正文
Kafka配置文件server.properties（三个版本）
提示：扫一扫查出行【扫一扫了解最新限行尾号】
复制提示
前言
其实每个版本都有些许改动，只不过改动大小而已，但是网上的教程都真的太老了，其实更新一下也费不了多少时间
0.9.0
# Licensed to the Apache Software Foundation (ASF) under one or more
# contributor license agreements. See the NOTICE file distributed with
# this work for additional information regarding copyright ownership.
# The ASF licenses this file to You under the Apache License, Version 2.0
# (the "License"); you may not use this file except in compliance with
# the License. You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# see kafka.server.KafkaConfig for additional details and defaults
############################# Server Basics #############################
# The id of the broker. This must be set to a unique integer for each broker.
# 节点的ID，必须与其它节点不同
broker.id=0
############################# Socket Server Settings #############################
listeners=PLAINTEXT://:9092
# The port the socket server listens on
# 监听端口
#port=9092
# Hostname the broker will bind to. If not set, the server will bind to all interfaces
# 节点需要绑定的主机名称。如果没有设置，服务器会绑定到所有接口
#host.name=localhost
# Hostname the broker will advertise to producers and consumers. If not set, it uses the
# value for "host.name" if configured. Otherwise, it will use the value returned from
# java.net.InetAddress.getCanonicalHostName().
# 节点的主机名会通知给生产者和消费者。如果没有设置，它将会使用"host.name"的值（前提是设置了host.name）。
# 否则他会使用java.net.InetAddress.getCanonicalHostName()的返回值
#advertised.host.name=<hostname routable by clients>
# The port to publish to ZooKeeper for clients to use. If this is not set,
# it will publish the same port that the broker binds to.
# 这个端口将暴露给Zookeeper以供客户端来使用。如果没有设置，将会暴露节点绑定的端口
#advertised.port=<port accessible by clients>
# The number of threads handling network requests
# 接受网络请求的线程数
num.network.threads=3
# The number of threads doing disk I/O、
# 进行磁盘IO的线程数
num.io.threads=8
# The send buffer (SO_SNDBUF) used by the socket server
# 套接字服务器使用的发送缓冲区大小
socket.send.buffer.bytes=102400
# The receive buffer (SO_RCVBUF) used by the socket server
# 套接字服务器使用的接收缓冲区大小
socket.receive.buffer.bytes=102400
# The maximum size of a request that the socket server will accept (protection against OOM)
# 单个请求最大能接收的数据量
socket.request.max.bytes=104857600
############################# Log Basics #############################
# A comma seperated list of directories under which to store log files
# 一个逗号分隔的目录列表，用来存储日志文件
log.dirs=/tmp/kafka-logs
# The default number of log partitions per topic. More partitions allow greater
# parallelism for consumption, but this will also result in more files across
# the brokers.
# 每个主题的日志分区的默认数量。更多的分区允许更大的并行操作，但是它会导致节点产生更多的文件
num.partitions=1
# The number of threads per data directory to be used for log recovery at startup and flushing at shutdown.
# This value is recommended to be increased for installations with data dirs located in RAID array.
# 每个数据目录中的线程数，用于在启动时日志恢复，并在关闭时刷新。
num.recovery.threads.per.data.dir=1
############################# Log Flush Policy #############################
# Messages are immediately written to the filesystem but by default we only fsync() to sync
# the OS cache lazily. The following configurations control the flush of data to disk.
# 消息直接被写入文件系统，但是默认情况下我们仅仅调用fsync()以延迟的同步系统缓存
# There are a few important trade-offs here:
# 这些有一些重要的权衡
# 1. Durability: Unflushed data may be lost if you are not using replication.
# 2. Latency: Very large flush intervals may lead to latency spikes when the flush does occur as there will be a lot of data to flush.
# 3. Throughput: The flush is generally the most expensive operation, and a small flush interval may lead to exceessive seeks.
# 1. 持久性:如果不使用复制，未刷新的数据可能会丢失。
# 2. 延迟:非常大的刷新间隔可能会在刷新时导致延迟，因为将会有大量数据刷新。
# 3. 吞吐量:刷新通常是最昂贵的操作，而一个小的刷新间隔可能会导致过多的搜索。
# The settings below allow one to configure the flush policy to flush data after a period of time or
# every N messages (or both). This can be done globally and overridden on a per-topic basis.
# 下面的设置允许你去配置刷新策略，每隔一段时间刷新或者一次N个消息（或者两个都配置）。这可以在全局范围内完成，并在每个主题的基础上重写。
# The number of messages to accept before forcing a flush of data to disk
# 在强制刷新数据到磁盘执勤啊允许接收消息的数量
#log.flush.interval.messages=10000
# The maximum amount of time a message can sit in a log before we force a flush
# 在强制刷新之前，消息可以在日志中停留的最长时间
#log.flush.interval.ms=1000
############################# Log Retention Policy #############################
# The following configurations control the disposal of log segments. The policy can
# be set to delete segments after a period of time, or after a given size has accumulated.
# 以下的配置控制了日志段的处理。策略可以配置为每隔一段时间删除片段或者到达一定大小之后。
# A segment will be deleted whenever *either* of these criteria are met. Deletion always happens
# from the end of the log.
# 当满足这些条件时，将会删除一个片段。删除总是发生在日志的末尾。
# The minimum age of a log file to be eligible for deletion
# 一个日志的最小存活时间，可以被删除
log.retention.hours=168
# A size-based retention policy for logs. Segments are pruned from the log as long as the remaining
# segments don't drop below log.retention.bytes.
# 一个基于大小的日志保留策略。段将被从日志中删除只要剩下的部分段不低于log.retention.bytes。
#log.retention.bytes=1073741824
# The maximum size of a log segment file. When this size is reached a new log segment will be created.
# 每一个日志段大小的最大值。当到达这个大小时，会生成一个新的片段。
log.segment.bytes=1073741824
# The interval at which log segments are checked to see if they can be deleted according
# to the retention policies
# 检查日志段的时间间隔，看是否可以根据保留策略删除它们
log.retention.check.interval.ms=300000
############################# Zookeeper #############################
# Zookeeper connection string (see zookeeper docs for details).
# Zookeeper连接字符串（具体见Zookeeper文档）
# This is a comma separated host:port pairs, each corresponding to a zk
# 这是一个以逗号为分割的部分，每一个都匹配一个Zookeeper
# server. e.g. "127.0.0.1:3000,127.0.0.1:3001,127.0.0.1:3002".
# You can also append an optional chroot string to the urls to specify the
# root directory for all kafka znodes.
# 您还可以将一个可选的chroot字符串附加到url，以指定所有kafka znode的根目录。
zookeeper.connect=localhost:2181
# Timeout in ms for connecting to zookeeper
# 连接到Zookeeper的超时时间
zookeeper.connection.timeout.ms=6000
0.10.1
# Licensed to the Apache Software Foundation (ASF) under one or more
# contributor license agreements. See the NOTICE file distributed with
# this work for additional information regarding copyright ownership.
# The ASF licenses this file to You under the Apache License, Version 2.0
# (the "License"); you may not use this file except in compliance with
# the License. You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# see kafka.server.KafkaConfig for additional details and defaults
############################# Server Basics #############################
# The id of the broker. This must be set to a unique integer for each broker.
# 节点的ID，必须与其它节点不同
broker.id=0
# Switch to enable topic deletion or not, default value is false
# 选择启用删除主题功能，默认false
#delete.topic.enable=true
############################# Socket Server Settings #############################
