Linux I2C驱动

提示：扫一扫查出行
【扫一扫了解最新限行尾号】
复制提示

Linux I2C 驱动结构

i2c体系结构由三部分组成

i2C core

i2c core提供了i2c 总线驱动和设备驱动的注册，注销方法

i2C and SMBus protocol 实现
i2C “bus” driver

algorithm driver

adapter driver
i2c device driver

chip drivers, 包括多种类型，如RTC, EEPROM, I/O expander, hardware monitoring, sound, video等

i2c adapter 和 i2C algorithm

i2c adapter对应于物理上的适配器。 i2C algorithm对应一套通信方法。

i2c 设备驱动

i2c 设备驱动要使用i2c_driver 和i2c_client数据结构并填充i2c_driver中的成员函数

/**

 * struct i2c_driver - represent an I2C device driver

 * @class: What kind of i2c device we instantiate (for detect)

 * @attach_adapter: Callback for bus addition (deprecated)

 * @probe: Callback for device binding - soon to be deprecated

 * @probe_new: New callback for device binding

 * @remove: Callback for device unbinding

 * @shutdown: Callback for device shutdown

 * @alert: Alert callback, for example for the SMBus alert protocol

 * @command: Callback for bus-wide signaling (optional)

 * @driver: Device driver model driver

 * @id_table: List of I2C devices supported by this driver

 * @detect: Callback for device detection

 * @address_list: The I2C addresses to probe (for detect)

 * @clients: List of detected clients we created (for i2c-core use only)

 * @disable_i2c_core_irq_mapping: Tell the i2c-core to not do irq-mapping

 *

 * The driver.owner field should be set to the module owner of this driver.

 * The driver.name field should be set to the name of this driver.

 *

 * For automatic device detection, both @detect and @address_list must

 * be defined. @class should also be set, otherwise only devices forced

 * with module parameters will be created. The detect function must

 * fill at least the name field of the i2c_board_info structure it is

 * handed upon successful detection, and possibly also the flags field.

 *

 * If @detect is missing, the driver will still work fine for enumerated

 * devices. Detected devices simply won't be supported. This is expected

 * for the many I2C/SMBus devices which can't be detected reliably, and

 * the ones which can always be enumerated in practice.

 *

 * The i2c_client structure which is handed to the @detect callback is

 * not a real i2c_client. It is initialized just enough so that you can

 * call i2c_smbus_read_byte_data and friends on it. Don't do anything

 * else with it. In particular, calling dev_dbg and friends on it is

 * not allowed.

 */

struct i2c_driver {

    unsigned int class;

    /* Notifies the driver that a new bus has appeared. You should avoid

     * using this, it will be removed in a near future.

     */

    int (*attach_adapter)(struct i2c_adapter *) __deprecated;

    /* Standard driver model interfaces */

    int (*probe)(struct i2c_client *, const struct i2c_device_id *);

    int (*remove)(struct i2c_client *);

    /* New driver model interface to aid the seamless removal of the

     * current probe()'s, more commonly unused than used second parameter.

     */

    int (*probe_new)(struct i2c_client *);

    /* driver model interfaces that don't relate to enumeration  */

    void (*shutdown)(struct i2c_client *);

    /* Alert callback, for example for the SMBus alert protocol.

     * The format and meaning of the data value depends on the protocol.

     * For the SMBus alert protocol, there is a single bit of data passed

     * as the alert response's low bit ("event flag").

     * For the SMBus Host Notify protocol, the data corresponds to the

     * 16-bit payload data reported by the slave device acting as master.

     */

    void (*alert)(struct i2c_client *, enum i2c_alert_protocol protocol,

              unsigned int data);

    /* a ioctl like command that can be used to perform specific functions

     * with the device.

     */

    int (*command)(struct i2c_client *client, unsigned int cmd, void *arg);

    struct device_driver driver;

    const struct i2c_device_id *id_table;

    /* Device detection callback for automatic device creation */

    int (*detect)(struct i2c_client *, struct i2c_board_info *);

    const unsigned short *address_list;

    struct list_head clients;

    bool disable_i2c_core_irq_mapping;

};

看一下RTC设备的驱动

Browse the source code of linux/drivers/rtc/rtc-ds1307.c

static struct i2c_driver ds1307_driver = {

    .driver = {

        .name   = "rtc-ds1307",

        .of_match_table = of_match_ptr(ds1307_of_match),

        .acpi_match_table = ACPI_PTR(ds1307_acpi_ids),

    },

    .probe      = ds1307_probe,

    .id_table   = ds1307_id,

};