正文

如何用webgl(three.js)搭建一个3D库房,3D密集架,3D档案室（升级版）

IP云
IP云V管理员/4 阅读
08/11
提示：扫一扫查出行
【扫一扫了解最新限行尾号】
复制提示

很长一段时间没有写3D库房,3D密集架相关的效果文章了，刚好最近有相关项目落地，索性总结一下

与之前我写的3D库房密集架文章《如何用webgl(three.js)搭建一个3D库房,3D密集架,3D档案室,-第二课》相比，本次做了一些效果上的升级，以及更加贴合用户应用实际。

密集架库房再档案管理，土壤监测，标本存储等各个行业应用的比较多，从早期的货架到后来的手摇式密集架再到现在的全自动密集架，硬件上都做了升级改进。

在环境、安防监控这一块，密集架方案提供商也配套的加上了八方感知，视频监控，温湿度一体机，自动书架，智能门禁等各种设备。

这篇文章我们主要记录讲解使用webgl(three.js)实现3D可视化密集架方案以及实现代码。

闲话少叙，我们进入正题：

一、主库房功能效果，以及其特效实现代码

首先我们先看看库房效果以及当前实现的3d密集架的一些功能

1.1、主界面效果，这个库房分了6个区域，多个房间拐角，后面我们还会展示一些拐角房间的内部效果，那是一个虚拟展厅。效果如下：

1.2、选择点击密集架，可以看到当前密集架的一些统计信息，例如面数，层数，节数（列），还有利用率等。

对于全自动密集架，我们还可以通过协议对接，对密集架进行控制，开架，打开通道，合架等。效果如下：

实现方式：

移动密集架，合并密集架，重点，难点在于计算密集架移动距离，每次移动密集架的个数，以及记录当前密集架的位置

我才用的时分区计算，各个突破，通过配置文件的方式记录固定架，以及每个架子的有效移动方向

具体实现如下：

首先通过配置的方式，记录每个架子的初始态，对于一个库房来说，不用写逻辑代码，直接配置还是比较方便的

var shelfAreas = [[11, 23, 13, 11, 23, 13, 25, 17]];
//固定列编号
var areasFixedCol = [
[[ 1], [12], [13], [1], [12], [13], [13], [9]]
];
//左移方向
var leftMoveDirect = [
[["x", -1], ["x", -1], ["x", -1],
["x", -1], ["x", -1], ["x", -1],
["x", -1], ["x", -1]]];