# The address the socket server listens on. It will get the value returned from
# java.net.InetAddress.getCanonicalHostName() if not configured.
# 套接字服务器坚挺的地址。如果没有配置，就使用java.net.InetAddress.getCanonicalHostName()的返回值
# FORMAT:格式：
# listeners = security_protocol://host_name:port
# EXAMPLE:例子：
# listeners = PLAINTEXT://your.host.name:9092
#listeners=PLAINTEXT://:9092
# Hostname and port the broker will advertise to producers and consumers. If not set,
# it uses the value for "listeners" if configured. Otherwise, it will use the value
# returned from java.net.InetAddress.getCanonicalHostName().
# 节点的主机名会通知给生产者和消费者。如果没有设置，如果配置了"listeners"就使用"listeners"的值。
# 否则就使用java.net.InetAddress.getCanonicalHostName()的返回值
#advertised.listeners=PLAINTEXT://your.host.name:9092
# The number of threads handling network requests
# 接受网络请求的线程数
num.network.threads=3
# The number of threads doing disk I/O
# 进行磁盘IO的线程数
num.io.threads=8
# The send buffer (SO_SNDBUF) used by the socket server
# 套接字服务器使用的发送缓冲区大小
socket.send.buffer.bytes=102400
# The receive buffer (SO_RCVBUF) used by the socket server
# 套接字服务器使用的接收缓冲区大小
socket.receive.buffer.bytes=102400
# The maximum size of a request that the socket server will accept (protection against OOM)
# 单个请求最大能接收的数据量
socket.request.max.bytes=104857600
############################# Log Basics #############################
# A comma seperated list of directories under which to store log files
# 一个逗号分隔的目录列表，用来存储日志文件
log.dirs=/tmp/kafka-logs
# The default number of log partitions per topic. More partitions allow greater
# parallelism for consumption, but this will also result in more files across
# the brokers.
# 每个主题的日志分区的默认数量。更多的分区允许更大的并行操作，但是它会导致节点产生更多的文件
num.partitions=1
# The number of threads per data directory to be used for log recovery at startup and flushing at shutdown.
# This value is recommended to be increased for installations with data dirs located in RAID array.
# 每个数据目录中的线程数，用于在启动时日志恢复，并在关闭时刷新。
num.recovery.threads.per.data.dir=1
############################# Log Flush Policy #############################
# Messages are immediately written to the filesystem but by default we only fsync() to sync
# the OS cache lazily. The following configurations control the flush of data to disk.
# 消息直接被写入文件系统，但是默认情况下我们仅仅调用fsync()以延迟的同步系统缓存
# There are a few important trade-offs here:
# 这些有一些重要的权衡
# 1. Durability: Unflushed data may be lost if you are not using replication.
# 2. Latency: Very large flush intervals may lead to latency spikes when the flush does occur as there will be a lot of data to flush.
# 3. Throughput: The flush is generally the most expensive operation, and a small flush interval may lead to exceessive seeks.
# 1. 持久性:如果不使用复制，未刷新的数据可能会丢失。
# 2. 延迟:非常大的刷新间隔可能会在刷新时导致延迟，因为将会有大量数据刷新。
# 3. 吞吐量:刷新通常是最昂贵的操作，而一个小的刷新间隔可能会导致过多的搜索。
# The settings below allow one to configure the flush policy to flush data after a period of time or
# every N messages (or both). This can be done globally and overridden on a per-topic basis.
# 下面的设置允许你去配置刷新策略，每隔一段时间刷新或者一次N个消息（或者两个都配置）。这可以在全局范围内完成，并在每个主题的基础上重写。
# The number of messages to accept before forcing a flush of data to disk
# 在强制刷新数据到磁盘之前允许接收消息的数量
#log.flush.interval.messages=10000
# The maximum amount of time a message can sit in a log before we force a flush
# 在强制刷新之前，消息可以在日志中停留的最长时间
#log.flush.interval.ms=1000
############################# Log Retention Policy #############################
# The following configurations control the disposal of log segments. The policy can
# be set to delete segments after a period of time, or after a given size has accumulated.
# 以下的配置控制了日志段的处理。策略可以配置为每隔一段时间删除片段或者到达一定大小之后。
# A segment will be deleted whenever *either* of these criteria are met. Deletion always happens
# from the end of the log.
# 当满足这些条件时，将会删除一个片段。删除总是发生在日志的末尾。
# The minimum age of a log file to be eligible for deletion
# 一个日志的最小存活时间，可以被删除
log.retention.hours=168
# A size-based retention policy for logs. Segments are pruned from the log as long as the remaining
# segments don't drop below log.retention.bytes.
# 一个基于大小的日志保留策略。段将被从日志中删除只要剩下的部分段不低于log.retention.bytes。
#log.retention.bytes=1073741824
# The maximum size of a log segment file. When this size is reached a new log segment will be created.
# 每一个日志段大小的最大值。当到达这个大小时，会生成一个新的片段。
log.segment.bytes=1073741824
# The interval at which log segments are checked to see if they can be deleted according
# to the retention policies
# 检查日志段的时间间隔，看是否可以根据保留策略删除它们
log.retention.check.interval.ms=300000
############################# Zookeeper #############################
# Zookeeper connection string (see zookeeper docs for details).
# Zookeeper连接字符串（具体见Zookeeper文档）
# This is a comma separated host:port pairs, each corresponding to a zk
# 这是一个以逗号为分割的部分，每一个都匹配一个Zookeeper
# server. e.g. "127.0.0.1:3000,127.0.0.1:3001,127.0.0.1:3002".
# You can also append an optional chroot string to the urls to specify the
# root directory for all kafka znodes.
# 您还可以将一个可选的chroot字符串附加到url，以指定所有kafka znode的根目录。
zookeeper.connect=localhost:2181
# Timeout in ms for connecting to zookeeper
# 连接到Zookeeper的超时时间
zookeeper.connection.timeout.ms=6000
0.11.0
# Licensed to the Apache Software Foundation (ASF) under one or more
# contributor license agreements. See the NOTICE file distributed with
# this work for additional information regarding copyright ownership.
# The ASF licenses this file to You under the Apache License, Version 2.0
# (the "License"); you may not use this file except in compliance with
# the License. You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# see kafka.server.KafkaConfig for additional details and defaults
############################# Server Basics #############################
# The id of the broker. This must be set to a unique integer for each broker.
# 节点的ID，必须与其它节点不同
broker.id=0
# Switch to enable topic deletion or not, default value is false
# 选择启用删除主题功能，默认false
#delete.topic.enable=true
############################# Socket Server Settings #############################
# The address the socket server listens on. It will get the value returned from
# java.net.InetAddress.getCanonicalHostName() if not configured.
# 套接字服务器坚挺的地址。如果没有配置，就使用java.net.InetAddress.getCanonicalHostName()的返回值
# FORMAT:
# listeners = listener_name://host_name:port
# EXAMPLE:
# listeners = PLAINTEXT://your.host.name:9092
#listeners=PLAINTEXT://:9092
# Hostname and port the broker will advertise to producers and consumers. If not set,
# it uses the value for "listeners" if configured. Otherwise, it will use the value
# returned from java.net.InetAddress.getCanonicalHostName().
# 节点的主机名会通知给生产者和消费者。如果没有设置，如果配置了"listeners"就使用"listeners"的值。
# 否则就使用java.net.InetAddress.getCanonicalHostName()的返回值
#advertised.listeners=PLAINTEXT://your.host.name:9092
# Maps listener names to security protocols, the default is for them to be the same. See the config documentation for more details
# 将侦听器的名称映射到安全协议，默认情况下它们是相同的。有关详细信息，请参阅配置文档
#listener.security.protocol.map=PLAINTEXT:PLAINTEXT,SSL:SSL,SASL_PLAINTEXT:SASL_PLAINTEXT,SASL_SSL:SASL_SSL
# The number of threads that the server uses for receiving requests from the network and sending responses to the network
# 服务器用来接受请求或者发送响应的线程数
num.network.threads=3
# The number of threads that the server uses for processing requests, which may include disk I/O
# 服务器用来处理请求的线程数，可能包括磁盘IO
num.io.threads=8
# The send buffer (SO_SNDBUF) used by the socket server
# 套接字服务器使用的发送缓冲区大小
socket.send.buffer.bytes=102400
# The receive buffer (SO_RCVBUF) used by the socket server
# 套接字服务器使用的接收缓冲区大小
socket.receive.buffer.bytes=102400
# The maximum size of a request that the socket server will accept (protection against OOM)
# 单个请求最大能接收的数据量
socket.request.max.bytes=104857600
############################# Log Basics #############################
# A comma seperated list of directories under which to store log files
# 一个逗号分隔的目录列表，用来存储日志文件
log.dirs=/tmp/kafka-logs
# The default number of log partitions per topic. More partitions allow greater
# parallelism for consumption, but this will also result in more files across
# the brokers.
# 每个主题的日志分区的默认数量。更多的分区允许更大的并行操作，但是它会导致节点产生更多的文件
num.partitions=1
# The number of threads per data directory to be used for log recovery at startup and flushing at shutdown.
# This value is recommended to be increased for installations with data dirs located in RAID array.
# 每个数据目录中的线程数，用于在启动时日志恢复，并在关闭时刷新。
num.recovery.threads.per.data.dir=1
############################# Internal Topic Settings #############################
# 内部主题设置
# The replication factor for the group metadata internal topics "__consumer_offsets" and "__transaction_state"
# For anything other than development testing, a value greater than 1 is recommended for to ensure availability such as 3.
