Python 基礎 - 列表的使用

如果想要存所有 Marvel's The Avengers 角色的人名，該如何存呢？請用目前已學到的知識來實做…

#!/usr/bin/env python3
# -*- coding:utf-8 -*-names = "Rogers Stark Thor Loki Natasha"


目前已存了五個人，透過空白來區分(也可以用逗號)，但該如何去取某一個人的值！？因為咱們已經把這五個人的人名存在一個變量裡了，所以沒辦法取，除非…可以像 Shell Script 透過 sed or awk 去做區分(喂~不能這樣做)，想改也沒辦法改，實務上，我們想存很多的訊息，並且透過字符串來存，就面臨了二個問題，一是不好存，二是不好改，所以後來發展出了新的數據類型，就叫 列表，在 Python 裡，使用列表時，就請用 [](中括號)。

#!/usr/bin/env python3
# -*- coding:utf-8 -*-names = "Rogers Stark Thor Loki Natasha"
names = []print(names)---------------執行結果---------------
[]Process finished with exit code 0


這樣就打印出來一個空的列表，接下來把剛剛的人名給存在這列表裡吧…

#!/usr/bin/env python3
# -*- coding:utf-8 -*-names = "Rogers Stark Thor Loki Natasha"
names = ["Rogers", "Stark", "Thor", "Loki", "Natasha"]print(names)---------------執行結果---------------['Rogers', 'Stark', 'Thor', 'Loki', 'Natasha']Process finished with exit code 0


這樣就把人名存進去了，接下來我們來取其中一個人名好了，抓 Rogers好了，該怎麼取呢？

#!/usr/bin/env python3
# -*- coding:utf-8 -*-names = "Rogers Stark Thor Loki Natasha"
names = ["Rogers", "Stark", "Thor", "Loki", "Natasha"]print(names["Rogers"])---------------執行結果---------------Traceback (most recent call last):
File "/Users/ironman/python/names.py", line 7, in <module>
print(names["Rogers"])
TypeError: list indices must be integers or slices, not strProcess finished with exit code 1


結果發現報錯 TypeError: list indices must be integers or slices, not str，是因為不能這樣取值的，正確取值應該是…

#!/usr/bin/env python3
# -*- coding:utf-8 -*-names = "Rogers Stark Thor Loki Natasha"
names = ["Rogers", "Stark", "Thor", "Loki", "Natasha"]print(names[0])---------------執行結果---------------RogersProcess finished with exit code 0


這樣就取出來了，但為什麼會是0呢？ 0就代表 Rogers在這個列表中，從左到右開始的第一個位置，但在電腦存數據時，不是從1開始算的，是從0開始算起的，因為二進制使用的第一個狀態就是0，所以從0開始算的，因此，我們可以透過位置來取得相對應的值。

#!/usr/bin/env python3
# -*- coding:utf-8 -*-names = "Rogers Stark Thor Loki Natasha"
names = ["Rogers", "Stark", "Thor", "Loki", "Natasha"]print(names[0], names[1])---------------執行結果---------------Rogers StarkProcess finished with exit code 0


接下來有沒有辦法一次就把 Stark 跟 Thor 給取出來？

#!/usr/bin/env python3
# -*- coding:utf-8 -*-names = "Rogers Stark Thor Loki Natasha"
names = ["Rogers", "Stark", "Thor", "Loki", "Natasha"]print(names[0], names[1])
print(names[1:2])---------------執行結果---------------Rogers Stark
['Stark']Process finished with exit code 0


咦~怎麼只出現 Stark ？那在往後取一位試試…

#!/usr/bin/env python3
# -*- coding:utf-8 -*-names = "Rogers Stark Thor Loki Natasha"
names = ["Rogers", "Stark", "Thor", "Loki", "Natasha"]print(names[0], names[1])
print(names[1:3])---------------執行結果---------------Rogers Stark
['Stark', 'Thor']Process finished with exit code 0


哦…這樣就取出來正確的了，那有沒有發現一個問題，就是只有顧到(包括) 起始位置，而沒有顧到(不包括) 結束位置 ，所以我們叫這個是 顧頭不顧尾 ，如果你要取的位置是連續的就可以用這個方式，而這個方式就叫做 slices(切片)。

假設今天我有一個很長的列表，不知道有幾個，但想取最後一個，該怎麼取呢？我們依上面的代碼，先取出最後一個值

#!/usr/bin/env python3
# -*- coding:utf-8 -*-names = "Rogers Stark Thor Loki Natasha"
names = ["Rogers", "Stark", "Thor", "Loki", "Natasha"]print(names[0], names[1])
print(names[1:3])
print(names[4]) # 在已知可數的情況下，就是我們一般取最後一個值的用法---------------執行結果---------------Rogers Stark
['Stark', 'Thor']
NatashaProcess finished with exit code 0