然后再通过写通用方法，实现每个架子的移动与合并方案

//互斥移动 一次只能移动一个区域单边的架子
ModelBusiness.prototype.moveMjj = function (obj, dir, moveLength) {
var _this = this;
if (_this.moveState == 1) {
layer.msg("有架子移动中，请稍后");
return;
}
_this.moveState = 1;
var movemjjsParam = this.getNeedMoveMjjs(obj, dir);
/*
needMoveNubs: needMoveNubs,
needMoveMjjNames:needMoveMjjNames,
directStr: driStr,
directValue: directValue,
onlyCanMoveValue: onlyCanMoveValue
*/
if(movemjjsParam.directStr=="x"){
movemjjsParam.directStrLager="X";
}
if(movemjjsParam.directStr=="z"){
movemjjsParam.directStrLager="Z";
}
console.log(movemjjsParam); var moveMjjObjs = WT3DObj.commonFunc.findObjectsByNames(movemjjsParam.needMoveMjjNames);
var canMoveRealObjs = [];//真正能移动的架子
$.each(moveMjjObjs, function (_index, _obj) {
if (!_obj.oldPositionX) { _obj.oldPositionX = _obj.position.x; }
if (!_obj.oldPositionZ) { _obj.oldPositionZ = _obj.position.z; }
var movevalue=0;//该架子移动前 已经移动了多少
if( Math.abs(_obj.position[movemjjsParam.directStr]-_obj["oldPosition"+movemjjsParam.directStrLager])>10){
movevalue=_obj.position[movemjjsParam.directStr]-_obj["oldPosition"+movemjjsParam.directStrLager];
}
if (movevalue == 0) {//如果未移动过
if (movemjjsParam.directValue == movemjjsParam.onlyCanMoveValue) {
canMoveRealObjs.push(_obj);
}
} else {
if (movemjjsParam.directValue != movemjjsParam.onlyCanMoveValue) {
canMoveRealObjs.push(_obj);
}
}
});
console.log(canMoveRealObjs);
var moveL = { length: 0 };
$.each(canMoveRealObjs, function (_index, _obj) {
_obj["currentValue" + movemjjsParam.directStr] = _obj.position[movemjjsParam.directStr];
});
new TWEEN.Tween(moveL).to({
length: moveLength
}, 200).onUpdate(function (a) {
var _this = this;
$.each(canMoveRealObjs, function (_index, _obj) {
_obj.position[movemjjsParam.directStr] = _obj["currentValue" + movemjjsParam.directStr] + _this.length * movemjjsParam.directValue;
});
}).onComplete(function () {
_this.moveState = 0;
}).start();
}
//非互斥移动
ModelBusiness.prototype.moveMjjAll = function (obj, dir, moveLength) {
var _this = this;
var movemjjsParam = this.getNeedMoveMjjs(obj, dir);
/*
needMoveNubs: needMoveNubs,
needMoveMjjNames:needMoveMjjNames,
directStr: driStr,
directValue: directValue,
onlyCanMoveValue: onlyCanMoveValue
*/
if (movemjjsParam.directStr == "x") {
movemjjsParam.directStrLager = "X";
}
if (movemjjsParam.directStr == "z") {
movemjjsParam.directStrLager = "Z";
}
console.log(movemjjsParam); var moveMjjObjs = WT3DObj.commonFunc.findObjectsByNames(movemjjsParam.needMoveMjjNames);
var canMoveRealObjs = [];//真正能移动的架子
$.each(moveMjjObjs, function (_index, _obj) {
if (!_obj.oldPositionX) { _obj.oldPositionX = _obj.position.x; }
if (!_obj.oldPositionZ) { _obj.oldPositionZ = _obj.position.z; }
var movevalue = 0;//该架子移动前 已经移动了多少
if (Math.abs(_obj.position[movemjjsParam.directStr] - _obj["oldPosition" + movemjjsParam.directStrLager]) > 10) {
movevalue = _obj.position[movemjjsParam.directStr] - _obj["oldPosition" + movemjjsParam.directStrLager];
}
if (movevalue == 0) {//如果未移动过
if (movemjjsParam.directValue == movemjjsParam.onlyCanMoveValue) {
canMoveRealObjs.push(_obj);
}
} else {
if (movemjjsParam.directValue != movemjjsParam.onlyCanMoveValue) {
canMoveRealObjs.push(_obj);
}
}
});
console.log(canMoveRealObjs);
$.each(canMoveRealObjs, function (_index, _obj) {
_obj.position[movemjjsParam.directStr] = _obj.position[movemjjsParam.directStr] + moveLength * movemjjsParam.directValue;
}); //new TWEEN.Tween(moveL).to({
// length: moveLength
//}, 200).onUpdate(function (a) {
// var _this = this;
// $.each(canMoveRealObjs, function (_index, _obj) {
// _obj.position[movemjjsParam.directStr] = _obj["currentValue" + movemjjsParam.directStr] + _this.length * movemjjsParam.directValue;
// });
//}).onComplete(function () {
//}).start();
}
ModelBusiness.prototype.closeMJJ = function (obj,timelong,callBack) {
var info = modelBusiness.getMJJBindRelationByModelId(obj.name);
var maxColNub = info.maxColNub;
var prefixName = obj.name.split("_")[0] + "_" + obj.name.split("_")[1] + "_";//前缀
var mjjNames = [];
for (var i = 1; i <= maxColNub; i++) {
mjjNames.push(prefixName+i);
}
var moveMjjObjs = WT3DObj.commonFunc.findObjectsByNames(mjjNames);
$.each(moveMjjObjs, function (_index,_obj) {
new TWEEN.Tween(_obj.position).to({
x: _obj.oldPositionX,
z:_obj.oldPositionZ
}, timelong ? timelong : 200).onComplete(function () {
if (callBack) {
callBack();
}
}).start();
});
}