# 对于除了开发测试之外的其他任何东西，group元数据内部主题的复制因子“__consumer_offsets”和“__transaction_state”，建议值大于1，以确保可用性(如3)。
offsets.topic.replication.factor=1
transaction.state.log.replication.factor=1
transaction.state.log.min.isr=1
############################# Log Flush Policy #############################
# Messages are immediately written to the filesystem but by default we only fsync() to sync
# the OS cache lazily. The following configurations control the flush of data to disk.
# 消息直接被写入文件系统，但是默认情况下我们仅仅调用fsync()以延迟的同步系统缓存
# There are a few important trade-offs here:
# 这些有一些重要的权衡
# 1. Durability: Unflushed data may be lost if you are not using replication.
# 2. Latency: Very large flush intervals may lead to latency spikes when the flush does occur as there will be a lot of data to flush.
# 3. Throughput: The flush is generally the most expensive operation, and a small flush interval may lead to exceessive seeks.
# 1. 持久性:如果不使用复制，未刷新的数据可能会丢失。
# 2. 延迟:非常大的刷新间隔可能会在刷新时导致延迟，因为将会有大量数据刷新。
# 3. 吞吐量:刷新通常是最昂贵的操作，而一个小的刷新间隔可能会导致过多的搜索。
# The settings below allow one to configure the flush policy to flush data after a period of time or
# every N messages (or both). This can be done globally and overridden on a per-topic basis.
# 下面的设置允许你去配置刷新策略，每隔一段时间刷新或者一次N个消息（或者两个都配置）。这可以在全局范围内完成，并在每个主题的基础上重写。
# The number of messages to accept before forcing a flush of data to disk
# 在强制刷新数据到磁盘之前允许接收消息的数量
#log.flush.interval.messages=10000
# The maximum amount of time a message can sit in a log before we force a flush
# 在强制刷新之前，消息可以在日志中停留的最长时间
#log.flush.interval.ms=1000
############################# Log Retention Policy #############################
# The following configurations control the disposal of log segments. The policy can
# be set to delete segments after a period of time, or after a given size has accumulated.
# 以下的配置控制了日志段的处理。策略可以配置为每隔一段时间删除片段或者到达一定大小之后。
# A segment will be deleted whenever *either* of these criteria are met. Deletion always happens
# from the end of the log.
# 当满足这些条件时，将会删除一个片段。删除总是发生在日志的末尾。
# The minimum age of a log file to be eligible for deletion
# 一个日志的最小存活时间，可以被删除
log.retention.hours=168
# A size-based retention policy for logs. Segments are pruned from the log as long as the remaining
# segments don't drop below log.retention.bytes.
# 一个基于大小的日志保留策略。段将被从日志中删除只要剩下的部分段不低于log.retention.bytes。
#log.retention.bytes=1073741824
# The maximum size of a log segment file. When this size is reached a new log segment will be created.
# 每一个日志段大小的最大值。当到达这个大小时，会生成一个新的片段。
log.segment.bytes=1073741824
# The interval at which log segments are checked to see if they can be deleted according
# to the retention policies
# 检查日志段的时间间隔，看是否可以根据保留策略删除它们
log.retention.check.interval.ms=300000
############################# Zookeeper #############################
# Zookeeper connection string (see zookeeper docs for details).
# Zookeeper连接字符串（具体见Zookeeper文档）
# This is a comma separated host:port pairs, each corresponding to a zk
# 这是一个以逗号为分割的部分，每一个都匹配一个Zookeeper
# server. e.g. "127.0.0.1:3000,127.0.0.1:3001,127.0.0.1:3002".
# You can also append an optional chroot string to the urls to specify the
# root directory for all kafka znodes.
# 您还可以将一个可选的chroot字符串附加到url，以指定所有kafka znode的根目录。
zookeeper.connect=localhost:2181
# Timeout in ms for connecting to zookeeper
# 连接到Zookeeper的超时时间
zookeeper.connection.timeout.ms=6000
############################# Group Coordinator Settings #############################
# The following configuration specifies the time, in milliseconds, that the GroupCoordinator will delay the initial consumer rebalance.
# The rebalance will be further delayed by the value of group.initial.rebalance.delay.ms as new members join the group, up to a maximum of max.poll.interval.ms.
# The default value for this is 3 seconds.
# We override this to 0 here as it makes for a better out-of-the-box experience for development and testing.
# However, in production environments the default value of 3 seconds is more suitable as this will help to avoid unnecessary, and potentially expensive, rebalances during application startup.
group.initial.rebalance.delay.ms=0
小结
# Licensed to the Apache Software Foundation (ASF) under one or more
# contributor license agreements. See the NOTICE file distributed with
# this work for additional information regarding copyright ownership.
# The ASF licenses this file to You under the Apache License, Version 2.0
# (the "License"); you may not use this file except in compliance with
# the License. You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# see kafka.server.KafkaConfig for additional details and defaults ############################# Server Basics ############################# # The id of the broker. This must be set to a unique integer for each broker.
# 节点的ID，必须与其它节点不同
broker.id=0 ############################# Socket Server Settings ############################# listeners=PLAINTEXT://:9092 # The port the socket server listens on
# 监听端口
#port=9092 # Hostname the broker will bind to. If not set, the server will bind to all interfaces
# 节点需要绑定的主机名称。如果没有设置，服务器会绑定到所有接口
#host.name=localhost # Hostname the broker will advertise to producers and consumers. If not set, it uses the
# value for "host.name" if configured. Otherwise, it will use the value returned from
# java.net.InetAddress.getCanonicalHostName().
# 节点的主机名会通知给生产者和消费者。如果没有设置，它将会使用"host.name"的值（前提是设置了host.name）。
# 否则他会使用java.net.InetAddress.getCanonicalHostName()的返回值
#advertised.host.name=<hostname routable by clients> # The port to publish to ZooKeeper for clients to use. If this is not set,
# it will publish the same port that the broker binds to.
# 这个端口将暴露给Zookeeper以供客户端来使用。如果没有设置，将会暴露节点绑定的端口
#advertised.port=<port accessible by clients> # The number of threads handling network requests
# 接受网络请求的线程数
num.network.threads=3 # The number of threads doing disk I/O、
# 进行磁盘IO的线程数
num.io.threads=8 # The send buffer (SO_SNDBUF) used by the socket server
# 套接字服务器使用的发送缓冲区大小
socket.send.buffer.bytes=102400 # The receive buffer (SO_RCVBUF) used by the socket server
# 套接字服务器使用的接收缓冲区大小
socket.receive.buffer.bytes=102400 # The maximum size of a request that the socket server will accept (protection against OOM)
# 单个请求最大能接收的数据量
socket.request.max.bytes=104857600 ############################# Log Basics ############################# # A comma seperated list of directories under which to store log files
# 一个逗号分隔的目录列表，用来存储日志文件
log.dirs=/tmp/kafka-logs # The default number of log partitions per topic. More partitions allow greater
# parallelism for consumption, but this will also result in more files across
# the brokers.
# 每个主题的日志分区的默认数量。更多的分区允许更大的并行操作，但是它会导致节点产生更多的文件
num.partitions=1 # The number of threads per data directory to be used for log recovery at startup and flushing at shutdown.
# This value is recommended to be increased for installations with data dirs located in RAID array.
# 每个数据目录中的线程数，用于在启动时日志恢复，并在关闭时刷新。
num.recovery.threads.per.data.dir=1 ############################# Log Flush Policy ############################# # Messages are immediately written to the filesystem but by default we only fsync() to sync
# the OS cache lazily. The following configurations control the flush of data to disk.
# 消息直接被写入文件系统，但是默认情况下我们仅仅调用fsync()以延迟的同步系统缓存
# There are a few important trade-offs here:
# 这些有一些重要的权衡
# 1. Durability: Unflushed data may be lost if you are not using replication.
# 2. Latency: Very large flush intervals may lead to latency spikes when the flush does occur as there will be a lot of data to flush.
# 3. Throughput: The flush is generally the most expensive operation, and a small flush interval may lead to exceessive seeks.
