解决Python交叉编译后，键盘方向键乱码的问题

提示：扫一扫查出行
【扫一扫了解最新限行尾号】
复制提示

参考

http://www.alliedjeep.com/38071.htm

https://www.zhihu.com/question/21518507

http://professor.blog.51cto.com/996189/1618390/

概述

前面几篇博文介绍了Python交叉编译到ARM开发板上面，在使用的时候遇到一个问题，就是当按下键盘上面的方向键的时候看到的都是乱码。

平台

主机： ubuntu14.04 64bit

开发板： qemu + aarch64 （参考： http://www.cnblogs.com/pengdonglin137/p/6442583.html）

工具链： aarch64-linux-gnu-gcc (gcc version 4.9.1 20140529) 用于编译aarch64上面运行的程序

Python版本： Python-3.6.0 和 Python-2.7.13

解决

1、下载readline和termcap的源码

readline的下载链接：

http://files.cnblogs.com/files/pengdonglin137/readline-7.0.tar.gz

或者 http://ftp.gnu.org/gnu/readline/readline-7.0.tar.gz

termcap的下载链接：

http://files.cnblogs.com/files/pengdonglin137/termcap-1.3.1.tar.gz

或者 http://ftp.gnu.org/gnu/termcap/termcap-1.3.1.tar.gz

2、交叉编译

readline

解压：

tar -xf readline-7.0.tar.gz
mkdir aarch64
cd aarch64

配置、编译和安装 mk.sh：

#!/bin/bash export PATH=/home/pengdonglin/src/qemu/aarch64/gcc-linaro-aarch64-linux-gnu-4.9-.07_linux/bin:$PATH ../readline-7.0/configure --host=aarch64-linux-gnu \
--prefix=`pwd` make -j4
make install

termcap

termcap编译稍微麻烦一点，需要手动修改configure生成的Makefile文件。

解压：

tar -xf termcap-1.3..tar.gz
mkdir aarch64
cd aarch64

配置 mk1_conf.sh：

#!/bin/bash export PATH=/home/pengdonglin/src/qemu/aarch64/gcc-linaro-aarch64-linux-gnu-4.9-.07_linux/bin:$PATH ../termcap-1.3./configure --host=aarch64-linux-gnu \
--prefix=`pwd`

修改Makefile：

--- Makefile.orgin -- ::24.557379472 +
+++ Makefile -- ::32.749379210 +
@@ -, +, @@
srcdir = ../termcap-1.3.
VPATH = ../termcap-1.3. -CC = gcc
-AR = ar
-RANLIB = ranlib
+cross_compile = aarch64-linux-gnu-
+
+CC = ${cross_compile}gcc
+AR = ${cross_compile}ar
+RANLIB = ${cross_compile}ranlib INSTALL = /usr/bin/install -c
INSTALL_DATA = ${INSTALL} -m

即需要手动将修改工具链。

编译安装 mk2_make.sh：

#!/bin/bash export PATH=/home/pengdonglin/src/qemu/aarch64/gcc-linaro-aarch64-linux-gnu-4.9-.07_linux/bin:$PATH make -j4
make install

3、配置Python3

修改mk1_conf.sh，增加readline和termcap的lib和include路径

#!/bin/bash export PATH=/home/pengdonglin/src/qemu/aarch64/gcc-linaro-aarch64-linux-gnu-4.9-.07_linux/bin:$PATH ../Python-3.6./configure \
--host=aarch64-linux-gnu \
--build=aarch64 \
--prefix=`pwd` \
--enable-ipv6 \
--enable-shared \
ac_cv_file__dev_ptmx="yes" \
ac_cv_file__dev_ptc="no" \
LDFLAGS="-L/home/pengdonglin/src/qemu/python_cross_compile/SQlite/aarch64/lib \
-L/home/pengdonglin/src/qemu/python_cross_compile/Readline/aarch64/lib \
-L/home/pengdonglin/src/qemu/python_cross_compile/Termcap/aarch64/lib" \
CPPFLAGS="-I/home/pengdonglin/src/qemu/python_cross_compile/SQlite/aarch64/include \
-I/home/pengdonglin/src/qemu/python_cross_compile/Readline/aarch64/include \
-I/home/pengdonglin/src/qemu/python_cross_compile/Termcap/aarch64/include"