1.3、密集架支持通风，锁定、解锁、自检等操作，并配有相关动画。效果如下：

这里我们通过导入通风模型的方式来实现，当通风打开时，我们载入通风动画模型，然后定时销毁即可

实现如下：

//打开 1 关闭 0 通风
ModelBusiness.prototype.windFunc = function (type,position) {
var models = [{ "show": true, "uuid": "", "name": "flowtube_7", "objType": "flowTube", "points": [{ "x": -600, "y": 0, "z": 0 }, { "x": -300, "y": -350, "z": 0 }, { "x": 300, "y": -350, "z": null }, { "x": 600, "y": 0, "z": null }], "position": position, "scale": { "x": 1, "y": 1, "z": 1 }, "rotation": [{ "direction": "x", "degree": 0 }, { "direction": "y", "degree": Math.PI }, { "direction": "z", "degree": 0 }], "style": { "skinColor": 16772846, "imgurl": "../img/3dImg/right1.png", "opacity": 1, "canvasSkin": { "cwidth": 1024, "cheight": 128, "cwNub": 8, "chNub": 12, "cMarginW": 0.2, "cMarginH": 0.2, "speed": 8, "fps": 20, "direction": "w", "forward": "f", "side": 2, "run": true, "bgcolor": "rgba(0, 255, 34, 0.02)" } }, "segments": 3, "radialSegments": 2, "closed": false, "radius": 200, "showSortNub": 7000, "customType1": "", "customType2": "", "animation": null, "dbclickEvents": null, "BindDevId": null, "BindDevName": null, "devInfo": null, "BindMeteId": null, "BindMeteName": null }];
WT3DObj.commonFunc.loadModelsByJsons(models, { x: 0, y: 0, z: 0 }, { x: 0, y: 0, z: 0 }, true);
setTimeout(function () {
var flowtube_7 = WT3DObj.commonFunc.findObject("flowtube_7");
if (type == 1) {
layer.msg("正在执行打开通风！");
setTimeout(function () {
WT3DObj.commonFunc.changeObjsOpacity([flowtube_7], 1, 0.1, 800);
setTimeout(function () {
flowtube_7.visible = false;
WT3DObj.destoryObj(flowtube_7);
WT3DObj.destoryObj("flowtube_7");
}, 500);
}, 5000); } else {
setTimeout(function () {
layer.msg("正在执行关闭通风！");
new TWEEN.Tween(flowtube_7.scale).to({
x: 20,
y: 20,
z: 20,
}, 1000).onUpdate(function (a) {
}).onComplete(function () {
flowtube_7.visible = false;
flowtube_7.scale.x = 0.001;
flowtube_7.scale.y = 0.001;
flowtube_7.scale.z = 0.001;
setTimeout(function () {
WT3DObj.destoryObj(flowtube_7);
WT3DObj.destoryObj("flowtube_7");
}, 200);
}).start();
}, 1000);
}
}, 200);
}