# 1. 持久性:如果不使用复制，未刷新的数据可能会丢失。
# 2. 延迟:非常大的刷新间隔可能会在刷新时导致延迟，因为将会有大量数据刷新。
# 3. 吞吐量:刷新通常是最昂贵的操作，而一个小的刷新间隔可能会导致过多的搜索。
# The settings below allow one to configure the flush policy to flush data after a period of time or
# every N messages (or both). This can be done globally and overridden on a per-topic basis.
# 下面的设置允许你去配置刷新策略，每隔一段时间刷新或者一次N个消息（或者两个都配置）。这可以在全局范围内完成，并在每个主题的基础上重写。 # The number of messages to accept before forcing a flush of data to disk
# 在强制刷新数据到磁盘执勤啊允许接收消息的数量
#log.flush.interval.messages=10000 # The maximum amount of time a message can sit in a log before we force a flush
# 在强制刷新之前，消息可以在日志中停留的最长时间
#log.flush.interval.ms=1000 ############################# Log Retention Policy ############################# # The following configurations control the disposal of log segments. The policy can
# be set to delete segments after a period of time, or after a given size has accumulated.
# 以下的配置控制了日志段的处理。策略可以配置为每隔一段时间删除片段或者到达一定大小之后。
# A segment will be deleted whenever *either* of these criteria are met. Deletion always happens
# from the end of the log.
# 当满足这些条件时，将会删除一个片段。删除总是发生在日志的末尾。 # The minimum age of a log file to be eligible for deletion
# 一个日志的最小存活时间，可以被删除
log.retention.hours=168 # A size-based retention policy for logs. Segments are pruned from the log as long as the remaining
# segments don't drop below log.retention.bytes.
# 一个基于大小的日志保留策略。段将被从日志中删除只要剩下的部分段不低于log.retention.bytes。
#log.retention.bytes=1073741824 # The maximum size of a log segment file. When this size is reached a new log segment will be created.
# 每一个日志段大小的最大值。当到达这个大小时，会生成一个新的片段。
log.segment.bytes=1073741824 # The interval at which log segments are checked to see if they can be deleted according
# to the retention policies
# 检查日志段的时间间隔，看是否可以根据保留策略删除它们
log.retention.check.interval.ms=300000 ############################# Zookeeper ############################# # Zookeeper connection string (see zookeeper docs for details).
# Zookeeper连接字符串（具体见Zookeeper文档）
# This is a comma separated host:port pairs, each corresponding to a zk
# 这是一个以逗号为分割的部分，每一个都匹配一个Zookeeper
# server. e.g. "127.0.0.1:3000,127.0.0.1:3001,127.0.0.1:3002".
# You can also append an optional chroot string to the urls to specify the
# root directory for all kafka znodes.
# 您还可以将一个可选的chroot字符串附加到url，以指定所有kafka znode的根目录。
zookeeper.connect=localhost:2181 # Timeout in ms for connecting to zookeeper
# 连接到Zookeeper的超时时间
zookeeper.connection.timeout.ms=6000
# Licensed to the Apache Software Foundation (ASF) under one or more
# contributor license agreements. See the NOTICE file distributed with
# this work for additional information regarding copyright ownership.
# The ASF licenses this file to You under the Apache License, Version 2.0
# (the "License"); you may not use this file except in compliance with
# the License. You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License. # see kafka.server.KafkaConfig for additional details and defaults ############################# Server Basics ############################# # The id of the broker. This must be set to a unique integer for each broker.
# 节点的ID，必须与其它节点不同
broker.id=0 # Switch to enable topic deletion or not, default value is false
# 选择启用删除主题功能，默认false
#delete.topic.enable=true ############################# Socket Server Settings ############################# # The address the socket server listens on. It will get the value returned from
# java.net.InetAddress.getCanonicalHostName() if not configured.
# 套接字服务器坚挺的地址。如果没有配置，就使用java.net.InetAddress.getCanonicalHostName()的返回值
# FORMAT:格式：
# listeners = security_protocol://host_name:port
# EXAMPLE:例子：
# listeners = PLAINTEXT://your.host.name:9092
#listeners=PLAINTEXT://:9092 # Hostname and port the broker will advertise to producers and consumers. If not set,
# it uses the value for "listeners" if configured. Otherwise, it will use the value
# returned from java.net.InetAddress.getCanonicalHostName().
# 节点的主机名会通知给生产者和消费者。如果没有设置，如果配置了"listeners"就使用"listeners"的值。
# 否则就使用java.net.InetAddress.getCanonicalHostName()的返回值
#advertised.listeners=PLAINTEXT://your.host.name:9092 # The number of threads handling network requests
# 接受网络请求的线程数
num.network.threads=3 # The number of threads doing disk I/O
# 进行磁盘IO的线程数
num.io.threads=8 # The send buffer (SO_SNDBUF) used by the socket server
# 套接字服务器使用的发送缓冲区大小
socket.send.buffer.bytes=102400 # The receive buffer (SO_RCVBUF) used by the socket server
# 套接字服务器使用的接收缓冲区大小
socket.receive.buffer.bytes=102400 # The maximum size of a request that the socket server will accept (protection against OOM)
# 单个请求最大能接收的数据量
socket.request.max.bytes=104857600 ############################# Log Basics ############################# # A comma seperated list of directories under which to store log files
# 一个逗号分隔的目录列表，用来存储日志文件
log.dirs=/tmp/kafka-logs # The default number of log partitions per topic. More partitions allow greater
# parallelism for consumption, but this will also result in more files across
# the brokers.
# 每个主题的日志分区的默认数量。更多的分区允许更大的并行操作，但是它会导致节点产生更多的文件
num.partitions=1 # The number of threads per data directory to be used for log recovery at startup and flushing at shutdown.
# This value is recommended to be increased for installations with data dirs located in RAID array.
# 每个数据目录中的线程数，用于在启动时日志恢复，并在关闭时刷新。
num.recovery.threads.per.data.dir=1 ############################# Log Flush Policy ############################# # Messages are immediately written to the filesystem but by default we only fsync() to sync
# the OS cache lazily. The following configurations control the flush of data to disk.
# 消息直接被写入文件系统，但是默认情况下我们仅仅调用fsync()以延迟的同步系统缓存
# There are a few important trade-offs here:
# 这些有一些重要的权衡
# 1. Durability: Unflushed data may be lost if you are not using replication.
# 2. Latency: Very large flush intervals may lead to latency spikes when the flush does occur as there will be a lot of data to flush.
# 3. Throughput: The flush is generally the most expensive operation, and a small flush interval may lead to exceessive seeks.
# 1. 持久性:如果不使用复制，未刷新的数据可能会丢失。
# 2. 延迟:非常大的刷新间隔可能会在刷新时导致延迟，因为将会有大量数据刷新。
# 3. 吞吐量:刷新通常是最昂贵的操作，而一个小的刷新间隔可能会导致过多的搜索。
# The settings below allow one to configure the flush policy to flush data after a period of time or
# every N messages (or both). This can be done globally and overridden on a per-topic basis.
# 下面的设置允许你去配置刷新策略，每隔一段时间刷新或者一次N个消息（或者两个都配置）。这可以在全局范围内完成，并在每个主题的基础上重写。 # The number of messages to accept before forcing a flush of data to disk
# 在强制刷新数据到磁盘之前允许接收消息的数量
#log.flush.interval.messages=10000 # The maximum amount of time a message can sit in a log before we force a flush
# 在强制刷新之前，消息可以在日志中停留的最长时间
#log.flush.interval.ms=1000 ############################# Log Retention Policy ############################# # The following configurations control the disposal of log segments. The policy can
# be set to delete segments after a period of time, or after a given size has accumulated.
# 以下的配置控制了日志段的处理。策略可以配置为每隔一段时间删除片段或者到达一定大小之后。
# A segment will be deleted whenever *either* of these criteria are met. Deletion always happens
# from the end of the log.
# 当满足这些条件时，将会删除一个片段。删除总是发生在日志的末尾。 # The minimum age of a log file to be eligible for deletion
# 一个日志的最小存活时间，可以被删除
log.retention.hours=168 # A size-based retention policy for logs. Segments are pruned from the log as long as the remaining
# segments don't drop below log.retention.bytes.
# 一个基于大小的日志保留策略。段将被从日志中删除只要剩下的部分段不低于log.retention.bytes。
#log.retention.bytes=1073741824 # The maximum size of a log segment file. When this size is reached a new log segment will be created.
# 每一个日志段大小的最大值。当到达这个大小时，会生成一个新的片段。
log.segment.bytes=1073741824 # The interval at which log segments are checked to see if they can be deleted according
# to the retention policies
# 检查日志段的时间间隔，看是否可以根据保留策略删除它们
log.retention.check.interval.ms=300000 ############################# Zookeeper ############################# # Zookeeper connection string (see zookeeper docs for details).