在不可數的情況下，也是一般較常用的寫法是

#!/usr/bin/env python3
# -*- coding:utf-8 -*-names = "Rogers Stark Thor Loki Natasha"
names = ["Rogers", "Stark", "Thor", "Loki", "Natasha"]print(names[0], names[1])
print(names[1:3])
print(names[4])
print(names[-1])---------------執行結果---------------Rogers Stark
['Stark', 'Thor']
Natasha
NatashaProcess finished with exit code 0


正的就是從左到右取值，負的就是從右到左取值，那如果接下想要取一次取最後二個值，該怎麼取呢？

#!/usr/bin/env python3
# -*- coding:utf-8 -*-names = "Rogers Stark Thor Loki Natasha"
names = ["Rogers", "Stark", "Thor", "Loki", "Natasha"]print(names)
print(names[-1:-3])---------------執行結果---------------['Rogers', 'Stark', 'Thor', 'Loki', 'Natasha']
[]Process finished with exit code 0


為什麼取出空列表哩，主要是因為 切片還是一樣是 從左往右數來取得數值的，所以我們應該要寫成-3開始取值

#!/usr/bin/env python3
# -*- coding:utf-8 -*-names = "Rogers Stark Thor Loki Natasha"
names = ["Rogers", "Stark", "Thor", "Loki", "Natasha"]print(names)
print(names[-3:-1])---------------執行結果---------------['Rogers', 'Stark', 'Thor', 'Loki', 'Natasha']
['Thor', 'Loki']Process finished with exit code 0


又不對了，別忘記了，切片取值是顧頭不顧尾， 所以才會取出 Thor 跟 Loki，那在修改一下，參考下圖說明

#!/usr/bin/env python3
# -*- coding:utf-8 -*-names = "Rogers Stark Thor Loki Natasha"
names = ["Rogers", "Stark", "Thor", "Loki", "Natasha"]print(names)
print(names[-2:-1])---------------執行結果---------------['Rogers', 'Stark', 'Thor', 'Loki', 'Natasha']
['Loki']Process finished with exit code 0


又不對了，因為 切片是顧頭不顧尾，但又想取最後一個值，又該怎麼辦？

#!/usr/bin/env python3
# -*- coding:utf-8 -*-names = "Rogers Stark Thor Loki Natasha"
names = ["Rogers", "Stark", "Thor", "Loki", "Natasha"]print(names)
print(names[-2:])---------------執行結果---------------['Rogers', 'Stark', 'Thor', 'Loki', 'Natasha']
['Loki', 'Natasha']Process finished with exit code 0


這樣就取到，有發現嗎？如果要取最後一個數值，其實 省略不打就可以取到了，那如果要正取0到3，同樣的也是可以省略0，代碼寫法如下

#!/usr/bin/env python3
# -*- coding:utf-8 -*-names = "Rogers Stark Thor Loki Natasha"
names = ["Rogers", "Stark", "Thor", "Loki", "Natasha"]print(names)
print(names[:3])---------------執行結果---------------['Rogers', 'Stark', 'Thor', 'Loki', 'Natasha']
['Rogers', 'Stark', 'Thor']Process finished with exit code 0


接下來那我們又想要多加入一個人，該怎麼寫呢？

#!/usr/bin/env python3
# -*- coding:utf-8 -*-names = "Rogers Stark Thor Loki Natasha"
names = ["Rogers", "Stark", "Thor", "Loki", "Natasha"]
names.append("Barton")print(names)---------------執行結果---------------['Rogers', 'Stark', 'Thor', 'Loki', 'Natasha', 'Barton']Process finished with exit code 0


append() 意思就是附加，而且是加在最後面的，那如果想要隨意放在列表的任一位置呢？

#!/usr/bin/env python3
# -*- coding:utf-8 -*-names = "Rogers Stark Thor Loki Natasha"
names = ["Rogers", "Stark", "Thor", "Loki", "Natasha"]
names.append("Barton")
names.insert(1, "Coulson")print(names)---------------執行結果---------------['Rogers', 'Coulson', 'Stark', 'Thor', 'Loki', 'Natasha', 'Barton']Process finished with exit code 0


insert() 就是插入任意你想要插入的位置，依上例代碼來說，就是要把 Coulson 插入到 Stark 前面，因此，填入的數字就 1，這樣就會插入在 Stark 前了，那如果要在新增一個人，到 Stark後面，又要怎麼寫呢？