与通风动画类似，我们通过载入锁动画模型，实现如下：

//开锁 1 关锁 0特效
ModelBusiness.prototype.lockFunc = function (position,type) {
var models = null;
if (type == 1) {
models = [{ "show": true, "uuid": "", "name": "lock_7", "objType": "GroupObj", "scale": { "x": 4, "y": 4, "z": 4 }, "position": { "x": 0, "y": 0, "z": 0 }, "rotation": [{ "direction": "x", "degree": 0 }, { "direction": "y", "degree": 0 }, { "direction": "z", "degree": 0 }], "childrens": [{ "show": true, "uuid": "", "name": "lock_7OBJCREN0", "objType": "ExtrudeGeometry", "position": { "x": 0, "y": 0, "z": 0 }, "style": { "skinColor": 5306186, "opacity": 0.8 }, "scale": { "x": 1, "y": 1, "z": 1 }, "shapeParm": { "points": [{ "x": 100, "y": -120, "type": "nomal" }, { "x": 100, "y": 120, "type": "nomal" }, { "x": -100, "y": 120, "type": "nomal" }, { "x": -100, "y": -120, "type": "nomal" }], "holes": [] }, "extrudeSettings": { "amount": 0, "curveSegments": 1, "steps": 1, "bevelEnabled": true, "bevelThickness": 1, "bevelSize": 1, "bevelSegments": 1, "extrudePathPoints": [{ "x": 0, "y": 0, "z": -50 }, { "x": 0, "y": 0, "z": 50 }] }, "showSortNub": 6000, "customType1": "", "customType2": "", "animation": null, "dbclickEvents": null, "rotation": [{ "direction": "x", "degree": 0 }, { "direction": "y", "degree": 0 }, { "direction": "z", "degree": 0 }], "BindDevId": null, "BindDevName": null, "devInfo": null, "BindMeteId": null, "BindMeteName": null }, { "show": true, "uuid": "", "name": "lock_7OBJCREN1", "objType": "tube", "points": [{ "x": 0, "y": 0, "z": 0 }, { "x": 0, "y": 150, "z": 0 }, { "x": -50, "y": 190, "z": 0 }, { "x": -110, "y": 190, "z": 0 }, { "x": -160, "y": 150, "z": 0 }, { "x": -170, "y": 60, "z": 0 }], "position": { "x": 84.692, "y": 33.246, "z": 0 }, "scale": { "x": 1, "y": 1, "z": 1 }, "rotation": [{ "direction": "x", "degree": 0 }, { "direction": "y", "degree": 0 }, { "direction": "z", "degree": 0 }], "style": { "skinColor": 5040966, "opacity": 0.9 }, "segments": 24, "radialSegments": 8, "closed": false, "radius": 20, "showSortNub": 7000, "customType1": "", "customType2": "", "animation": null, "dbclickEvents": null, "BindDevId": null, "BindDevName": null, "devInfo": null, "BindMeteId": null, "BindMeteName": null }], "showSortNub": 7000, "customType1": "", "customType2": "", "animation": null, "dbclickEvents": null, "BindDevId": null, "BindDevName": null, "devInfo": null, "BindMeteId": null, "BindMeteName": null }];
} else {
models = [{ "show": true, "uuid": "", "name": "lock_7", "objType": "GroupObj", "scale": { "x": 4, "y": 4, "z": 4 }, "position": { "x": 0, "y": 0, "z": 0 }, "rotation": [{ "direction": "x", "degree": 0 }], "childrens": [{ "show": true, "uuid": "", "name": "lock_7OBJCREN0", "objType": "ExtrudeGeometry", "position": { "x": 0, "y": 0, "z": 0 }, "style": { "skinColor": 5306186, "opacity": 0.8 }, "scale": { "x": 1, "y": 1, "z": 1 }, "shapeParm": { "points": [{ "x": 100, "y": -120, "type": "nomal" }, { "x": 100, "y": 120, "type": "nomal" }, { "x": -100, "y": 120, "type": "nomal" }, { "x": -100, "y": -120, "type": "nomal" }], "holes": [] }, "extrudeSettings": { "amount": 0, "curveSegments": 1, "steps": 1, "bevelEnabled": true, "bevelThickness": 1, "bevelSize": 1, "bevelSegments": 1, "extrudePathPoints": [{ "x": 0, "y": 0, "z": -50 }, { "x": 0, "y": 0, "z": 50 }] }, "showSortNub": 6000, "customType1": "", "customType2": "", "animation": null, "dbclickEvents": null, "rotation": [{ "direction": "x", "degree": 0 }, { "direction": "y", "degree": 0 }, { "direction": "z", "degree": 0 }], "BindDevId": null, "BindDevName": null, "devInfo": null, "BindMeteId": null, "BindMeteName": null }, { "show": true, "uuid": "", "name": "lock_7OBJCREN1", "objType": "tube", "points": [{ "x": 0, "y": 0, "z": 0 }, { "x": 0, "y": 150, "z": 0 }, { "x": -50, "y": 190, "z": 0 }, { "x": -110, "y": 190, "z": 0 }, { "x": -160, "y": 150, "z": 0 }, { "x": -170, "y": 60, "z": 0 }], "position": { "x": 84.692, "y": 75.037, "z": 0 }, "scale": { "x": 1, "y": 1, "z": 1 }, "rotation": [{ "direction": "x", "degree": -3.141592653589793 }, { "direction": "y", "degree": 1.2246468525851679e-16 }, { "direction": "z", "degree": -3.141592653589793 }], "style": { "skinColor": 5040966, "opacity": 0.9 }, "segments": 24, "radialSegments": 8, "closed": false, "radius": 20, "showSortNub": 7000, "customType1": "", "customType2": "", "animation": null, "dbclickEvents": null, "BindDevId": null, "BindDevName": null, "devInfo": null, "BindMeteId": null, "BindMeteName": null }], "showSortNub": 7000 }];
}
WT3DObj.commonFunc.loadModelsByJsons(models, position, { x: 0, y: 0, z: 0 }, true);
setTimeout(function () {
var lock7 = WT3DObj.commonFunc.findObject("lock_7");
if (type == 1) {
var top1 = lock7.children[1];
top1.oldpositiony = top1.position.y; var moveobj = { x: 0 };
new TWEEN.Tween(moveobj).to({
x: 25
}, 500).onUpdate(function (a) {
var _this = this;
top1.position.y = top1.oldpositiony + _this.x;
top1.matrixAutoUpdate = true;
}).onComplete(function () {
new TWEEN.Tween(top1.rotation).to({
y: Math.PI,
}, 1000).onUpdate(function (a) {
top1.matrixAutoUpdate = true;
}).onComplete(function () { setTimeout(function () {
WT3DObj.commonFunc.changeObjsOpacity([lock7], 1, 0.1, 800);
new TWEEN.Tween(lock7.scale).to({
x: 10,
y: 10,
z: 10,
}, 1000).onUpdate(function (a) {
}).onComplete(function () {
lock7.visible = false;
lock7.scale.x = 0.001;
lock7.scale.y = 0.001;
lock7.scale.z = 0.001;
setTimeout(function () {
WT3DObj.destoryObj(lock7);
WT3DObj.destoryObj("lock_7");
}, 200);
}).start(); }, 1000); }).start(); }).start(); } else {
var top1 = lock7.children[1];
top1.oldpositiony = top1.position.y;
new TWEEN.Tween(top1.rotation).to({
y: Math.PI,
}, 1000).onUpdate(function (a) {
top1.matrixAutoUpdate = true; }).onComplete(function () { var moveobj = { x: 0 };
new TWEEN.Tween(moveobj).to({
x: -25
}, 500).onUpdate(function (a) {
var _this = this;
top1.position.y = top1.oldpositiony + _this.x;
top1.matrixAutoUpdate = true;
}).onComplete(function () { setTimeout(function () {
WT3DObj.commonFunc.changeObjsOpacity([lock7], 1, 0.1, 800);
new TWEEN.Tween(lock7.scale).to({
x: 10,
y: 10,
z: 10,
}, 1000).onUpdate(function (a) { }).onComplete(function () {
lock7.visible = false;
lock7.scale.x = 0.001;
lock7.scale.y = 0.001;
lock7.scale.z = 0.001;
setTimeout(function () {
WT3DObj.destoryObj(lock7);
WT3DObj.destoryObj("lock_7");
}, 200);
}).start(); }, 1000); }).start(); }).start(); }
}, 200);}