# Zookeeper连接字符串（具体见Zookeeper文档）
# This is a comma separated host:port pairs, each corresponding to a zk
# 这是一个以逗号为分割的部分，每一个都匹配一个Zookeeper
# server. e.g. "127.0.0.1:3000,127.0.0.1:3001,127.0.0.1:3002".
# You can also append an optional chroot string to the urls to specify the
# root directory for all kafka znodes.
# 您还可以将一个可选的chroot字符串附加到url，以指定所有kafka znode的根目录。
zookeeper.connect=localhost:2181 # Timeout in ms for connecting to zookeeper
# 连接到Zookeeper的超时时间
zookeeper.connection.timeout.ms=6000
0.11.0
# Licensed to the Apache Software Foundation (ASF) under one or more
# contributor license agreements. See the NOTICE file distributed with
# this work for additional information regarding copyright ownership.
# The ASF licenses this file to You under the Apache License, Version 2.0
# (the "License"); you may not use this file except in compliance with
# the License. You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# see kafka.server.KafkaConfig for additional details and defaults
############################# Server Basics #############################
# The id of the broker. This must be set to a unique integer for each broker.
# 节点的ID，必须与其它节点不同
broker.id=0
# Switch to enable topic deletion or not, default value is false
# 选择启用删除主题功能，默认false
#delete.topic.enable=true
############################# Socket Server Settings #############################
# The address the socket server listens on. It will get the value returned from
# java.net.InetAddress.getCanonicalHostName() if not configured.
# 套接字服务器坚挺的地址。如果没有配置，就使用java.net.InetAddress.getCanonicalHostName()的返回值
# FORMAT:
# listeners = listener_name://host_name:port
# EXAMPLE:
# listeners = PLAINTEXT://your.host.name:9092
#listeners=PLAINTEXT://:9092
# Hostname and port the broker will advertise to producers and consumers. If not set,
# it uses the value for "listeners" if configured. Otherwise, it will use the value
# returned from java.net.InetAddress.getCanonicalHostName().
# 节点的主机名会通知给生产者和消费者。如果没有设置，如果配置了"listeners"就使用"listeners"的值。
# 否则就使用java.net.InetAddress.getCanonicalHostName()的返回值
#advertised.listeners=PLAINTEXT://your.host.name:9092
# Maps listener names to security protocols, the default is for them to be the same. See the config documentation for more details
# 将侦听器的名称映射到安全协议，默认情况下它们是相同的。有关详细信息，请参阅配置文档
#listener.security.protocol.map=PLAINTEXT:PLAINTEXT,SSL:SSL,SASL_PLAINTEXT:SASL_PLAINTEXT,SASL_SSL:SASL_SSL
# The number of threads that the server uses for receiving requests from the network and sending responses to the network
# 服务器用来接受请求或者发送响应的线程数
num.network.threads=3
# The number of threads that the server uses for processing requests, which may include disk I/O
# 服务器用来处理请求的线程数，可能包括磁盘IO
num.io.threads=8
# The send buffer (SO_SNDBUF) used by the socket server
# 套接字服务器使用的发送缓冲区大小
socket.send.buffer.bytes=102400
# The receive buffer (SO_RCVBUF) used by the socket server
# 套接字服务器使用的接收缓冲区大小
socket.receive.buffer.bytes=102400
# The maximum size of a request that the socket server will accept (protection against OOM)
# 单个请求最大能接收的数据量
socket.request.max.bytes=104857600
############################# Log Basics #############################
# A comma seperated list of directories under which to store log files
# 一个逗号分隔的目录列表，用来存储日志文件
log.dirs=/tmp/kafka-logs
# The default number of log partitions per topic. More partitions allow greater
# parallelism for consumption, but this will also result in more files across
# the brokers.
# 每个主题的日志分区的默认数量。更多的分区允许更大的并行操作，但是它会导致节点产生更多的文件
num.partitions=1
# The number of threads per data directory to be used for log recovery at startup and flushing at shutdown.
# This value is recommended to be increased for installations with data dirs located in RAID array.
# 每个数据目录中的线程数，用于在启动时日志恢复，并在关闭时刷新。
num.recovery.threads.per.data.dir=1
############################# Internal Topic Settings #############################
# 内部主题设置
# The replication factor for the group metadata internal topics "__consumer_offsets" and "__transaction_state"
# For anything other than development testing, a value greater than 1 is recommended for to ensure availability such as 3.
# 对于除了开发测试之外的其他任何东西，group元数据内部主题的复制因子“__consumer_offsets”和“__transaction_state”，建议值大于1，以确保可用性(如3)。
offsets.topic.replication.factor=1
transaction.state.log.replication.factor=1
transaction.state.log.min.isr=1
############################# Log Flush Policy #############################
# Messages are immediately written to the filesystem but by default we only fsync() to sync
# the OS cache lazily. The following configurations control the flush of data to disk.
# 消息直接被写入文件系统，但是默认情况下我们仅仅调用fsync()以延迟的同步系统缓存
# There are a few important trade-offs here:
# 这些有一些重要的权衡
# 1. Durability: Unflushed data may be lost if you are not using replication.
# 2. Latency: Very large flush intervals may lead to latency spikes when the flush does occur as there will be a lot of data to flush.
# 3. Throughput: The flush is generally the most expensive operation, and a small flush interval may lead to exceessive seeks.
# 1. 持久性:如果不使用复制，未刷新的数据可能会丢失。
# 2. 延迟:非常大的刷新间隔可能会在刷新时导致延迟，因为将会有大量数据刷新。
# 3. 吞吐量:刷新通常是最昂贵的操作，而一个小的刷新间隔可能会导致过多的搜索。
# The settings below allow one to configure the flush policy to flush data after a period of time or
# every N messages (or both). This can be done globally and overridden on a per-topic basis.
# 下面的设置允许你去配置刷新策略，每隔一段时间刷新或者一次N个消息（或者两个都配置）。这可以在全局范围内完成，并在每个主题的基础上重写。
# The number of messages to accept before forcing a flush of data to disk
# 在强制刷新数据到磁盘之前允许接收消息的数量
#log.flush.interval.messages=10000
# The maximum amount of time a message can sit in a log before we force a flush
# 在强制刷新之前，消息可以在日志中停留的最长时间
#log.flush.interval.ms=1000
############################# Log Retention Policy #############################
# The following configurations control the disposal of log segments. The policy can
# be set to delete segments after a period of time, or after a given size has accumulated.
# 以下的配置控制了日志段的处理。策略可以配置为每隔一段时间删除片段或者到达一定大小之后。
# A segment will be deleted whenever *either* of these criteria are met. Deletion always happens
# from the end of the log.
# 当满足这些条件时，将会删除一个片段。删除总是发生在日志的末尾。
# The minimum age of a log file to be eligible for deletion
# 一个日志的最小存活时间，可以被删除
log.retention.hours=168
# A size-based retention policy for logs. Segments are pruned from the log as long as the remaining
# segments don't drop below log.retention.bytes.
# 一个基于大小的日志保留策略。段将被从日志中删除只要剩下的部分段不低于log.retention.bytes。
#log.retention.bytes=1073741824
# The maximum size of a log segment file. When this size is reached a new log segment will be created.
# 每一个日志段大小的最大值。当到达这个大小时，会生成一个新的片段。
log.segment.bytes=1073741824
# The interval at which log segments are checked to see if they can be deleted according
# to the retention policies
# 检查日志段的时间间隔，看是否可以根据保留策略删除它们
log.retention.check.interval.ms=300000
############################# Zookeeper #############################
# Zookeeper connection string (see zookeeper docs for details).
# Zookeeper连接字符串（具体见Zookeeper文档）
# This is a comma separated host:port pairs, each corresponding to a zk
# 这是一个以逗号为分割的部分，每一个都匹配一个Zookeeper
# server. e.g. "127.0.0.1:3000,127.0.0.1:3001,127.0.0.1:3002".
# You can also append an optional chroot string to the urls to specify the
# root directory for all kafka znodes.
# 您还可以将一个可选的chroot字符串附加到url，以指定所有kafka znode的根目录。
zookeeper.connect=localhost:2181
# Timeout in ms for connecting to zookeeper
# 连接到Zookeeper的超时时间
zookeeper.connection.timeout.ms=6000
############################# Group Coordinator Settings #############################
# The following configuration specifies the time, in milliseconds, that the GroupCoordinator will delay the initial consumer rebalance.
# The rebalance will be further delayed by the value of group.initial.rebalance.delay.ms as new members join the group, up to a maximum of max.poll.interval.ms.
# The default value for this is 3 seconds.
# We override this to 0 here as it makes for a better out-of-the-box experience for development and testing.
# However, in production environments the default value of 3 seconds is more suitable as this will help to avoid unnecessary, and potentially expensive, rebalances during application startup.
group.initial.rebalance.delay.ms=0
小结
# Licensed to the Apache Software Foundation (ASF) under one or more
# contributor license agreements. See the NOTICE file distributed with
# this work for additional information regarding copyright ownership.
# The ASF licenses this file to You under the Apache License, Version 2.0
# (the "License"); you may not use this file except in compliance with
# the License. You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License. # see kafka.server.KafkaConfig for additional details and defaults ############################# Server Basics ############################# # The id of the broker. This must be set to a unique integer for each broker.
