正文
用 three.js 绘制三维带箭头线 (线内箭头)
提示：扫一扫查出行【扫一扫了解最新限行尾号】
复制提示
在LineMaterial.js基础上修改的ArrowLineMaterial.js代码：
/** * @author WestLangley / http://github.com/WestLangley * * parameters = { * color: <hex>, * linewidth: <float>, * dashed: <boolean>, * dashScale: <float>, * dashSize: <float>, * gapSize: <float>, * resolution: <Vector2>, // to be set by renderer * } */ import { ShaderLib, ShaderMaterial, UniformsLib, UniformsUtils, Vector2 } from "../build/three.module.js"; UniformsLib.line = { linewidth: { value: 1 }, resolution: { value: new Vector2(1, 1) }, dashScale: { value: 1 }, dashSize: { value: 1 }, gapSize: { value: 1 } // todo FIX - maybe change to totalSize }; ShaderLib['line'] = { uniforms: UniformsUtils.merge([ UniformsLib.common, UniformsLib.fog, UniformsLib.line ]), vertexShader: ` #include <common> #include <color_pars_vertex> #include <fog_pars_vertex> #include <logdepthbuf_pars_vertex> #include <clipping_planes_pars_vertex> uniform float linewidth; uniform vec2 resolution; attribute vec3 instanceStart; attribute vec3 instanceEnd; attribute vec3 instanceColorStart; attribute vec3 instanceColorEnd; varying vec2 vUv; varying float lineLength; #ifdef USE_DASH uniform float dashScale; attribute float instanceDistanceStart; attribute float instanceDistanceEnd; varying float vLineDistance; #endif void trimSegment( const in vec4 start, inout vec4 end ) { // trim end segment so it terminates between the camera plane and the near plane // conservative estimate of the near plane float a = projectionMatrix[ 2 ][ 2 ]; // 3nd entry in 3th column float b = projectionMatrix[ 3 ][ 2 ]; // 3nd entry in 4th column float nearEstimate = - 0.5 * b / a; float alpha = ( nearEstimate - start.z ) / ( end.z - start.z ); end.xyz = mix( start.xyz, end.xyz, alpha ); } void main() { #ifdef USE_COLOR vColor.xyz = ( position.y < 0.5 ) ? instanceColorStart : instanceColorEnd; #endif #ifdef USE_DASH vLineDistance = ( position.y < 0.5 ) ? dashScale * instanceDistanceStart : dashScale * instanceDistanceEnd; #endif float aspect = resolution.x / resolution.y; vUv = uv; // camera space vec4 start = modelViewMatrix * vec4( instanceStart, 1.0 ); vec4 end = modelViewMatrix * vec4( instanceEnd, 1.0 ); // special case for perspective projection, and segments that terminate either in, or behind, the camera plane // clearly the gpu firmware has a way of addressing this issue when projecting into ndc space // but we need to perform ndc-space calculations in the shader, so we must address this issue directly // perhaps there is a more elegant solution -- WestLangley bool perspective = ( projectionMatrix[ 2 ][ 3 ] == - 1.0 ); // 4th entry in the 3rd column if ( perspective ) { if ( start.z < 0.0 && end.z >= 0.0 ) { trimSegment( start, end ); } else if ( end.z < 0.0 && start.z >= 0.0 ) { trimSegment( end, start ); } } // clip space vec4 clipStart = projectionMatrix * start; vec4 clipEnd = projectionMatrix * end; // ndc space vec2 ndcStart = clipStart.xy / clipStart.w; vec2 ndcEnd = clipEnd.xy / clipEnd.w; // direction vec2 dir = ndcEnd - ndcStart; // account for clip-space aspect ratio dir.x *= aspect; dir = normalize( dir ); // perpendicular to dir vec2 offset = vec2( dir.y, - dir.x ); // undo aspect ratio adjustment dir.x /= aspect; offset.x /= aspect; // sign flip if ( position.x < 0.0 ) offset *= - 1.0; // endcaps if ( position.y < 0.0 ) { offset += - dir; } else if ( position.y > 1.0 ) { offset += dir; } // adjust for linewidth offset *= linewidth; // adjust for clip-space to screen-space conversion // maybe resolution should be based on viewport ... offset /= resolution.y; // select end vec4 