修改完成之后，执行mk1_conf.sh

修改该Module/Setup文件

--- Setup.origin -- ::52.609370903 +
+++ Setup -- ::46.781457397 +
@@ -, +, @@
# it, depending on your system -- see the GNU readline instructions.
# It's okay for this to be a shared library, too. -#readline readline.c -lreadline -ltermcap
+readline readline.c -lreadline -ltermcap # Modules that should always be present (non UNIX dependent)

即将readline这一行取消注释

编译安装 mk2_make.sh

#!/bin/bash export PATH=/home/pengdonglin/src/qemu/aarch64/gcc-linaro-aarch64-linux-gnu-4.9-.07_linux/bin:$PATH make -j4
make install

4、配置Python2

Python2跟Python3的处理方法稍有不同。

修改mk1_conf.sh，增加readline和termcap的lib和include路径

#!/bin/bash export PATH=/home/pengdonglin/src/qemu/aarch32/arm-2014.05/bin:$PATH ../Python-2.7./configure --prefix=`pwd` \
--host=arm-none-linux-gnueabi \
--build=x86_64-linux-gnu \
--enable-ipv6 \
--enable-shared \
ac_cv_file__dev_ptmx="yes" \
ac_cv_file__dev_ptc="no" \
LDFLAGS="-L/home/pengdonglin/src/qemu/python_cross_compile/SQlite/aarch32/lib \
-L/home/pengdonglin/src/qemu/python_cross_compile/Readline/aarch32/lib \
-L/home/pengdonglin/src/qemu/python_cross_compile/Termcap/aarch32/lib" \
CPPFLAGS="-I/home/pengdonglin/src/qemu/python_cross_compile/SQlite/aarch32/include \
-I/home/pengdonglin/src/qemu/python_cross_compile/Readline/aarch32/include \
-I/home/pengdonglin/src/qemu/python_cross_compile/Termcap/aarch32/include" \
LDLAST="-L/home/pengdonglin/src/qemu/python_cross_compile/Readline/aarch32/lib \
-L/home/pengdonglin/src/qemu/python_cross_compile/Termcap/aarch32/lib"

跟Python3一样，添加readline和termcap的include和lib路径，此外，还需要手动修改LDLAST的值，将readline和termcap的lib的路径添加到其中，否则在编译的时候会提示找不到l-lreadline和-ltermcap，然后执行./mk1_conf.sh

修改Modules/Setup

--- Setup.orig -- ::37.121275501 +
+++ Setup -- ::11.845441252 +
@@ -, +, @@
# it, depending on your system -- see the GNU readline instructions.
# It's okay for this to be a shared library, too. -#readline readline.c -lreadline -ltermcap
+readline readline.c -lreadline -ltermcap # Modules that should always be present (non UNIX dependent):

编译 mk2_make.sh

#!/bin/bash export PATH=/home/pengdonglin/src/qemu/aarch64/gcc-linaro-aarch64-linux-gnu-4.9-.07_linux/bin:$PATH make HOSTPYTHON=../x86_64/python \
HOSTPGEN=../x86_64/Parser/pgen \
BLDSHARED="aarch64-linux-gnu-gcc -shared" \
CROSS_COMPILE=aarch64-linux-gnu- \
CROSS_COMPILE_TARGET=yes \
HOSTARCH=aarch64-linux-gnu \
BUILDARCH=x86_64-linux-gnu \
-j4

安装 mk3_install.sh

#!/bin/bash export PATH=/home/pengdonglin/src/qemu/aarch64/gcc-linaro-aarch64-linux-gnu-4.9-.07_linux/bin:$PATH make install HOSTPYTHON=../x86_64/python \
BLDSHARED="aarch64-linux-gnu-gcc -shared" \
CROSS_COMPILE=arm-none-linux-gnueabi- \
CROSS_COMPILE_TARGET=yes \
prefix=`pwd`