1.4、库房内安装有区域控制器，八防感知系统等设备。点击设备可以看到其实时监控数据，效果如下：

这就比较简单了，我们只需要获取到模型的位置，再转换成屏幕的二维位置，然后再对应的位置上加上tips即可，这里我用的时layer.tips

实现如下：

ModelBusiness.prototype.showMsg = function (_obj, position, html, closeFunc) {
//获取位置
var screenPostion = WT3DObj.commonFunc.transToScreenCoord({ x: _obj.position.x + position.x, y: _obj.position.y + position.y, z: _obj.position.z + position.z });
$("#MarkMessageHelper").remove();
$("body").append("<div id='MarkMessageHelper' style='position:absolute;left:" + (screenPostion.x - 30) + "px;top:" + screenPostion.y + "px;height:2px;width:2px;z-index:1000;'></div>");
var urandom = (Math.random() * 100).toFixed(0);
layer.closeAll();
layer.tips(html, '#MarkMessageHelper', {
closeBtn: 1,
shade: false,
shadeClose: true,
area: ["300px", "200px"],
maxWidth: 1000,
maxHeight: 350,
time: 0,//是否定时关闭，0表示不关闭
cancel: function (index, layero) {
if (closeFunc) {
closeFunc();
}
},
tips: [1, "rgba(0,0,0,0.8)"] //还可配置颜色
});
}

二、虚拟小库房的效果与实现方式

项目中除了大库房的实际应用，还涉及到一个小库房展厅的各种设备接入与实现。

2.1、库房中，接入了轨道摄像机，普通摄像机，温湿度一体机，声光报警灯，灯控开关，门禁，rfid门卡，八防感知，区域控制器等等。小库房主界面效果如下：

2.2、由于小库房展厅的密集架没那么多，这里的打开密集架通道，我们可以动过强耦合的方式，将移动位置直接写死再代码里

代码如下：

//密集架控制
ModelBusiness.prototype.mjjCtrlSystem = function () {
showposition = { x: 200, y: 700, z: 0 };
showhtml = "";
var html = ' <div class="ctrbtn" id="btn_o1"> <img style="width:48px;height:48px;" src="../img/pageimg2/l1.png" title="打开1通道" /><br/>打开1通道</div>\
<div class="ctrbtn" id="btn_o2"><img style="width:48px;height:48px;" src="../img/pageimg2/l2.png" title="打开2通道" /><br/>打开2通道</div>\
<div class="ctrbtn" id="btn_o3"><img style="width:48px;height:48px;" src="../img/pageimg2/together.png" title="关闭" /><br/>关闭</div>\
';
//获取位置 this.showMsg2(null, null,300, html, function () {
$(".ctrbtn").click(function () {
{
var id = $(this).attr("id");
var state = -1;
switch (id) {
case "btn_o1":
{
state = "1";
WT3DObj.commonFunc.findObject("mjj_1_2").position.x = 2300;
WT3DObj.commonFunc.findObject("mjj_1_3").position.x = 1900; }
break;
case "btn_o2":
{
state = "2";
WT3DObj.commonFunc.findObject("mjj_1_2").position.x = 2879;
WT3DObj.commonFunc.findObject("mjj_1_3").position.x = 1500;
}
break;
case "btn_o3":
{
WT3DObj.commonFunc.findObject("mjj_1_2").position.x = 2879;
WT3DObj.commonFunc.findObject("mjj_1_3").position.x = 2428;
}
break;
}
layer.msg("控制命令已发送！");
webapi.controlDev("Sandtable/shelf", state, function (response) {
if (response) {
if (response.code == "1") response.msg = "控制成功";
layer.msg(response.msg);
}
}, function (error) {
layer.msg("控制失败！");
console.log(error);
});
} });
});
return;
}

