cenots7单机安装Kubernetes

提示：扫一扫查出行
【扫一扫了解最新限行尾号】
复制提示

关于什么是Kubernetes请看另一篇内容：http://www.cnblogs.com/boshen-hzb/p/6482734.html

一、环境搭建

master安装的组件有：

docker
etcd 可以理解为是k8s的数据库，存储所有节点、pods、网络信息
kube-proxy 提供service服务的基础组件
kubelet 管理k8s节点的组件，因为这台master同时也是nodes，所以也要安装
kube-apiserver k8s提供API的接口，是整个k8s的核心
kube-controller-manager 管理分配资源的组件
kube-scheduler 调度资源的组件
flanneld 整个k8s的网络组件

nodes安装的组件有：

docker
kube-proxy
kubelet
flanneld

由于是单机安装，所以只需要安装master节点就可以。

二、安装步骤

1、关闭防火墙

systemctl stop firewalld.service

systemctl disable firewalld.service

2、更新yum源

cat <<EOF> /etc/yum.repos.d/virt7-docker-common-release.repo
[virt7-docker-common-release]
name=virt7-docker-common-release
baseurl=http://cbs.centos.org/repos/virt7-docker-common-release/x86_64/os/
gpgcheck=0
EOF

3、执行yum -y update

4、执行安装命令

yum install -y etcd kubernetes flannel

如果系统已经存在安装好的docker引擎，上面的命令会报错，解决方法就是：先删除掉docker，因为上面的命令当中，会自动安装docker

5、配置etcd服务器

/etc/etcd/etcd.conf

# [member]
ETCD_NAME=default
ETCD_DATA_DIR="/var/lib/etcd/default.etcd"
ETCD_LISTEN_CLIENT_URLS="http://localhost:2379,http://10.111.131.51:2379"
ETCD_ADVERTISE_CLIENT_URLS="http://10.111.131.51:2379"

启动服务 systemctl start etcd systemctl enable etcd

检查etcd cluster状态

[root@localhost ~]# etcdctl cluster-health
member eb1f405cbdb8358 is healthy: got healthy result from http://localhost:2379
cluster is healthy
[root@localhost ~]#

检查etcd集群成员列表，这里只有一台

[root@localhost ~]# etcdctl member list
eb1f405cbdb8358: name=default peerURLs=http://10.111.131.51:2380 clientURLs=http://localhost:2379 isLeader=true
[root@localhost ~]

配置防火墙 firewall-cmd --zone=public --add-port=2379/tcp --permanent firewall-cmd --zone=public --add-port=2380/tcp --permanent firewall-cmd --reload firewall-cmd --list-all

6、配置master服务器

1) 配置kube-apiserver配置文件

/etc/kubernetes/config

KUBE_LOGTOSTDERR="--logtostderr=true"# journal message level, 0 is debug
KUBE_LOG_LEVEL="--v=0"# Should this cluster be allowed to run privileged docker containers
KUBE_ALLOW_PRIV="--allow-privileged=false"# How the controller-manager, scheduler, and proxy find the apiserver
KUBE_MASTER="--master=http://10.111.131.51:8080"

/etc/kubernetes/apiserver

KUBE_API_ADDRESS="--insecure-bind-address=127.0.0.1"# The port on the local server to listen on.
# KUBE_API_PORT="--port=8080"# Port minions listen on
# KUBELET_PORT="--kubelet-port=10250"# Comma separated list of nodes in the etcd cluster
KUBE_ETCD_SERVERS="--etcd-servers=http://10.111.131.51:2379"# Address range to use for services
KUBE_SERVICE_ADDRESSES="--service-cluster-ip-range=10.254.0.0/16"# default admission control policies
KUBE_ADMISSION_CONTROL="--admission-control=NamespaceLifecycle,NamespaceExists,LimitRanger,SecurityContextDeny,ServiceAccount,ResourceQuota"# Add your own!
KUBE_API_ARGS=""

2) 配置kube-controller-manager配置文件

# The following values are used to configure the kubernetes controller-manager# defaults from config and apiserver should be adequate# Add your own!
KUBE_CONTROLLER_MANAGER_ARGS=""

3) 配置kube-scheduler配置文件
/etc/kubernetes/scheduler

###
# kubernetes scheduler config# default config should be adequate# Add your own!
KUBE_SCHEDULER_ARGS="--address=0.0.0.0"

4) 启动服务

service kube-apiserver restart

service kube-controller-manager restart

service kube-scheduler restart

以下是将本机当作node节点的配置

5)配置etcd

[root@localhost ~]# etcdctl set /k8s/network/config '{"Network": "10.111.131.0/24"}'
{"Network": "10.111.131.0/24"}
[root@localhost ~]#

6)配置node的network,本实例采用flannel方式来配置，如需其他方式，请参考Kubernetes官网。

先用ifconfig查找到本机网络10.111.131.51对应的网卡：

eno16777736: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 10.111.131.51 netmask 255.255.255.0 broadcast 10.111.131.255
inet6 fe80::20c:29ff:fedf:f83b prefixlen 64 scopeid 0x20<link>
ether 00:0c:29:df:f8:3b txqueuelen 1000 (Ethernet)
RX packets 161627 bytes 208913594 (199.2 MiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 113194 bytes 72446146 (69.0 MiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0

打开/etc/sysconfig/flanneld，进行以下配置

# Flanneld configuration options # etcd url location. Point this to the server where etcd runs
FLANNEL_ETCD_ENDPOINTS="http://10.111.131.51:2379"# etcd config key. This is the configuration key that flannel queries
# For address range assignment
FLANNEL_ETCD_PREFIX="/k8s/network"# Any additional options that you want to pass
FLANNEL_OPTIONS="eno16777736"

7）配置node的kube-proxy

/etc/kubernetes/config （注意：本机是master也是node，因为前面已经配过，所以这里不用再配）

/etc/kubernetes/proxy

进行以下配置

config should be adequate# Add your own!
KUBE_PROXY_ARGS="--bind=address=0.0.0.0"

8) 配置node的kubelet

在/etc/hosts下加入：10.111.131.51 k8s-master

/etc/kubernetes/kubelet

###
# kubernetes kubelet (minion) config# The address for the info server to serve on (set to 0.0.0.0 or "" for all interfaces)
KUBELET_ADDRESS="--address=127.0.0.1"# The port for the info server to serve on
# KUBELET_PORT="--port=10250"# You may leave this blank to use the actual hostname
KUBELET_HOSTNAME="--hostname-override=k8s-master"# location of the api-server
KUBELET_API_SERVER="--api-servers=http://10.111.131.51:8080"# pod infrastructure container
KUBELET_POD_INFRA_CONTAINER="--pod-infra-container-image=registry.access.redhat.com/rhel7/pod-infrastructure:latest"# Add your own!
KUBELET_ARGS=""

9) 启动node服务

service flanneld start

service kube-proxy start

service kubelet start

10)至此，整个Kubernetes单机版环境搭建完，下面创建一个deployment进行测试

mysql-deployment.yaml

apiVersion: extensions/v1beta1
kind: Deployment
metadata:
name: mysql-test
spec: replicas: 1
template:
metadata:
labels:
app: redis
spec:
containers:
- name: mysql-test
image: 72.16.101.192/common/mysql:5.6
resources:
requests:
cpu: 100m
memory: 100Mi
ports:
- containerPort: 3306