# 节点的ID，必须与其它节点不同
broker.id=0 # Switch to enable topic deletion or not, default value is false
# 选择启用删除主题功能，默认false
#delete.topic.enable=true ############################# Socket Server Settings ############################# # The address the socket server listens on. It will get the value returned from
# java.net.InetAddress.getCanonicalHostName() if not configured.
# 套接字服务器坚挺的地址。如果没有配置，就使用java.net.InetAddress.getCanonicalHostName()的返回值
# FORMAT:
# listeners = listener_name://host_name:port
# EXAMPLE:
# listeners = PLAINTEXT://your.host.name:9092
#listeners=PLAINTEXT://:9092 # Hostname and port the broker will advertise to producers and consumers. If not set,
# it uses the value for "listeners" if configured. Otherwise, it will use the value
# returned from java.net.InetAddress.getCanonicalHostName().
# 节点的主机名会通知给生产者和消费者。如果没有设置，如果配置了"listeners"就使用"listeners"的值。
# 否则就使用java.net.InetAddress.getCanonicalHostName()的返回值
#advertised.listeners=PLAINTEXT://your.host.name:9092 # Maps listener names to security protocols, the default is for them to be the same. See the config documentation for more details
# 将侦听器的名称映射到安全协议，默认情况下它们是相同的。有关详细信息，请参阅配置文档
#listener.security.protocol.map=PLAINTEXT:PLAINTEXT,SSL:SSL,SASL_PLAINTEXT:SASL_PLAINTEXT,SASL_SSL:SASL_SSL # The number of threads that the server uses for receiving requests from the network and sending responses to the network
# 服务器用来接受请求或者发送响应的线程数
num.network.threads=3 # The number of threads that the server uses for processing requests, which may include disk I/O
# 服务器用来处理请求的线程数，可能包括磁盘IO
num.io.threads=8 # The send buffer (SO_SNDBUF) used by the socket server
# 套接字服务器使用的发送缓冲区大小
socket.send.buffer.bytes=102400 # The receive buffer (SO_RCVBUF) used by the socket server
# 套接字服务器使用的接收缓冲区大小
socket.receive.buffer.bytes=102400 # The maximum size of a request that the socket server will accept (protection against OOM)
# 单个请求最大能接收的数据量
socket.request.max.bytes=104857600 ############################# Log Basics ############################# # A comma seperated list of directories under which to store log files
# 一个逗号分隔的目录列表，用来存储日志文件
log.dirs=/tmp/kafka-logs # The default number of log partitions per topic. More partitions allow greater
# parallelism for consumption, but this will also result in more files across
# the brokers.
# 每个主题的日志分区的默认数量。更多的分区允许更大的并行操作，但是它会导致节点产生更多的文件
num.partitions=1 # The number of threads per data directory to be used for log recovery at startup and flushing at shutdown.
# This value is recommended to be increased for installations with data dirs located in RAID array.
# 每个数据目录中的线程数，用于在启动时日志恢复，并在关闭时刷新。
num.recovery.threads.per.data.dir=1 ############################# Internal Topic Settings #############################
# 内部主题设置
# The replication factor for the group metadata internal topics "__consumer_offsets" and "__transaction_state"
# For anything other than development testing, a value greater than 1 is recommended for to ensure availability such as 3.
# 对于除了开发测试之外的其他任何东西，group元数据内部主题的复制因子“__consumer_offsets”和“__transaction_state”，建议值大于1，以确保可用性(如3)。
offsets.topic.replication.factor=1
transaction.state.log.replication.factor=1
transaction.state.log.min.isr=1 ############################# Log Flush Policy ############################# # Messages are immediately written to the filesystem but by default we only fsync() to sync
# the OS cache lazily. The following configurations control the flush of data to disk.
# 消息直接被写入文件系统，但是默认情况下我们仅仅调用fsync()以延迟的同步系统缓存
# There are a few important trade-offs here:
# 这些有一些重要的权衡
# 1. Durability: Unflushed data may be lost if you are not using replication.
# 2. Latency: Very large flush intervals may lead to latency spikes when the flush does occur as there will be a lot of data to flush.
# 3. Throughput: The flush is generally the most expensive operation, and a small flush interval may lead to exceessive seeks.
# 1. 持久性:如果不使用复制，未刷新的数据可能会丢失。
# 2. 延迟:非常大的刷新间隔可能会在刷新时导致延迟，因为将会有大量数据刷新。
# 3. 吞吐量:刷新通常是最昂贵的操作，而一个小的刷新间隔可能会导致过多的搜索。
# The settings below allow one to configure the flush policy to flush data after a period of time or
# every N messages (or both). This can be done globally and overridden on a per-topic basis.
# 下面的设置允许你去配置刷新策略，每隔一段时间刷新或者一次N个消息（或者两个都配置）。这可以在全局范围内完成，并在每个主题的基础上重写。 # The number of messages to accept before forcing a flush of data to disk
# 在强制刷新数据到磁盘之前允许接收消息的数量
#log.flush.interval.messages=10000 # The maximum amount of time a message can sit in a log before we force a flush
# 在强制刷新之前，消息可以在日志中停留的最长时间
#log.flush.interval.ms=1000 ############################# Log Retention Policy ############################# # The following configurations control the disposal of log segments. The policy can
# be set to delete segments after a period of time, or after a given size has accumulated.
# 以下的配置控制了日志段的处理。策略可以配置为每隔一段时间删除片段或者到达一定大小之后。
# A segment will be deleted whenever *either* of these criteria are met. Deletion always happens
# from the end of the log.
# 当满足这些条件时，将会删除一个片段。删除总是发生在日志的末尾。 # The minimum age of a log file to be eligible for deletion
# 一个日志的最小存活时间，可以被删除
log.retention.hours=168 # A size-based retention policy for logs. Segments are pruned from the log as long as the remaining
# segments don't drop below log.retention.bytes.
# 一个基于大小的日志保留策略。段将被从日志中删除只要剩下的部分段不低于log.retention.bytes。
#log.retention.bytes=1073741824 # The maximum size of a log segment file. When this size is reached a new log segment will be created.
# 每一个日志段大小的最大值。当到达这个大小时，会生成一个新的片段。
log.segment.bytes=1073741824 # The interval at which log segments are checked to see if they can be deleted according
# to the retention policies
# 检查日志段的时间间隔，看是否可以根据保留策略删除它们
log.retention.check.interval.ms=300000 ############################# Zookeeper ############################# # Zookeeper connection string (see zookeeper docs for details).
# Zookeeper连接字符串（具体见Zookeeper文档）
# This is a comma separated host:port pairs, each corresponding to a zk
# 这是一个以逗号为分割的部分，每一个都匹配一个Zookeeper
# server. e.g. "127.0.0.1:3000,127.0.0.1:3001,127.0.0.1:3002".
# You can also append an optional chroot string to the urls to specify the
# root directory for all kafka znodes.
# 您还可以将一个可选的chroot字符串附加到url，以指定所有kafka znode的根目录。
zookeeper.connect=localhost:2181 # Timeout in ms for connecting to zookeeper
# 连接到Zookeeper的超时时间
zookeeper.connection.timeout.ms=6000 ############################# Group Coordinator Settings ############################# # The following configuration specifies the time, in milliseconds, that the GroupCoordinator will delay the initial consumer rebalance.
# The rebalance will be further delayed by the value of group.initial.rebalance.delay.ms as new members join the group, up to a maximum of max.poll.interval.ms.
# The default value for this is 3 seconds.
# We override this to 0 here as it makes for a better out-of-the-box experience for development and testing.
# However, in production environments the default value of 3 seconds is more suitable as this will help to avoid unnecessary, and potentially expensive, rebalances during application startup.
