Ubuntu安装FreeSWITCH亲测

wget http://files.freeswitch.org/freeswitch-releases/freeswitch-1.8.5.tar.xz
xz -d freeswitch-1.8.5.tar.xz
tar -xvf freeswitch-1.8.5.tar

apt-get updateapt-get install -y autoconf git libtool g++ zlib1g-dev libjpeg-dev libsqlite3-dev libcurl4-openssl-dev libpcre3-dev libspeex-dev libspeexdsp-dev libldns-dev libedit-dev libssl-dev pkg-config yasm liblua50-dev libopus-dev libsndfile1-dev libpq-dev libreadline-dev lua5.2 lua5.2-doc liblua5.2-dev libtiff5 libtiff5-devsudo apt-get install -y vim
sudo apt-get install -y g++
sudo apt-get install -y zlib1g-dev
sudo apt-get install -y libjpeg-dev
sudo apt-get install -y libsqlite3-dev
sudo apt-get install -y libcurl4-gnutls-dev
sudo apt-get install -y libpcre3-dev
sudo apt-get install -y libspeexdsp-dev
sudo apt-get install -y libedit-dev
sudo apt-get install -y libssl-dev
sudo apt-get install -y libopus-dev
sudo apt-get install -y liblua5.2-dev
sudo apt-get install -y libldns-dev
sudo apt-get install -y libsndfile1-dev

# 切换路径到第一步解压缩的文件夹下
./configuremake
make install

# 安装声音文件
make sounds-install
make moh-install# 以下高质量的声音文件可选择安装
make cd-sounds-install
make cd-moh-install

ln -sf /usr/local/freeswitch/bin/freeswitch /usr/bin/
ln -sf /usr/local/freeswitch/bin/fs_cli /usr/bin/

freeswitch

shutdown

make[4]: Entering directory '/home/root/code/freeswitch-1.8.5/src/mod/applications/mod_signalwire'
Makefile:930: *** You must install libks to build mod_signalwire. Stop.
make[4]: Leaving directory '/home/root/code/freeswitch-1.8.5/src/mod/applications/mod_signalwire'
Makefile:683: recipe for target 'mod_signalwire-all' failed
make[3]: *** [mod_signalwire-all] Error 1
make[3]: Leaving directory '/home/root/code/freeswitch-1.8.5/src/mod'
Makefile:591: recipe for target 'all-recursive' failed
make[2]: *** [all-recursive] Error 1
make[2]: Leaving directory '/home/root/code/freeswitch-1.8.5/src'
Makefile:3494: recipe for target 'all-recursive' failed
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory '/home/root/code/freeswitch-1.8.5'
Makefile:1255: recipe for target 'all' failed
make: *** [all] Error 2

# 下载并编译libks
cd /usr/local/src
git clone https://github.com/signalwire/libks.git
cd libks
cmake .

-- Checking for module 'uuid'
-- No package 'uuid' found
CMake Error at /home/root/tools/cmake-3.13.3-Linux-x86_64/share/cmake-3.13/Modules/FindPkgConfig.cmake:452 (message):
A required package was not found
Call Stack (most recent call first):
/home/root/tools/cmake-3.13.3-Linux-x86_64/share/cmake-3.13/Modules/FindPkgConfig.cmake:622 (_pkg_check_modules_internal)
cmake/FindUUID.cmake:15 (pkg_check_modules)
CMakeLists.txt:294 (include)-- Configuring incomplete, errors occurred!
See also "/home/root/code/libks/CMakeFiles/CMakeOutput.log".
See also "/home/root/code/libks/CMakeFiles/CMakeError.log".

# 解决方法：下载并编译libuuid源码
wget https://jaist.dl.sourceforge.net/project/libuuid/libuuid-1.0.3.tar.gz
tar -zxvf libuuid-1.0.3.tar.gz
cd libuuid-1.0.3
./configure
make
make install
# 重新执行libks的
cmake .
#### 问题解决。然后执行libks的
make
make install

make[]: Entering directory '/home/root/code/freeswitch-1.8.5/src/mod/applications/mod_signalwire'
Makefile:: *** You must install signalwireto build mod_signalwire. Stop.
make[]: Leaving directory '/home/root/code/freeswitch-1.8.5/src/mod/applications/mod_signalwire'
Makefile:: recipe for target 'mod_signalwire-all' failed
make[]: *** [mod_signalwire-all] Error
make[]: Leaving directory '/home/root/code/freeswitch-1.8.5/src/mod'
Makefile:: recipe for target 'all-recursive' failed
make[]: *** [all-recursive] Error
make[]: Leaving directory '/home/root/code/freeswitch-1.8.5/src'
Makefile:: recipe for target 'all-recursive' failed
make[]: *** [all-recursive] Error
make[]: Leaving directory '/home/root/code/freeswitch-1.8.5'
Makefile:: recipe for target 'all' failed
make: *** [all] Error

# 解决方法：下载并编译signalwire-c
cd /usr/local/src
git clone https://github.com/signalwire/signalwire-c.git
cd signalwire-c
cmake .
make
make install

CMake Error at CMakeLists.txt:168 (string):
string sub-command REPLACE requires at least four arguments.-- Configuring incomplete, errors occurred!
See also "/home/root/code/signalwire-c/CMakeFiles/CMakeOutput.log".

# 阅读CMakeLists.txt，发现出问题的地方是使用git命令生成changelog的。对编译代码无影响。注释掉相关内容：# Get git log info
#execute_process(COMMAND ${GIT_EXECUTABLE} log --no-merges --pretty=format:"%n [%an]%n * %s" --since="last month"
# OUTPUT_VARIABLE CHANGELOG
# WORKING_DIRECTORY .
# OUTPUT_STRIP_TRAILING_WHITESPACE)
#string(REPLACE "\"" "" CHANGELOG ${CHANGELOG})## Create changelog
#file(WRITE changelog.Debian ${CHANGELOG_HEADER}\n${CHANGELOG}\n\n${CHANGELOG_FOOTER})
#execute_process(COMMAND ${GZIP_CMD} -f -9 -n changelog.Debian)# Install changelog
#install(FILES "${CMAKE_BINARY_DIR}/changelog.Debian.gz" COMPONENT "runtime" DESTINATION "share/doc/${CPACK_DEBIAN_PACKAGE_NAME}")# 在signalwire下重新执行
cmake .
make
make install

make clean # 清除上次编译的中间文件# 重新执行FreeSWITCH的
./configure
make
make install

'''
[ERR] mod_local_stream.c:360 Can't open /usr/local/freeswitch/sounds/music/8000/danza-espanola-op-37-h-142-xii-arabesca.wav
[ERR] switch_core_file.c:304 Invalid file format [wav] for [/usr/local/freeswitch/sounds/music/8000/partita-no-3-in-e-major-bwv-1006-1-preludio.wav]!
[ERR] mod_local_stream.c:360 Can't open /usr/local/freeswitch/sounds/music/8000/partita-no-3-in-e-major-bwv-1006-1-preludio.wav
.........................
.........................
'''