clip = ( position.y < 0.5 ) ? clipStart : clipEnd; // back to clip space offset *= clip.w; clip.xy += offset; gl_Position = clip; vec4 mvPosition = ( position.y < 0.5 ) ? start : end; // this is an approximation //lineLength = distance(ndcStart, ndcEnd); lineLength = distance(ndcStart, ndcEnd) * (1.57 + abs(atan(dir.x / dir.y))) / 2.0; //lineLength = distance(clipStart.xyz, clipEnd.xyz); //lineLength = distance(start.xyz, end.xyz); #include <logdepthbuf_vertex> #include <clipping_planes_vertex> #include <fog_vertex> } `, fragmentShader: ` uniform vec3 diffuse; uniform float opacity; uniform sampler2D map; varying float lineLength; #ifdef USE_DASH uniform float dashSize; uniform float gapSize; #endif varying float vLineDistance; #include <common> #include <color_pars_fragment> #include <fog_pars_fragment> #include <logdepthbuf_pars_fragment> #include <clipping_planes_pars_fragment> varying vec2 vUv; void main() { #include <clipping_planes_fragment> #ifdef USE_DASH if ( vUv.y < - 1.0 || vUv.y > 1.0 ) discard; // discard endcaps if ( mod( vLineDistance, dashSize + gapSize ) > dashSize ) discard; // todo - FIX #endif if ( abs( vUv.y ) > 1.0 ) { float a = vUv.x; float b = ( vUv.y > 0.0 ) ? vUv.y - 1.0 : vUv.y + 1.0; float len2 = a * a + b * b; if ( len2 > 1.0 ) discard; } vec4 diffuseColor = vec4( diffuse, opacity ); #include <logdepthbuf_fragment> #include <color_fragment> vec4 c; if ( abs( vUv.y ) > 1.0 ) { c = vec4(diffuseColor.rgb, diffuseColor.a); } else { vec2 rpt = vec2(0.5, 1.0); rpt.y *= lineLength * 5.0; //rpt.y *= lineLength / 500.0; rpt.y = floor(rpt.y + 0.5); if(rpt.y < 1.0) { rpt.y = 1.0; } if(rpt.y > 5.0) { rpt.y = 5.0; } c = vec4(1.0, 1.0, 1.0, 1.0); c *= texture2D( map, vUv * rpt ); } gl_FragColor = c; //#include <premultiplied_alpha_fragment> //#include <tonemapping_fragment> //#include <encodings_fragment> //#include <fog_fragment> } ` }; var ArrowLineMaterial = function (parameters) { ShaderMaterial.call(this, { type: 'ArrowLineMaterial', uniforms: Object.assign({}, UniformsUtils.clone(ShaderLib['line'].uniforms), { map: { value: null }, }), vertexShader: ShaderLib['line'].vertexShader, fragmentShader: ShaderLib['line'].fragmentShader, clipping: true // required for clipping support }); this.dashed = false; Object.defineProperties(this, { map: { enumerable: true, get: function () { return this.uniforms.map.value; }, set: function (value) { this.uniforms.map.value = value; } }, color: { enumerable: true, get: function () { return this.uniforms.diffuse.value; }, set: function (value) { this.uniforms.diffuse.value = value; } }, linewidth: { enumerable: true, get: function () { return this.uniforms.linewidth.value; }, set: function (value) { this.uniforms.linewidth.value = value; } }, dashScale: { enumerable: true, get: function () { return this.uniforms.dashScale.value; }, set: function (value) { this.uniforms.dashScale.value = value; } }, dashSize: { enumerable: true, get: function () { return this.uniforms.dashSize.value; }, set: function (value) { this.uniforms.dashSize.value = value; } }, gapSize: { enumerable: true, get: function () { return this.uniforms.gapSize.value; }, set: function (value) { this.uniforms.gapSize.value = value; } }, resolution: { enumerable: true, get: function () { return this.uniforms.resolution.value; }, set: function (value) { this.uniforms.resolution.value.copy(value); } } }); this.setValues(parameters); }; ArrowLineMaterial.prototype = Object.create(ShaderMaterial.prototype); ArrowLineMaterial.prototype.constructor = ArrowLineMaterial; ArrowLineMaterial.prototype.isLineMaterial = true; export { ArrowLineMaterial };