group.initial.rebalance.delay.ms=0
可以看出，目前最新版本的配置文件没有了
#port=9092 #host.name=localhost #advertised.host.name=<hostname routable by clients> #advertised.port=<port accessible by clients>
取而代之的是
#listeners=PLAINTEXT://:9092 #advertised.listeners=PLAINTEXT://your.host.name:9092
并且新增了一些配置，以及有些地方注释的说明更详细。
=====================2020.4.15更新=====================
1.1.1、2.0.0、2.1.1、2.2.0、2.3.0、2.4.1
# Licensed to the Apache Software Foundation (ASF) under one or more
# contributor license agreements. See the NOTICE file distributed with
# this work for additional information regarding copyright ownership.
# The ASF licenses this file to You under the Apache License, Version 2.0
# (the "License"); you may not use this file except in compliance with
# the License. You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# see kafka.server.KafkaConfig for additional details and defaults
############################# Server Basics #############################
# The id of the broker. This must be set to a unique integer for each broker.
# 节点的ID，必须与其它节点不同
broker.id=0
############################# Socket Server Settings #############################
# The address the socket server listens on. It will get the value returned from
# java.net.InetAddress.getCanonicalHostName() if not configured.
# FORMAT:
# listeners = listener_name://host_name:port
# EXAMPLE:
# listeners = PLAINTEXT://your.host.name:9092
# 套接字服务器监听的地址。如果没有配置，就使用java.net.InetAddress.getCanonicalHostName()的返回值
#listeners=PLAINTEXT://:9092
# Hostname and port the broker will advertise to producers and consumers. If not set,
# it uses the value for "listeners" if configured. Otherwise, it will use the value
# returned from java.net.InetAddress.getCanonicalHostName().
#advertised.listeners=PLAINTEXT://your.host.name:9092
# Maps listener names to security protocols, the default is for them to be the same. See the config documentation for more details
#listener.security.protocol.map=PLAINTEXT:PLAINTEXT,SSL:SSL,SASL_PLAINTEXT:SASL_PLAINTEXT,SASL_SSL:SASL_SSL
# The number of threads that the server uses for receiving requests from the network and sending responses to the network
# 接受网络请求的线程数
num.network.threads=3
# The number of threads that the server uses for processing requests, which may include disk I/O
# 进行磁盘IO的线程数
num.io.threads=8
# The send buffer (SO_SNDBUF) used by the socket server
# 套接字服务器使用的发送缓冲区大小
socket.send.buffer.bytes=102400
# The receive buffer (SO_RCVBUF) used by the socket server
# 套接字服务器使用的接收缓冲区大小
socket.receive.buffer.bytes=102400
# The maximum size of a request that the socket server will accept (protection against OOM)
# 单个请求最大能接收的数据量
socket.request.max.bytes=104857600
############################# Log Basics #############################
# A comma separated list of directories under which to store log files
# 一个逗号分隔的目录列表，用来存储日志文件
log.dirs=/tmp/kafka-logs
# The default number of log partitions per topic. More partitions allow greater
# parallelism for consumption, but this will also result in more files across
# the brokers.
# 每个主题的日志分区的默认数量。更多的分区允许更大的并行操作，但是它会导致节点产生更多的文件
num.partitions=1
# The number of threads per data directory to be used for log recovery at startup and flushing at shutdown.
# This value is recommended to be increased for installations with data dirs located in RAID array.
# 每个数据目录中的线程数，用于在启动时日志恢复，并在关闭时刷新。
num.recovery.threads.per.data.dir=1
############################# Internal Topic Settings #############################
# The replication factor for the group metadata internal topics "__consumer_offsets" and "__transaction_state"
# 内部主题“_consumer_offsets”和“_transaction_state”的复制因子
# For anything other than development testing, a value greater than 1 is recommended for to ensure availability such as 3.
# 对于开发测试以外的任何情况，建议使用大于1的值来确保可用性，比如3。
offsets.topic.replication.factor=1
transaction.state.log.replication.factor=1
transaction.state.log.min.isr=1
############################# Log Flush Policy #############################
# Messages are immediately written to the filesystem but by default we only fsync() to sync
# the OS cache lazily. The following configurations control the flush of data to disk.
# 消息直接被写入文件系统，但是默认情况下我们仅仅调用fsync()以延迟的同步系统缓存
# There are a few important trade-offs here:
# 这些有一些重要的权衡
# 1. Durability: Unflushed data may be lost if you are not using replication.
# 2. Latency: Very large flush intervals may lead to latency spikes when the flush does occur as there will be a lot of data to flush.
# 3. Throughput: The flush is generally the most expensive operation, and a small flush interval may lead to excessive seeks.
# 1. 持久性:如果不使用复制，未刷新的数据可能会丢失。
# 2. 延迟:非常大的刷新间隔可能会在刷新时导致延迟，因为将会有大量数据刷新。
# 3. 吞吐量:刷新通常是最昂贵的操作，而一个小的刷新间隔可能会导致过多的搜索。
# The settings below allow one to configure the flush policy to flush data after a period of time or
# every N messages (or both). This can be done globally and overridden on a per-topic basis.
# 下面的设置允许你去配置刷新策略，每隔一段时间刷新或者一次N个消息（或者两个都配置）。这可以在全局范围内完成，并在每个主题的基础上重写。
# The number of messages to accept before forcing a flush of data to disk
# 在强制刷新数据到磁盘之前允许接收消息的数量
#log.flush.interval.messages=10000
# The maximum amount of time a message can sit in a log before we force a flush
# 在强制刷新之前，消息可以在日志中停留的最长时间
#log.flush.interval.ms=1000
############################# Log Retention Policy #############################
# The following configurations control the disposal of log segments. The policy can
# be set to delete segments after a period of time, or after a given size has accumulated.
# 以下的配置控制了日志段的处理。策略可以配置为每隔一段时间删除片段或者到达一定大小之后。
# A segment will be deleted whenever *either* of these criteria are met. Deletion always happens
# from the end of the log.
# 当满足这些条件时，将会删除一个片段。删除总是发生在日志的末尾。
# The minimum age of a log file to be eligible for deletion due to age
# 一个日志的最小存活时间
log.retention.hours=168
# A size-based retention policy for logs. Segments are pruned from the log unless the remaining
# segments drop below log.retention.bytes. Functions independently of log.retention.hours.
# 一个基于大小的日志保留策略。只要剩下的部分不低于log.retention.bytes，段将从日志中删除。
#log.retention.bytes=1073741824
# The maximum size of a log segment file. When this size is reached a new log segment will be created.
# 每一个日志段大小的最大值。当到达这个大小时，会生成一个新的片段。
log.segment.bytes=1073741824
# The interval at which log segments are checked to see if they can be deleted according
# to the retention policies
# 检查日志段的时间间隔，看是否可以根据保留策略删除它们
log.retention.check.interval.ms=300000
############################# Zookeeper #############################
# Zookeeper connection string (see zookeeper docs for details).
# This is a comma separated host:port pairs, each corresponding to a zk
# server. e.g. "127.0.0.1:3000,127.0.0.1:3001,127.0.0.1:3002".
# You can also append an optional chroot string to the urls to specify the
# root directory for all kafka znodes.
# 配置zookeeper地址，多个以逗号分隔，还可以在最后指定kafka存储的namespace：eg："127.0.0.1:3000,127.0.0.1:3001,127.0.0.1:3002/kafka"
zookeeper.connect=localhost:2181
# Timeout in ms for connecting to zookeeper
# 连接到Zookeeper的超时时间
zookeeper.connection.timeout.ms=6000
############################# Group Coordinator Settings #############################
# The following configuration specifies the time, in milliseconds, that the GroupCoordinator will delay the initial consumer rebalance.
# 指定GroupCoordinator延迟初始消费者再平衡的时间(以毫秒为单位)
# The rebalance will be further delayed by the value of group.initial.rebalance.delay.ms as new members join the group, up to a maximum of max.poll.interval.ms.
# The default value for this is 3 seconds.
# 默认值是3秒
# We override this to 0 here as it makes for a better out-of-the-box experience for development and testing.
# However, in production environments the default value of 3 seconds is more suitable as this will help to avoid unnecessary, and potentially expensive, rebalances during application startup.
# 在生产环境中，3秒的默认值更合适
group.initial.rebalance.delay.ms=0
# Licensed to the Apache Software Foundation (ASF) under one or more
# contributor license agreements. See the NOTICE file distributed with
# this work for additional information regarding copyright ownership.
# The ASF licenses this file to You under the Apache License, Version 2.0
# (the "License"); you may not use this file except in compliance with
# the License. You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License. # see kafka.server.KafkaConfig for additional details and defaults ############################# Server Basics ############################# # The id of the broker. This must be set to a unique integer for each broker.