#!/usr/bin/env python3
# -*- coding:utf-8 -*-names = "Rogers Stark Thor Loki Natasha"
names = ["Rogers", "Stark", "Thor", "Loki", "Natasha"]
names.append("Barton")
names.insert(1, "Coulson")
names.insert(3, "Fury")print(names)---------------執行結果---------------['Rogers', 'Coulson', 'Stark', 'Fury', 'Thor', 'Loki', 'Natasha', 'Barton']Process finished with exit code 0


那要怎麼列表中的人名做取代的呢？

#!/usr/bin/env python3
# -*- coding:utf-8 -*-names = "Rogers Stark Thor Loki Natasha"
names = ["Rogers", "Stark", "Thor", "Loki", "Natasha"]
names.append("Barton")
names.insert(1, "Coulson")
names.insert(3, "Fury")
names[2] = "Bruce"print(names)---------------執行結果---------------['Rogers', 'Coulson', 'Bruce', 'Fury', 'Thor', 'Loki', 'Natasha', 'Barton']Process finished with exit code 0


有發現了嘛， Stark 被取代成 Bruce了，這就是取代，那再來要怎麼刪除人名嗎？總共三種方法，這次刪除都以位置為 1 的 Coulson 做示範

#!/usr/bin/env python3
# -*- coding:utf-8 -*-names = "Rogers Stark Thor Loki Natasha"
names = ["Rogers", "Stark", "Thor", "Loki", "Natasha"]
names.append("Barton")
names.insert(1, "Coulson")
names.insert(3, "Fury")
names[2] = "Bruce"print(names)# delete methods# 1. names.remove("Coulson")# 2. del names[1] = names.pop(1)# 3. names.pop(1)names.pop(1)print(names)---------------執行結果---------------['Rogers', 'Coulson', 'Bruce', 'Fury', 'Thor', 'Loki', 'Natasha', 'Barton']
['Rogers', 'Bruce', 'Fury', 'Thor', 'Loki', 'Natasha', 'Barton']Process finished with exit code 0


這三個方法都可以用來刪除，其中要特別說明的就是 pop() 這個刪除是最後一個，請看下圖跟代碼

#!/usr/bin/env python3
# -*- coding:utf-8 -*-names = "Rogers Stark Thor Loki Natasha"
names = ["Rogers", "Stark", "Thor", "Loki", "Natasha"]
names.append("Barton")
names.insert(1, "Coulson")
names.insert(3, "Fury")
names[2] = "Bruce"print(names)names.pop()print(names)---------------執行結果---------------['Rogers', 'Coulson', 'Bruce', 'Fury', 'Thor', 'Loki', 'Natasha', 'Barton']
['Rogers', 'Coulson', 'Bruce', 'Fury', 'Thor', 'Loki', 'Natasha']Process finished with exit code 0


那如果要在列表中，尋找特定的一個人名是在哪一個位置，那該怎麼找呢？這次我們來找 Loki 好了

#!/usr/bin/env python3
# -*- coding:utf-8 -*-names = "Rogers Stark Thor Loki Natasha"
names = ["Rogers", "Stark", "Thor", "Loki", "Natasha"]
names.append("Barton")
names.insert(1, "Coulson")
names.insert(3, "Fury")
names[2] = "Bruce"print(names)
print(names.index("Loki"))---------------執行結果---------------['Rogers', 'Coulson', 'Bruce', 'Fury', 'Thor', 'Loki', 'Natasha', 'Barton']
5Process finished with exit code 0


嗯，找到了，但如果我想找出位置後，並打印出相對應的值，該怎麼寫？

#!/usr/bin/env python3
# -*- coding:utf-8 -*-names = "Rogers Stark Thor Loki Natasha"
names = ["Rogers", "Stark", "Thor", "Loki", "Natasha"]
names.append("Barton")
names.insert(1, "Coulson")
names.insert(3, "Fury")
names[2] = "Bruce"print(names)
print(names.index("Loki"))
print( names[names.index("Loki")] )---------------執行結果---------------['Rogers', 'Coulson', 'Bruce', 'Fury', 'Thor', 'Loki', 'Natasha', 'Barton']
5
LokiProcess finished with exit code 0


那如何在列表中，查詢有相同人名的有幾個？

#!/usr/bin/env python3
# -*- coding:utf-8 -*-names = "Rogers Stark Thor Loki Natasha"
names = ["Rogers", "Stark", "Thor", "Loki", "Natasha", "Coulson"]
names.append("Barton")
names.insert(1, "Coulson")
names.insert(3, "Fury")
names[2] = "Bruce"print(names)
print(names.count("Coulson"))---------------執行結果---------------['Rogers', 'Coulson', 'Bruce', 'Fury', 'Thor', 'Loki', 'Natasha', 'Coulson', 'Barton']
2Process finished with exit code 0