2.3、所有密集架都可以打开，查看内部详情，双击密集架，镜头定位推进，然后打开密集架的内部结构，效果如下：

2.4、当密集架中有档案数据时，3d架子内会自动在对应的位置显示档案盒，双击档案盒对应的格子，为了便于操控，我通过div弹窗的方式，将档案盒详细脊背展现出来，

点击脊背，还详细展示出档案盒内的文件链接列表，这就看具体数据了，可能时pdf world excel 亦或者时拍照存留的图片

具体实现如下：

function openW(a) {
window.parent.$(".layui-layer-setwin").hide();
$("#fzbtn").hide();
window.parent.$("iframe").height($(window.parent).height() - 50); console.log(a);
var title = "";
var face = 0;
var quno = getQueryString("quno");
var colnub = getQueryString("colnub");
var row = a.name.split("_")[1];
var jie = a.name.split("_")[2];
if (a.name.indexOf("lattice1") >= 0) {
title = "左面，第" + row + "行，第" + jie+ "节";
} else {
title = "右面，第" + row + "行，第" + jie + "列";
face =1;
}
var detail = LatCache["r" + (face) + "_" + row + "_c_" + jie];
if (detail && detail.desc) {
title +="<font style='font-size:16px;margin-left:20px;'>("+ replaceNull(detail.desc)+")</font>";
}
layer.open({
type: 1, title: title,
skin: "layui-layer-rim",
shade: 0.8,
shadeClose: false,
area: [($(window).width() - 10) + "px", ($(window).height() -10) + "px"],
content: '<div style="width:100%;background-color:#d7d3d2 !important;overflow: auto;height: 100%;" id="boxsDivFather"><div id="boxsDiv" style="width:100%;overflow-x: auto;display:flex;overflow-y: hidden;transform-origin:0 0"></div></div>',
cancel: function () {
$("#fzbtn").show();
window.parent.$(".layui-layer-setwin").show();
window.parent.$("iframe").height($(window.parent).height() - 100); if (boxLayerIndex) {
layer.close(boxLayerIndex);
}
}, success: function () {
scale15 = false;
$(".layui-layer-content").after("<button id='fdbtn' style=' text-align:center;position:absolute; top: 8px;font-size: 16px;left: 500px;width: 80px;height: 28px; background: #288fd8;color: white;border: 0px;margin-left:20px;cursor:pointer;' onclick='fdFunc()'><i class='ace-icon fa fa-search-plus' style='font-size:18px;'></i>&nbsp;放大</button>");
setTimeout(function () {
webapi.deviceInfo(room, dataId, face, row, jie, function (books) { var allhtml = ""; books=books.sort(function(a,b){return a.sortNub-b.sortNub});
$.each(books,function(_bindex,_bobj){
boxcacheData["b_"+_bobj.id]=_bobj; var ftype = 0;
if (mjjparam.fileType && mjjparam.fileType != 0) {
ftype = mjjparam.fileType;
} else if (_bobj.boxType) {
ftype = _bobj.boxType;
}
allhtml += getBoxFaceByType(ftype, _bindex, _bobj) });
$("#boxsDiv").html(allhtml); console.log(a.name);
$(".boxSelectCSS").click(function () {
var id = $(this).attr("data-id");
webapi.boxDetailInfo(id, function (files) { var showhtml = ' <div class="row" style="width:320px; margin-left:7px; margin-top:10px;">'
+ '<div class="col-sm-12" style="margin-top: 10px">';
showhtml += '<div class="input-group">'
+ '<span class="input-group-addon" style="font-size: 16px;">文件列表:</span>'
+ '</div>'
$.each(files, function (_findex,_fobj) { showhtml += '<div class="input-group">'
+ '<font style="color:#16ff59;cursor:pointer;" onclick="window.open(\'' + _fobj.fileSrc + '\');">' + _fobj.name + '</font>'
+ '</div>';
});
showhtml += '</div></div>';
boxLayerIndex = layer.tips(showhtml, "#b_archiveno_" + id, {
closeBtn: 1,
tips:2,
shade: false,
shadeClose: true,
area: ["280px", "auto"],
maxWidth: 1000,
maxHeight: 750,
time: 0,//是否定时关闭，0表示不关闭
cancel: function (index, layero) {
boxLayerIndex = null;
},
tips: [1, "rgba(0,0,0,0.8)"] //还可配置颜色
}); }, function (err) {
}, false); });
$(".boxSelectCSS").dblclick(function () {
var id = $(this).attr("data-id");
webapi.boxDetailInfo(id, function (files) {
if (files.length > 0) {
window.open( files[0].fileSrc);
} }, function (err) {
}, false); }); var scaleheigt = ($(window).height() - 70) / $("#boxsDiv").height();
if (scaleheigt < 1) {
ScaleSize = scaleheigt;
$("#boxsDiv").width(1 / scaleheigt * 100 + "%");
$("#boxsDiv").css("transform", "scale(" + scaleheigt + ")");
} else {
ScaleSize = 1;
}
}, function () { });
}, 200);
}
});}