# 节点的ID，必须与其它节点不同
broker.id=0 ############################# Socket Server Settings ############################# # The address the socket server listens on. It will get the value returned from
# java.net.InetAddress.getCanonicalHostName() if not configured.
# FORMAT:
# listeners = listener_name://host_name:port
# EXAMPLE:
# listeners = PLAINTEXT://your.host.name:9092
# 套接字服务器监听的地址。如果没有配置，就使用java.net.InetAddress.getCanonicalHostName()的返回值
#listeners=PLAINTEXT://:9092 # Hostname and port the broker will advertise to producers and consumers. If not set,
# it uses the value for "listeners" if configured. Otherwise, it will use the value
# returned from java.net.InetAddress.getCanonicalHostName().
#advertised.listeners=PLAINTEXT://your.host.name:9092 # Maps listener names to security protocols, the default is for them to be the same. See the config documentation for more details
#listener.security.protocol.map=PLAINTEXT:PLAINTEXT,SSL:SSL,SASL_PLAINTEXT:SASL_PLAINTEXT,SASL_SSL:SASL_SSL # The number of threads that the server uses for receiving requests from the network and sending responses to the network
# 接受网络请求的线程数
num.network.threads=3 # The number of threads that the server uses for processing requests, which may include disk I/O
# 进行磁盘IO的线程数
num.io.threads=8 # The send buffer (SO_SNDBUF) used by the socket server
# 套接字服务器使用的发送缓冲区大小
socket.send.buffer.bytes=102400 # The receive buffer (SO_RCVBUF) used by the socket server
# 套接字服务器使用的接收缓冲区大小
socket.receive.buffer.bytes=102400 # The maximum size of a request that the socket server will accept (protection against OOM)
# 单个请求最大能接收的数据量
socket.request.max.bytes=104857600 ############################# Log Basics ############################# # A comma separated list of directories under which to store log files
# 一个逗号分隔的目录列表，用来存储日志文件
log.dirs=/tmp/kafka-logs # The default number of log partitions per topic. More partitions allow greater
# parallelism for consumption, but this will also result in more files across
# the brokers.
# 每个主题的日志分区的默认数量。更多的分区允许更大的并行操作，但是它会导致节点产生更多的文件
num.partitions=1 # The number of threads per data directory to be used for log recovery at startup and flushing at shutdown.
# This value is recommended to be increased for installations with data dirs located in RAID array.
# 每个数据目录中的线程数，用于在启动时日志恢复，并在关闭时刷新。
num.recovery.threads.per.data.dir=1 ############################# Internal Topic Settings #############################
# The replication factor for the group metadata internal topics "__consumer_offsets" and "__transaction_state"
# 内部主题“_consumer_offsets”和“_transaction_state”的复制因子
# For anything other than development testing, a value greater than 1 is recommended for to ensure availability such as 3.
# 对于开发测试以外的任何情况，建议使用大于1的值来确保可用性，比如3。
offsets.topic.replication.factor=1
transaction.state.log.replication.factor=1
transaction.state.log.min.isr=1 ############################# Log Flush Policy ############################# # Messages are immediately written to the filesystem but by default we only fsync() to sync
# the OS cache lazily. The following configurations control the flush of data to disk.
# 消息直接被写入文件系统，但是默认情况下我们仅仅调用fsync()以延迟的同步系统缓存
# There are a few important trade-offs here:
# 这些有一些重要的权衡
# 1. Durability: Unflushed data may be lost if you are not using replication.
# 2. Latency: Very large flush intervals may lead to latency spikes when the flush does occur as there will be a lot of data to flush.
# 3. Throughput: The flush is generally the most expensive operation, and a small flush interval may lead to excessive seeks.
# 1. 持久性:如果不使用复制，未刷新的数据可能会丢失。
# 2. 延迟:非常大的刷新间隔可能会在刷新时导致延迟，因为将会有大量数据刷新。
# 3. 吞吐量:刷新通常是最昂贵的操作，而一个小的刷新间隔可能会导致过多的搜索。
# The settings below allow one to configure the flush policy to flush data after a period of time or
# every N messages (or both). This can be done globally and overridden on a per-topic basis.
# 下面的设置允许你去配置刷新策略，每隔一段时间刷新或者一次N个消息（或者两个都配置）。这可以在全局范围内完成，并在每个主题的基础上重写。 # The number of messages to accept before forcing a flush of data to disk
# 在强制刷新数据到磁盘之前允许接收消息的数量
#log.flush.interval.messages=10000 # The maximum amount of time a message can sit in a log before we force a flush
# 在强制刷新之前，消息可以在日志中停留的最长时间
#log.flush.interval.ms=1000 ############################# Log Retention Policy ############################# # The following configurations control the disposal of log segments. The policy can
# be set to delete segments after a period of time, or after a given size has accumulated.
# 以下的配置控制了日志段的处理。策略可以配置为每隔一段时间删除片段或者到达一定大小之后。
# A segment will be deleted whenever *either* of these criteria are met. Deletion always happens
# from the end of the log.
# 当满足这些条件时，将会删除一个片段。删除总是发生在日志的末尾。 # The minimum age of a log file to be eligible for deletion due to age
# 一个日志的最小存活时间
log.retention.hours=168 # A size-based retention policy for logs. Segments are pruned from the log unless the remaining
# segments drop below log.retention.bytes. Functions independently of log.retention.hours.
# 一个基于大小的日志保留策略。只要剩下的部分不低于log.retention.bytes，段将从日志中删除。
#log.retention.bytes=1073741824 # The maximum size of a log segment file. When this size is reached a new log segment will be created.
# 每一个日志段大小的最大值。当到达这个大小时，会生成一个新的片段。
log.segment.bytes=1073741824 # The interval at which log segments are checked to see if they can be deleted according
# to the retention policies
# 检查日志段的时间间隔，看是否可以根据保留策略删除它们
log.retention.check.interval.ms=300000 ############################# Zookeeper ############################# # Zookeeper connection string (see zookeeper docs for details).
# This is a comma separated host:port pairs, each corresponding to a zk
# server. e.g. "127.0.0.1:3000,127.0.0.1:3001,127.0.0.1:3002".
# You can also append an optional chroot string to the urls to specify the
# root directory for all kafka znodes.
# 配置zookeeper地址，多个以逗号分隔，还可以在最后指定kafka存储的namespace：eg："127.0.0.1:3000,127.0.0.1:3001,127.0.0.1:3002/kafka"
zookeeper.connect=localhost:2181 # Timeout in ms for connecting to zookeeper
# 连接到Zookeeper的超时时间
zookeeper.connection.timeout.ms=6000 ############################# Group Coordinator Settings ############################# # The following configuration specifies the time, in milliseconds, that the GroupCoordinator will delay the initial consumer rebalance.
# 指定GroupCoordinator延迟初始消费者再平衡的时间(以毫秒为单位)
# The rebalance will be further delayed by the value of group.initial.rebalance.delay.ms as new members join the group, up to a maximum of max.poll.interval.ms.
# The default value for this is 3 seconds.
# 默认值是3秒
# We override this to 0 here as it makes for a better out-of-the-box experience for development and testing.
# However, in production environments the default value of 3 seconds is more suitable as this will help to avoid unnecessary, and potentially expensive, rebalances during application startup.
# 在生产环境中，3秒的默认值更合适
group.initial.rebalance.delay.ms=0
更多详细配置见官网：http://kafka.apache.org/documentation/#configuration
生产端配置
# Licensed to the Apache Software Foundation (ASF) under one or more
# contributor license agreements. See the NOTICE file distributed with
# this work for additional information regarding copyright ownership.
# The ASF licenses this file to You under the Apache License, Version 2.0
# (the "License"); you may not use this file except in compliance with
# the License. You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# see org.apache.kafka.clients.producer.ProducerConfig for more details ############################# Producer Basics ############################# # list of brokers used for bootstrapping knowledge about the rest of the cluster
# format: host1:port1,host2:port2 ...
bootstrap.servers=localhost:9092 # 指定数据压缩格式：none、gzip、snappy、lz4、zstd
compression.type=none # name of the partitioner class for partitioning events; default partition spreads data randomly
# 分区策略，默认随机
#partitioner.class= # the maximum amount of time the client will wait for the response of a request
# 客户端等待请求响应的最大时间，即在向 producer 发送 ack 之前，broker允许等待的最大时间
#request.timeout.ms= # how long `KafkaProducer.send` and `KafkaProducer.partitionsFor` will block for
# `KafkaProducer.send` and `KafkaProducer.partitionsFor`阻塞的时间
#max.block.ms= # the producer will wait for up to the given delay to allow other records to be sent so that the sends can be batched together
# 生产者将等待一个延迟，以便和其他的消息组合成一个批次发出，减少发送的请求数
#linger.ms= # the maximum size of a request in bytes
# 请求的最大字节数
#max.request.size= # the default batch size in bytes when batching multiple records sent to a partition
# 在批处理消息发送到一个分区的多个记录时的批处理大小，默认16k
#batch.size= # the total bytes of memory the producer can use to buffer records waiting to be sent to the server
# 生产者可以用来缓存消息的缓冲区大小
#buffer.memory= # 以下是默认配置文件没有的：更多 http://kafka.apache.org/documentation/#producerconfigs # 在请求完成之前，生产者要求leader已收到确认消息的数量。
# 0：生产者不会等待服务器的ack响应，不保证服务器收到消息，返回的偏移量总是-1
# 1：leader将消息写入本地日志，但不会管其他follower是否写入。
# all：leader和所有的follower都成功同步消息才会返回ack，保证消息不会丢失。all等价于-1.
acks=
