrame.eyePos = m_pCamera->GetPositionXM();
m_CBFrame.view = XMMatrixTranspose(m_pCamera->GetViewXM());
// 重置滚轮值
m_pMouse->ResetScrollWheelValue();
// 退出程序，这里应向窗口发送销毁信息
if (m_KeyboardTracker.IsKeyPressed(Keyboard::Escape))
SendMessage(MainWnd(), WM_DESTROY, 0, 0);
D3D11_MAPPED_SUBRESOURCE mappedData;
HR(m_pd3dImmediateContext->Map(m_pConstantBuffers[1].Get(), 0, D3D11_MAP_WRITE_DISCARD, 0, &mappedData));
memcpy_s(mappedData.pData, sizeof(CBChangesEveryFrame), &m_CBFrame, sizeof(CBChangesEveryFrame));
m_pd3dImmediateContext->Unmap(m_pConstantBuffers[1].Get(), 0);
}
GameApp::DrawScene方法的变化
对于3D物体的，要先绘制不透明的物体，然后再绘制透明的物体。而对于透明的物体，这里一定要先绘制靠后的物体，然后才是靠前的物体。而对于不透明的物体，无论视角怎么变化，物体的先后顺序都是不会改变的，所以不会出现有物体的一部分无法绘制的情况：
void GameApp::DrawScene()
{
assert(m_pd3dImmediateContext);
assert(m_pSwapChain);
m_pd3dImmediateContext->ClearRenderTargetView(m_pRenderTargetView.Get(), reinterpret_cast<const float*>(&Colors::Black));
m_pd3dImmediateContext->ClearDepthStencilView(m_pDepthStencilView.Get(), D3D11_CLEAR_DEPTH | D3D11_CLEAR_STENCIL, 1.0f, 0);
// ********************
// 1. 绘制不透明对象
//
m_pd3dImmediateContext->RSSetState(nullptr);
m_pd3dImmediateContext->OMSetBlendState(nullptr, nullptr, 0xFFFFFFFF);
for (auto& wall : m_Walls)
wall.Draw(m_pd3dImmediateContext.Get());
m_Floor.Draw(m_pd3dImmediateContext.Get());
// ********************
// 2. 绘制透明对象
//
m_pd3dImmediateContext->RSSetState(RenderStates::RSNoCull.Get());
m_pd3dImmediateContext->OMSetBlendState(RenderStates::BSTransparent.Get(), nullptr, 0xFFFFFFFF);
// 篱笆盒稍微抬起一点高度
m_WireFence.SetWorldMatrix(XMMatrixTranslation(2.0f, 0.01f, 0.0f));
m_WireFence.Draw(m_pd3dImmediateContext.Get());
m_WireFence.SetWorldMatrix(XMMatrixTranslation(-2.0f, 0.01f, 0.0f));
m_WireFence.Draw(m_pd3dImmediateContext.Get());
// 绘制了篱笆盒后再绘制水面
m_Water.Draw(m_pd3dImmediateContext.Get());
// ********************
// 绘制Direct2D部分
//
// ...
HR(m_pSwapChain->Present(0, 0));
}
最终效果如下：
DirectX11 With Windows SDK完整目录
Github项目源码
欢迎加入QQ群: 727623616 可以一起探讨DX11，以及有什么问题也可以在这里汇报。