2.5、控制轨道相机的位置，通过选择通道，改变轨道相机的位置

这个实现比较简单，我们只需要修改它的position属性即可，

//轨道摄像机ModelBusiness.prototype.gdsxjCtrlSystem = function () {
showposition = { x: 200, y: 700, z: 0 };
showhtml = "";
var html = ' <div class="ctrbtn" id="btn_o1"> <img style="width:48px;height:48px;" src="../img/pageimg2/l1.png" title="1通道" /><br/>1通道</div>\
<div class="ctrbtn" id="btn_o2"><img style="width:48px;height:48px;" src="../img/pageimg2/l2.png" title="2通道" /><br/>2通道</div>\
<div class="ctrbtn" id="btn_o3"><img style="width:48px;height:48px;" src="../img/pageimg2/l3.png" title="原点" /><br/>原点</div>\
';
//获取位置 this.showMsg2(null, null, 300, html, function () {
$(".ctrbtn").click(function () {
{
var id = $(this).attr("id");
var state = -1;
switch (id) {
case "btn_o1":
{
state = "1";
WT3DObj.commonFunc.findObject("xxj_2_263").position.x = 3200;
}
break;
case "btn_o2":
{
state = "2";
WT3DObj.commonFunc.findObject("xxj_2_263").position.x = 2300;
}
break;
case "btn_o3":
{
WT3DObj.commonFunc.findObject("xxj_2_263").position.x = 1400;
}
break;
}
layer.msg("控制命令已发送！");
webapi.controlDev("Sandtable/cam", state, function (response) {
if (response) {
if (response.code == "1") response.msg = "控制成功";
layer.msg(response.msg);
}
}, function (error) {
layer.msg("控制失败！");
console.log(error);
});
} });
});
return;
}

2.6、控制门禁，实现远程开门，在三维里面反馈展示

具体实现：

//门禁
ModelBusiness.prototype.doorCtrlSystem = function () {
showposition = { x: 200, y: 700, z: 0 };
showhtml = "";
var html = ' <div class="ctrbtn" id="btn_closedoor"> <img style="width:48px;height:48px;" src="../img/pageimg2/lock.png" title="关灯" /><br/>关门</div>\
<div class="ctrbtn" id="btn_opendoor"><img style="width:48px;height:48px;" src="../img/pageimg2/unlock.png" title="开门" /><br/>开门</div>\
';
//获取位置 this.showMsg2(null, null, 200, html, function () {
$(".ctrbtn").click(function () {
{
var id = $(this).attr("id");
var state = -1;
switch (id) {
case "btn_closedoor":
{
state = "2"; WT3DObj.commonFunc.findObject("door_1").position.x = -163.322
WT3DObj.commonFunc.findObject("door_1").position.z = 2680.743
WT3DObj.commonFunc.findObject("door_1").rotation.y = 0;
WT3DObj.commonFunc.findObject("door_2").position.x = -163.322
WT3DObj.commonFunc.findObject("door_2").position.z = 3081.653
WT3DObj.commonFunc.findObject("door_2").rotation.y = 0
}
break;
case "btn_opendoor":
{
state = "1"; WT3DObj.commonFunc.findObject("door_1").position.x = 74
WT3DObj.commonFunc.findObject("door_1").position.z = 2500
WT3DObj.commonFunc.findObject("door_1").rotation.y = Math.PI / 2;
WT3DObj.commonFunc.findObject("door_2").position.x = 74
WT3DObj.commonFunc.findObject("door_2").position.z = 3250
WT3DObj.commonFunc.findObject("door_2").rotation.y = -Math.PI / 2
state = "1";
}
break; }
layer.msg("控制命令已发送！");
webapi.controlDev("Sadntable/door", state, function (response) {
if (response) {
if (response.code == "1") response.msg = "控制成功";
layer.msg(response.msg);
}
}, function (error) {
layer.msg("控制失败！");
console.log(error);
});
} });
});
return;
}