5、修改制作ramdisk的脚本 mk_ramdisk.sh

#!/bin/bash export PATH=/home/pengdonglin/src/qemu/aarch64/gcc-linaro-aarch64-linux-gnu-4.9-.07_linux/bin:$PATH sudo rm -rf rootfs
sudo rm -rf tmpfs
sudo rm -rf ramdisk* sudo mkdir rootfs
sudo cp ../busybox-1.24./_install/* rootfs/ -raf sudo mkdir -p rootfs/proc/
sudo mkdir -p rootfs/sys/
sudo mkdir -p rootfs/tmp/
sudo mkdir -p rootfs/root/
sudo mkdir -p rootfs/var/
sudo mkdir -p rootfs/mnt/ sudo cp etc rootfs/ -arf
sudo mkdir -p rootfs/lib sudo cp -arf ../gcc-linaro-aarch64-linux-gnu-4.9-2014.07_linux/aarch64-linux-gnu/libc/lib/aarch64-linux-gnu/* rootfs/lib/ #python
version=3
sudo mkdir -p rootfs/usr
pushd rootfs/usr
sudo cp -raf /home/pengdonglin/src/qemu/python_cross_compile/Python${version}/aarch64/lib .
sudo cp -raf /home/pengdonglin/src/qemu/python_cross_compile/Python${version}/aarch64/include .
sudo cp -raf /home/pengdonglin/src/qemu/python_cross_compile/Python${version}/aarch64/bin .
sudo cp -raf /home/pengdonglin/src/qemu/python_cross_compile/Python${version}/aarch64/share .
sudo aarch64-linux-gnu-strip lib/python*
popd version=2
pushd rootfs/usr
sudo cp -raf /home/pengdonglin/src/qemu/python_cross_compile/Python${version}/aarch64/lib .
sudo cp -raf /home/pengdonglin/src/qemu/python_cross_compile/Python${version}/aarch64/include .
sudo cp -raf /home/pengdonglin/src/qemu/python_cross_compile/Python${version}/aarch64/bin .
sudo cp -raf /home/pengdonglin/src/qemu/python_cross_compile/Python${version}/aarch64/share .
sudo aarch64-linux-gnu-strip lib/python*
popd #sqlite
sudo cp -raf /home/pengdonglin/src/qemu/python_cross_compile/SQlite/aarch64/bin/* rootfs/bin/
sudo cp -raf /home/pengdonglin/src/qemu/python_cross_compile/SQlite/aarch64/include/* rootfs/include/
sudo cp -raf /home/pengdonglin/src/qemu/python_cross_compile/SQlite/aarch64/lib/* rootfs/lib/
sudo strip rootfs/bin/sqlite3 #readline
sudo cp -raf /home/pengdonglin/src/qemu/python_cross_compile/Readline/aarch64/include/* rootfs/include/
sudo cp -raf /home/pengdonglin/src/qemu/python_cross_compile/Readline/aarch64/lib/* rootfs/lib/ sudo mkdir -p rootfs/dev/
sudo mknod rootfs/dev/tty1 c 4 1
sudo mknod rootfs/dev/tty2 c 4 2
sudo mknod rootfs/dev/tty3 c 4 3
sudo mknod rootfs/dev/tty4 c 4 4
sudo mknod rootfs/dev/console c 5 1
sudo mknod rootfs/dev/null c 1 3 sudo rm rootfs/lib/*.a
sudo rm rootfs/lib/*.la
sudo aarch64-linux-gnu-strip rootfs/lib/* sudo mkdir -p rootfs/lib/modules/4\.10\.0\+ pushd rootfs/lib
sudo ln -sf ld-2.19-2014.07.so ld-linux-aarch64.so.1
popd sudo mkdir -p rootfs/tools
sudo cp ./other_tools/* rootfs/tools sudo dd if=/dev/zero of=ramdisk bs=1M count=300
sudo mkfs.ext4 -F ramdisk sudo mkdir -p tmpfs
sudo mount -t ext4 ramdisk ./tmpfs/ -o loop
sudo cp -raf rootfs/* tmpfs/
sudo umount tmpfs sudo gzip --best -c ramdisk > ramdisk.gz
sudo mkimage -n "ramdisk" -A arm -O linux -T ramdisk -C gzip -d ramdisk.gz ramdisk.img