2.7、控制温湿度一体机

这里实现，也是通过载入开关动画的方式

具体实现：

//一体机 16
ModelBusiness.prototype.ctrlYITIJI = function (model, action) {
{
var cresultState = true;
switch (action) {
case "1":
cresultState = modelBusiness.ctrlJSAnimation(model);
break;
case "2":
cresultState = modelBusiness.closeDev(model);
break;
}
//发送控制命令
if (cresultState) { webapi.controlDev("Sandtable/aiodevice", action, function (response) {
if (response) {
if (response.msg == "") response.msg = "控制成功"; layer.msg(response.msg);
}
}, function (error) {
layer.msg("控制失败！");
console.log(error);
});
}
}
}

2.8、控制灯控系统

这里我们通过加上光照效果，实现方式是修改环境光显示隐藏的属性，即可达到灯光效果，由于全程可见，我们通过地面的阴影来体现灯光的开关。

具体实现：

//灯控
ModelBusiness.prototype.lightCtrlSystem = function () {
showposition = { x: 200, y: 700, z: 0 };
showhtml = "";
var html = ' <div class="ctrbtn" id="btn_closelight"> <img style="width:48px;height:48px;" src="../img/pageimg2/closeLight.png" title="关灯" /><br/>关灯</div>\
<div class="ctrbtn" id="btn_l3"><img style="width:48px;height:48px;" src="../img/pageimg2/l3.png" title="开灯" /><br/>开灯</div>\
';
//获取位置 this.showMsg2(null, null, 200, html, function () {
$(".ctrbtn").click(function () {
{
var id = $(this).attr("id");
var state = -1;
switch (id) {
case "btn_closelight":
{
state = "2"; WT3DObj.commonFunc.findObject("DirectionalLight_429").visible=false;
}
break;
case "btn_l1":
{
state = 1;
}
break;
case "btn_l2":
{
state = 2;
}
break;
case "btn_l3":
{
WT3DObj.commonFunc.findObject("DirectionalLight_429").visible = true;
state = "1";
}
break;
}
layer.msg("控制命令已发送！");
webapi.controlDev("Sandtable/light", state, function (response) {
if (response) {
if (response.code == "1") response.msg = "控制成功";
layer.msg(response.msg);
}
}, function (error) {
layer.msg("控制失败！");
console.log(error);
});
} });
});
return;
}

2.9、声光报警器触发。

通过修改声光效果的属性来实现。

实现代码如下：

//报警器
ModelBusiness.prototype.alarmCtrlSystem = function () {
return;
showposition = { x: 200, y: 700, z: 0 };
showhtml = ""; var html = ' <div class="ctrbtn" id="btn_openlight"> <img style="width:48px;height:48px;" src="../img/pageimg2/bf.png" title="布防" /><br/>布防</div>\
<div class="ctrbtn" id="btn_l1"> <img style="width:48px;height:48px;" src="../img/pageimg2/cf.png" title="撤防" /><br/>撤防</div>\
';
//获取位置 this.showMsg2(null, null, 200, html, function () {
$(".ctrbtn").click(function () {
var _id = $(this).attr("id");
switch (_id) {
case "btn_openlight":
{ }
break;
case "btn_l1":
{ }
break;
case "btn_l2":
{ }
break;
case "btn_l3":
{ }
break;
case "ptdBtn":
{ }
break;
}
});
});
}

2.10、库房内搜索功能，可以通过关键之搜索，快速定位档案位置。

三、该篇总结

本篇文章主要介绍了3D密集架的功能与效果。并且对主要实现逻辑代码进行了讲解

后面的文章会对具体模型的实现方式进行讲解，由于篇幅原因，先讲到这里，后面持续更新。

亦或者通过下列方式交流：

邮箱交流 1203193731@qq.com

微信交流：

如果你有什么要交流的心得 可邮件我

其它相关文章：

使用webgl(three.js)创建3D机房，3D机房微模块详细介绍(升级版二)

如何用webgl(three.js)搭建一个3D库房-第一课

如何用webgl(three.js)搭建一个3D库房,3D密集架,3D档案室,-第二课

使用webgl(three.js)搭建一个3D建筑，3D消防模拟——第三课

使用webgl(three.js)搭建一个3D智慧园区、3D建筑，3D消防模拟，web版3D,bim管理系统——第四课

如何用webgl(three.js)搭建不规则建筑模型，客流量热力图模拟

使用webgl(three.js)搭建一个3D智慧园区、3D建筑，3D消防模拟，web版3D,bim管理系统——第四课（炫酷版一）

使用webgl(three.js)搭建3D智慧园区、3D大屏，3D楼宇，智慧灯杆三维展示，3D灯杆，web版3D,bim管理系统——第六课

物联网3D，物业基础设施3D运维，使用webgl(three.js)与物联网设备结合案例。搭建智慧楼宇，智慧园区，3D园区、3D物业设施，3D楼宇管理系统——第八课